Plasma PS50M-PC The Metallisation PS50M-PC is the latest development to our 50kW Atmospheric Plasma Spray (APS) system. All of the great features of the PS50M have been retained: the system is still mass flow controlled for repeatable coating quality and the operator interface is still very simple. The latest developments are to the powder feeder and operator interface. The powder feeder has mass flow controlled carrier gas and closed loop motor control for reliability and repeatability of powder feed rates. The operator interface is still simple to follow but is now via touch screen rather than pushbuttons. The result is a high quality, compact and easy to use Plasma system. Mass flow control of primary, secondary and carrier gases = repeatability Inverter power supply = stability Easy to use, intuitive operator interface PC control with touch screen operator interface Optional keyboard control or operator interface unit Unlimited recipes and parameter recording Manual or fully sequenced start-up,operation and shut-down Straight, 90 degree and extension guns Internal and external powder ports Safety interlocks to prevent running without coolant and gases Argon primary and Nitrogen, Helium or Hydrogen secondary gases Can operate non-Metallisation pistols Typical Material Powder Reference Throughput Grams/min Deposit Efficiency % Grey Alumina Alumina Titania Chrome Oxide Magnesium/Zirconium Oxide Nickel Aluminium Moly Tungsten Carbide/Cobalt 99205 99220 99225 99275 99627 99735 20 24 39 38 51 55 67 76 47 75 67 75 All figures are approximate. www.metallisation.com +44 (0)1384 252 464 Typical Applications: Print rolls / Analox rolls Paper rolls Mechanical Seals Aerospace engine Aerospace airframe Wire Drawing Capstans Automotive valves Base Coat to Non-Stick Surfaces such as Teflon