for Soldering / De-Soldering / Rework Connection Validation Cartridges
19Pages

SELECTION GUIDE for Soldering / De-Soldering / Rework Connection Validation Cartridges For use with: CV-5200, CV-500 and MX- 5000/5200, MX-500 SOLDER SYSTEMS www.okinternational.com - www.metcal.com

CVC Cartridges are compatible with MX-500, MX-5000, MX-5200 and CV-5200, CV-500 Systems MX-RM3E, MX-RM6E, MX-H1-AV, MX-H7-SF - CV-H1-AV and CV-H7-AV Solder Hand pieces. STTC Cartridges are compatible with MX-500, MX-5000 and MX-5200 Systems - MX-RM3E, MX-RM6E, MX-H1-AV and MX-H7-SF Solder Hand pieces. Temperature Temperature Sensitive Most Standard Ceramic and High Thermal Demand Please note the above temperatures are the maximum temperatures of the heater. The idle temperature is dependent on the geometry of the cartridge (up to 15 ˚C lower.) www.okinternational.com - www.metcal.com Long...

www.okinternational.com - www.metcal.com Optimised geometry for best thermal performance, (W x L) 1.0 x 6.0 mm (.04" x .24") Long reach, for work in tight spaces, (W x L) 1.0 x 12.4 mm (.0.4" x .0.49") Optimised geometry for best thermal performance, (W x L) 1.4 x 6.0 mm (.06" x .24") Long reach, for work in tight spaces, (W x L) 1.5 x 12.4 mm (.06" x 0.49") Bent 30°, for work under a microscope, (W x L) 1.5 x 11.9 mm (.06" x .47") Long reach, flat, for work in tight spaces, (W x L) 1.78 x 16mm (.07" x .63") Long life plating, (W x L) 1.78 x 1.0 mm (.07" x .24")

Optimised geometry for best thermal performance, (W x L) 1.8 x 6.0 mm (.07" x .24") Bend 30°, for work under a microscope, (W x L) 1.8 x 10.0 mm (.07" x0.4") Optimised geometry for best thermal performance, (W x L) 2.0 x 4.7 mm (.08" x .19") Long reach, for work in tight spaces, (W x L) 2.0 x 12.4 mm (.08" x 0.49") Long reach, for work in tight spaces, (W x L) 2.5 x 12.4 mm (.10" x .49") www.okinternational.com - www.metcal.com Optimised geometry for best thermal performance, (W x L) 2.5 x 6.0 mm (.10" x .24") Optimised geometry for best thermal performance, (W x L) 3.0 x 4.8 mm (.12" x .19")

www.okinternational.com - www.metcal.com Optimised geometry for best thermal performance, (W x L) 3.5 x 6.13 mm (.14" x .24") Long reach, flat, for work in tight spaces, (W x L) 3.8 x 21.6 mm (.15" x .85") Optimised geometry for best thermal performance, (W x L) 4.2 x 6.0 mm (.165" x .24") Optimised geometry for best thermal performance, (W x L) 5.23 x 6.0 mm (.21" x .24”)

www.okinternational.com - www.metcal.com Fine, long reach, for work in tight spaces, (ø x L) 0.25 x 13.2 mm (.01"x .52") Sharp, optimised geometry for best thermal performance, (ø x L) 0.4 x 8.5 mm (.016" x .34" Sharp, Bent 30°, for work under a microscope, (ø x L) 0.4 x 7.9 mm (.016" x .31") Sharp, long reach, (ø x L) 0.4 x 13.7 mm (.016"x .54") Sharp, long reach, (ø x L) 0.4 x 14.7 mm (.016"x .58") Sharp, long reach, bent 30°, for work under a microscope, (ø x L) 0.4 x 16 mm (.016" x .63") Sharp, long reach, (ø x L) 0.5 x 15.2 mm (.02" x .6") Sharp, long reach, bent 30°, for work under a...

www.okinternational.com - www.metcal.com Blunt, Optimised geometry for best thermal performance, (ø x L) 0.5 x 4.8 mm (.02" x .19") Optimised geometry for best thermal performance, (ø x L) 1.0 x 6.5 mm (.04" x .25") Bent 30°, for work under a microscope, Long Reach, for work in tight spaces, (ø x L) 1.3 x 21.8 mm (.05" x .86") Blunt, optimised geometry for best thermal performance, (ø x L) 2.0 x 4.3 mm (.8" x .17")

U- / V-Groove Cartridges – For Pin Soldering CVC-5LG1802A CVC-6LG1802A CVC-7LG1802A CVC-8LG1802A U-Groove for pin soldering, groove (ø x L) 0.89 x 8.4 mm, (Total ø x L) 1.9 x 17.8 mm (.08" x .70") V-Groove for pin soldering, grove (W x L) 0.8 x 3 mm, (W x L) 1.6 x 6.12 mm (.06" x .25") V-Groove for pin soldering, Optimised geometry for best thermal performance, grove (W x L) 0.8 x 3,5 mm, (W x L) 1.6 x 6 mm (.06" x .24") V-Groove for pin soldering, grove (W x L) 1.0 x 3 mm, (W x L) 3.2 x 10.35 mm (.12" x .41") V-Groove for pin soldering, Optimised geometry for best thermal performance,...

SMC Rework Cartridges are compatible with MX-500, MX-5000, MX-5200 and CV-5200, CV-500 Systems – MX-RM3E, MX-RM6E, MX-H1-AV, CV-H1-AV Solder Hand pieces. SMTC Rework Cartridges are compatible with MX-500, MX-5000 and MX-5200 Systems MX-RM3E, MX-RM6E and MX-H1-AV Solder Hand pieces. Temperature Application Temperature Sensitive Most Standard Ceramic and High Thermal Demand Please note the above temperatures are the maximum temperatures of the heater. The idle temperature is dependent on the geometry of the cartridge (up to 15 ˚C lower.) These tips will provide data via the CV series power...

www.okinternational.com - www.metcal.com Micro Hoof, (Bevel/L) 60° x 1.78 mm, (ø x L) 0.89 x 11.43 mm (.035"x.45") Micro Hoof, (Bevel/L) 60° x 2.28 mm, long reach, (ø x L) 1.14 x 16.51 mm (.045"x.65") Concave Hoof, (Bevel/L) 60° x 3 mm, (Bevel length/depth) 2.08 x 0.26 mm, (ø x L) 1.5 x 11.6 mm (.059” x .457”) Hoof, (Bevel/L) 30° x 1.76 mm, long reach, (ø x L) 1.52 x 16.51 mm (.06"x.65") Concave Hoof, (Bevel/L) 60° x 4 mm, (Bevel length/depth) 2.96 x 0.35 mm, (ø x L) 2,0 x 11.6 mm (.079” x .457”) Hoof, (Bevel/L) 60° x 4.06 mm, long reach, (ø x L) 2.03 x 15.24 mm (.08" x .60") Concave Hoof,...

Hoof, (Bevel/L) 60° x 6.1 mm, long reach, (ø x L) 3.05 x 15.24mm (.12" x.60") Hoof, (Bevel/L) 60° x 6.6 mm, long reach, (ø x L) 3.3 x 17.78 mm (.13" x .70") Hook – for fine drag- and point-topoint soldering on contacts from Jlead components, bend 30°, (ø x L) 0.51 x 15.24 mm (.02"x.06") Used to remove small components like 0201 and 0402 from a “topside” angle, bent 30° for work under a microscope, (ø x L) 0.76 x 16.51 mm (.03"x .65") www.okinternational.com - www.metcal.com Knife, 45° angled, tinned area length 2.03 mm, (W x L) 2.5 x 12.0 mm (.098” x .472”) Knife, 45° angled, tinned area...