*mydirectindustry

METECEE

Product catalog summary

Overview

This document provides comprehensive technical information on METE/R R Industrial IEC plugs and sockets, designed for industrial electrical connections and compliant with IEC/EN 60309-1 and IEC 60309-2 standards. It covers product specifications, design features, installation procedures, product variants, and best practices.

Standards and Compliance

Conformance to IEC/EN 60309-1 and IEC 60309-2 standards ensures safety and compatibility.
Operating ambient temperature range: -25°C to +40°C.
Protection ratings include IP44 (general industrial use) and IP67 (dust-tight and water immersion protection).
Mechanical impact resistance ratings vary by current rating: IK08/IK09 for 16A/32A and IK09/IK10 for 63A/125A.

Product Design and Features

Earthing Contact Position

Standardized earthing contact positions per IEC 60309-2, adapted for voltage, frequency, and specific applications such as ship installations and refrigerated containers.

Closing Mechanism

Automatic locking with audible click, eliminating need for additional locks.
Opening facilitated by turning a flat-head screwdriver clockwise.
Outer body parts open and close by 90° turns to prevent cable damage.
Durable construction with four threaded screws for high endurance.

Cable Tightening System

Saw-type thread mechanism prevents accidental loosening.
Flexible leaves accommodate various cable diameters without damage.
Draining holes prevent water ingress by allowing drainage.
Internal space increased by 25-30% compared to traditional collars for easier cable accommodation.

Terminals

16A and 32A models use screwless push-type terminals enabling quick, maintenance-free installation without ferrules or crimping tools.
Push-type terminals feature self-cleaning, corrosion-resistant springs and high conductivity due to high copper content.
Box terminals provide large contact surfaces for excellent conductivity.
Contact sleeves and pins are designed for self-cleaning and resistance to arcing damage.

Technical Specifications

Cable Diameter Ranges: 16A (8.1–14 mm), 32A (10–15.3 mm), 63A (11.5–19.3 mm), 125A (26–50 mm).
Terminal Thread Sizes: M3.5 (16A/32A), M5 (63A), M10 (125A).
Voltage and Frequency Ratings: Support for 220-240 V (50/60 Hz), 380-415 V (50/60 Hz), 440-460 V (60 Hz special applications), and 600-690 V (50/60 Hz).

Product Types and Variants

Wide range including plugs (flanged straight/angled, wall-mounted), connectors, flanged sockets, wall-mounted sockets (including switched), multiple socket outlets, adapters, and combination units.
Configurations vary by number of contacts (e.g., 2P+E, 3P+E, 3P+N+E), current rating (16A, 32A, 63A, 125A), protection degree (IP44, IP67), voltage rating, earth contact position (e.g., 6h), terminal type (quick connect or screw), and packaging quantity.

Installation and Maintenance

Specified cable stripping lengths (e.g., 9-14 mm depending on current rating).
Cable insertion secured by pushing locking pin upward; release by pushing downward.
Closing mechanism locked before tightening nut is turned to secure cable and enhance sealing.
Products are maintenance-free post-installation and resistant to shock and vibration.

Key Benefits and Best Practices

Reliable, simple locking mechanism reduces installation time and risk of damage.
Push-type terminals eliminate need for ferrules and crimping tools, simplifying wiring.
Special cable tightening system safely accommodates a wide range of cable sizes.
High IP and IK ratings ensure durability in harsh industrial environments.
Self-cleaning contact design enhances long-term conductivity and reduces maintenance needs.
Selection guidance includes matching current rating, voltage, protection degree, earth contact position, and terminal type to application requirements.
Use IP67 rated products for environments with high dust and water exposure.
Choose angled or straight variants based on installation space and cable routing.

Summary

METE/R R Industrial IEC plugs and sockets provide a robust, standardized, and user-friendly solution for industrial electrical connections. Their design prioritizes safety, ease of installation, durability, and compliance with international standards. The extensive product range supports diverse industrial applications with reliable performance and flexible configurations.

Catalog excerpts

INDUSTRIAL IEC PLUGS AND SOCKETS

Open the catalog to page 1

INDUSTRIAL IEC PLUGS AND SOCKETS

Open the catalog to page 2

INDUSTRIAL IEC PLUGS AND SOCKETS Position of the Earthing Contact acc. to IEC 60309-2 (1) Mainly for ship installations (2) Only for refrigerated containers : direct current

Open the catalog to page 3

Reliable Closing Mechanism Closing mechanism is locked automatically with a click sound. There is no need to make an extra adjustment or for another locking mechanism. Can be opened easily, quickly and without any damage by the help of a flat head screwdriver. As it can be seen on the body, turning the screwdriver in clockwise direction is enough to open the locking mechanism. Simple Setting, Opening and Closing With Threads The outer parts of the body delivered semi unlocked. To open it simply turn the parts 90° counterclockwise direction. To close it tum them 90° clockcwise direction. In this...

Open the catalog to page 4

INDUSTRIAL IEC PLUGS AND SOCKETS Cable stripping length (a) Push-Type Terminals ■ Strip the cable as per “a” measurement as indicated in the above table. ■ Insert the stripped part of the cable into the terminal hole. ■ Push-up the locking pin in arrowed (Picture 2) direction. Cable is locked into its hole with a special spring system. ■ To release the cable, push-down the locking pin in arrowed (Picture 3) direction. ■ After locking closing mechanism on bodies of plugs and connectors, fix the main cable by turning the tightening nut on the product to provide better sealing. Screwless Push-Type...

Open the catalog to page 5

Metric thread M3,5 for 16A M3,5 for 32A M5 for 63A M10 for 125A Ensures a firm contact pressure. Box terminals Cable ferrules are not necessary and large contact surface for excellent conductivity. Open contact sleeve Dust and dirt will not remain in the sleeve thus reduces the potential of contact heating. One piece contact sleeve Ensures excellent conductivity. Special design Ensures self-cleaning effect of the contact area for sleeves and pin. Stainless steel clip ring Ensures a stable contact pressure with optimal insertion and removal forces. Special design In case of arching no damage occurs...

Open the catalog to page 6

INDUSTRIAL IEC PLUGS AND SOCKETS Ampere & Poles Cable Diameters No more tightening with cable collars! Tightening of the cable can be seen at the cross section at left. In this way, the space inside the body increases up to 25-30%. Flexible Leaves Screwless push-type terminals (for 16A and 32A) AIE METE ENERji pohierfml

Open the catalog to page 7

Simple and Reliable Tightening Mechanism Special tightening mechanism prevent from accidental loose by the help of saw type thread. Special Flexible Leaves Tightening the special mechanism makes 18 flexible leaves encircle different sizes of cables from min. to max. and fixes the cable without any damage. AIE METE ENERji pohierfml

Open the catalog to page 8

INDUSTRIAL IEC PLUGS AND SOCKETS 406201 FLANGED PLUG Straight Number of Contacts 406202 FLANGED PLUG Angled Number of Contacts 406301WALL MOUNTED PLUG Number of Contacts

Open the catalog to page 9

406501 FLANGED SOCKET Angled Number of Contacts 406502 FLANGED SOCKET Straight Number of Contacts 406602WALL MOUNTED SOCKET Number of Contacts

Open the catalog to page 10

INDUSTRIAL IEC PLUGS AND SOCKETS 406201V FLANGED PLUG Straight Number of Contacts 406202V FLANGED PLUG Angled Number of Contacts 406301VWALL MOUNTED PLUG Number of Contacts

Open the catalog to page 11

406501V FLANGED SOCKET Angled Number of Contacts 406502V FLANGED SOCKET Straight Number of Contacts 406602VWALL MOUNTED SOCKET Number of Contacts

Open the catalog to page 12

INDUSTRIAL IEC PLUGS AND SOCKETS 406678V WALL MOUNTED SOCKET Switched 406701V MULTIPLE SOCKET OUTLET

Open the catalog to page 13

406203V FLANGED PLUG Straight Number of Contacts 406204V FLANGED PLUG Angled Number of Contacts 406302VWALL MOUNTED PLUG Number of Contacts

Open the catalog to page 14

INDUSTRIAL IEC PLUGS AND SOCKETS 406503V FLANGED SOCKET Angled Number of Contacts 406504V FLANGED SOCKET Straight Number of Contacts 406603VWALL MOUNTED SOCKET Number of Contacts

Open the catalog to page 15

406684V WALL MOUNTED SOCKET Switched 406702V MULTIPLE SOCKET OUTLET

Open the catalog to page 16

INDUSTRIAL IEC PLUGS AND SOCKETS 406206 FLANGED PLUG Angled Number of Contacts 406505 FLANGED SOCKET Angled Number of Contacts

Open the catalog to page 17

406506 FLANGED SOCKET Straight 406605 WALL MOUNTED SOCKET

Open the catalog to page 18

INDUSTRIAL IEC PLUGS AND SOCKETS 406205V FLANGED PLUG Straight Number of Contacts 406206V FLANGED PLUG Angled Number of Contacts 406303VWALL MOUNTED PLUG Number of Contacts

Open the catalog to page 19

406505V FLANGED SOCKET Angled Number of Contacts 406506V FLANGED SOCKET Straight Number of Contacts 406605VWALL MOUNTED SOCKET Number of Contacts

Open the catalog to page 20

INDUSTRIAL IEC PLUGS AND SOCKETS 406679V WALL MOUNTED SOCKET Switched

Open the catalog to page 21

406207V FLANGED PLUG Straight Number of Contacts 406208V FLANGED PLUG Angled Number of Contacts 406304VWALL MOUNTED PLUG Number of Contacts

Open the catalog to page 22

INDUSTRIAL IEC PLUGS AND SOCKETS 406507V FLANGED SOCKET Angled Number of Contacts 406508V FLANGED SOCKET Straight Number of Contacts 406606VWALL MOUNTED SOCKET Number of Contacts

Open the catalog to page 23

406685V WALL MOUNTED SOCKET Switched Number of Contacts <I> AIE METE ENERji pohierfml

Open the catalog to page 24

INDUSTRIAL IEC PLUGS AND SOCKETS 406209 FLANGED PLUG Angled Number of Contacts 406210 FLANGED PLUG Angled Number of Contacts 406305WALL MOUNTED PLUG Number of Contacts

Open the catalog to page 25

406509 FLANGED SOCKET Angled Number of Contacts 406510 FLANGED SOCKET Straight Number of Contacts 406607WALL MOUNTED SOCKET Number of Contacts

Open the catalog to page 26

INDUSTRIAL IEC PLUGS AND SOCKETS 406209V FLANGED PLUG Straight Number of Contacts 406210V FLANGED PLUG Angled Number of Contacts 406305VWALL MOUNTED PLUG Number of Contacts

Open the catalog to page 27

406509V FLANGED SOCKET Angled Number of Contacts 406510V FLANGED SOCKET Straight Number of Contacts 406607VWALL MOUNTED SOCKET Number of Contacts

Open the catalog to page 28

INDUSTRIAL IEC PLUGS AND SOCKETS 406650VCOMBINATION UNIT Number of Contacts

Open the catalog to page 29

406211V FLANGED PLUG Straight Number of Contacts 406212V FLANGED PLUG Angled Number of Contacts 406307VWALL MOUNTED PLUG Number of Contacts

Open the catalog to page 30

INDUSTRIAL IEC PLUGS AND SOCKETS 406511V FLANGED SOCKET Angled Number of Contacts 406512V FLANGED SOCKET Straight Number of Contacts 406609VWALL MOUNTED SOCKET Number of Contacts

Open the catalog to page 31