PROGRAMMABLE STEPPING MOTOR DRIVE

Product catalog summary

Technical Specifications:
The programmable stepping motor drive operates with a motion control logic power supply of 24 VDC and a drive power supply ranging from 24 to 55 VDC. It supports a motor phase peak current of 1 to 6 A and functions within a temperature range of -20 to 40°C. The device accommodates relative humidity levels from 5 to 85% without condensation and is designed for bipolar motors with an inductance of 1 to 12 mH. The dimensions are 148 x 99 x 50.5 mm, with a weight of 790 g, and it has an IP20 protection rating.

Communication and Control:
The drive features a serial USB port for PC connection and utilizes MW DRIVE software for configuration, programming, debugging, and diagnostics in a Windows® environment. It includes 14 digital inputs, 7 digital outputs, 2 analogue inputs (0 to 10V), and 1 analogue output (0 to 10V). The system supports various step modes and includes features like automatic current reduction, dynamic current regulation, and closed-loop motion control.

Design and Installation:
The drive consists of two electronic boards housed in a metal box, suitable for wall or DIN rail mounting. It includes removable screw connectors for wiring and is designed for standalone applications without the need for a PLC. The power stage is a ministep bipolar chopper drive, offering flexibility and compactness.

Accessories and Connectivity:
Accessories include a bracket for mounting on an Omega bar (DIN EN 50022) and various Phoenix Contact connectors for board connections. A USB cable is provided for connecting the drive to a PC.

Additional Notes:
The document notes that dimensions and data are subject to change without prior notice.

Catalog excerpts

^mETAL* WLUORK PNEUMATIC PROGRAMMABLE STEPPING MOTOR DRIVE -

Open the catalog to page 1

It can be used to control, easily and intuitively, electric cylinders that use a STEPPING motor with a rated current of up to 6A, two phases, with four, six or eight output wires. It connects up to a PC via a USB port and the user is provided with motion control configuration, programming and debugging environment, which allows you to create complex work cycles as it can handle both digital and analogue inputs and outputs, thanks to a user-friendly language (MW DRIVE) and a series of simple instructions and functions. It consists of two electronic boards housed in a metal box that has been designed...

Open the catalog to page 2

TECHNICAL DATA DIMENSIONS TECHNICAL DATA PROGRAMMABLE STEPPING MOTOR DRIVE - E.DRIVE TECHNICAL DATA TECHNICAL DATA TECHNICAL DATA TECHNICAL DATA TECHNICAL DATA TECHNICAL DATA Below is a list of Phoenix Contact codes for the board connectors. TECHNICAL DATA TECHNICAL DATA Description 2-pin plug with screw connection, MC 1.5/2 - ST - 3.5 3-pin plug with screw connection, MC 1.5/3 - ST - 3.5 4-pin plug with screw connection, MC 1.5/4 - ST - 3.5 7-pin plug with screw connection, MC 1.5/7 - ST - 3.5 8-pin plug with screw connection, MC 1.5/8 - ST - 3.5 3-pin plug with screw connection, MSTB 2.5/3...

Open the catalog to page 3

TECHNICAL DATA CABLE USB TECHNICAL DATA PROGRAMMABLE STEPPING MOTOR DRIVE - E.DRIVE Code Description 37C0030000 Cable for USB 2.0 male A-B connector with ferrite core, for connecting the e.motion / e.drive board to a PC, 3 m TECHNICAL DATA TECHNICAL DATA CONNECTION SCHEME TECHNICAL DATA TECHNICAL DATA TECHNICAL DATA NOTES TECHNICAL DATA TECHNICAL DATA TECHNICAL DATA TECHNICAL DATA TECHNICAL DATA Dimensions and data shown in this catalogue are subject to variations at any time without prior notice

Open the catalog to page 4

PROGRAMMABLE STEPPING MOTOR DRIVE

PROGRAMMABLE STEPPING MOTOR DRIVE

Catalog excerpts

All METAL WORK catalogs and technical brochures