Arcspray 340-PLC The Metallisation ARC340 system is the preferred choice for general engineering applications. It is ideally suited to tool post and automation mounted applications with occasional requirements for hand spraying.The proven ARC340 pistol is now combined with a new range of PLC controlled 250A and 350A switched voltage energisers. This creates a range of systems that provide reliability, flexibility and great useability.The ARC340 pistol supersedes and can be fitted as a direct replacement to the ARC375, ARC234 and ARC240 pistols. PLC controlled energisers = reliabilty Over-current protection Air driven pull system Air cooled or solid cables Easy to maintain Material Reference Aluminium 01E Zinc 02E Uses wires from 1.6-2.3mm dia. without changing feed rollers Choice of coating textures Optional Arcbeam spray concentrator Optional deflected spray extension sections Normal Diameter* 1.6mm 2.0mm 2.3mm 2.0mm 2.3mm 1.6mm 2.3mm 1.6mm 1.6mm 2.3mm 1.6mm 2.3mm Maximum Throughput kgs/h† Maximum Coverage m2/kg/100um 8.5 2.86 36 0.82 05E Nickel Aluminium Bronze 06E Phosphor Bronze 15E 75E 70E, 71E 1.6mm 1.6mm 0.91 1.02 13.6 1.37 19 0.91 1.02 16.4 17.2 0.91 1.02 1.6mm Steels 30E, 35E 45E, 55E 57E, 60E 65E, 80E 84E 15 13.6 13.6 Copper Bond Monel 10E 2.3mm * Throughput is independant of wire diameter prefered diameter shown in bold. † Throughput based on standard spray parameters with Metallisation wires at spraying current of 300A or 350A in italics. www.metallisation.com +44 (0)1384 252 464 Typical Applications: Engineering coatings Reclaiming parts Bearing and seal surfaces Print rollers Anti-spark coatings Wear coatings Small anti-corrosion applications