Water Activity Powered By SKALA metergroup.com/food/products/skala-aq1 Manage costs. Manage compliance. Get ready to grow. Request a quote Contact us SKALA AQ1 You need more than water activity Water activity. You have to measure it. Most people grab the cheapest water activity meter they can find to get the inspector off their backs. But what if there was an affordable, entrylevel water activity meter that helped you manage your costs and manage compliance? Perfect fit plus room to grow Introducing the AQ1. It’s an entry-level water activity meter powered by SKALA, our most advanced process automation platform for food. And it’s priced to fit a start-up budget. If you’re small enough to be running a one-person lab, you qualify for the AQ1 single-user package—a setup that lets you run lean but ready to grow.

Do it right so you don’t have to do it over SKALA’s touchscreen HUB and web-based Control module meet you where you are and expand as you do. Plug in the AQ1—and your pH meter, moisture meter, scale, whatever instruments you’re using. The HUB connects to anything with a serial port. It gathers data directly from the instruments and records readings digitally. No messy records, no mistakes. As you grow, you can connect it to sensors in your freezer, drying room, curing chamber, and refrigerators. Monitor humidity and temperature in real time from your phone or computer. When you get big enough...

The AQ1 is an affordable, entry-level meter and so much more because it's powered by SKALA. It's not just powerful enough to grow with you—it's powerful enough to help you grow. See how the SKALA-powered AQ1 can open doors, cut costs, and drive profits. Request a quote Contact us See how it works Features Specifications Accessories Support Request a quote Features • Automatically records and compares reading to predefined water activity specs • Identifies which readings are in spec and audit ready • Connect up to seven other lab instruments you already own—pH meter, scale, moisture balance, refractometer...

The AQUALAB 3 is an IIoT device. In order to use it, please consult with your IT department to be sure you have: - Wi-Fi access in the location where AQUALAB 3 will be used - An Ethernet port for the Nexus connection - A Wi-Fi enabled iPad iPad 5th Generation (9.7 inch) with iOS 11.2 or later (iPad may be purchased with your AQUALAB 3) - Reliable local network and internet connections - Ethernet and WiFi must be on the same network - Port 80,443, and 123 enabled Note: the Nexus and the iPad must be able to communicate with each other on your internal network and with our cloud servers. For more...