^mETAL* WLUORK PNEUMATIC GRIPPERS SERIES P3K - P12K

GRIPPER WITH TWO PARALLEL JAWS SERIES P3K Parallel double-acting two-jaw gripper, with either internal or external clamping. Aluminum alloy body coated with surface hardening treatment; jaws made of wear-resistant coated steel. The jaw-guiding system and precision in coupling with the body make the gripper extremely stable. The ceramic-coated body reduces friction and wear, and enhances the movement of the jaws on the body. All sizes are available in the version with standard stroke and clamping force, while only some in the version with reduced stroke but with higher clamping torque. _ The gripper...

/'TsfTlElAi: WUJORK PNEUMATIC DIAGRAM OF FORCES AND MOMENTS F Clamping force for each jaw Fa Maximum static axial force Mx, My, Mz Maximum static moments cm & o V-Lock MOUNTING OPTIONS Standard Lateral I— £ cm LU a_ Q— cm o Unscrew the 4 screws ©, remove the plate @ and pull out the centring rings @. Then unscrew the 2 plugs @. Replace the 2 plugs @ on the opposite side of the gripper and insert the 2 centring rings @. Position the plate @ and the two long screws © (supplied with the gripper). On the opposite side of the plate, insert the two nuts with a screwdriver slot © (supplied with...

GRIPPER WITH TWO PARALLEL JAWS SERIES P3K Block for version with an inductive sensor NOTE: For standard dovetail dimensions, see chapter V-Lock adaptors. Description Gripper with 2 parallel jaws P3K-64 Gripper with 2 parallel jaws P3K-64 for inductive sensor

/'TsfTlElAi: WUJORK PNEUMATIC DIMENSIONS OF GRIPPER P3K-80 Standard version Increased force version 8 bar Code Description W1560800200K Gripper with 2 parallel jaws P3K-80 W1560800201K Gripper with 2 parallel jaws P3K-80 for inductive sensors W1560800220K Gripper with 2 parallel jaws P3K-80 increased force W1560800221K Gripper with 2 parallel jaws P3K-80 increased force for inductive sensors

GRIPPER WITH TWO PARALLEL JAWS SERIES P3K Block for version with an inductive sensor View from “B” Increased force version View from “B” standard version NOTE: For standard dovetail dimensions, see chapter V-Lock adaptors. Standard version Increased force version Description Gripper with 2 parallel jaws P3K-100 Gripper with 2 parallel jaws P3K-100 for inductive sensors Gripper with 2 parallel jaws P3K-100 increased force Gripper with 2 parallel jaws P3K-100 increased force for inductive se

SENSOR 0 4 For codes and technical data, see chapter A6. CENTRING RING Code Size 0A 0B p C

Parallel double-acting three-jaw gripper, with either internal or external clamping. Aluminum alloy body coated with surface hardening treatment; jaws made of wear-resistant coated steel. The jaw-guiding system and precision in coupling with the body make the gripper extremely stable. The ceramic-coated body reduces friction and wear, and enhances the movement of the jaws on the body. All sizes are available in the version with standard stroke and clamping force, while only some in the version with reduced stroke but with higher clamping torque.The gripper is equipped with a magnet and grooves...

/'TsfTlElAi: WUJORK PNEUMATICDIAGRAM OF FORCES AND MOMENTS «/» of O 5 Clamping force for each jaw Maximum static axial force Maximum static moments EXAMPLES OF APPLICATION I— £ CxZL LU a_ Q— O

GRIPPER WITH THREE PARALLEL JAWS SERIES P12K Block for version with an inductive sensor NOTE: For standard dovetail dimensions, see chapter V-Lock adaptors. Description Gripper with 3 parallel jaws P12K-64 Gripper with 3 parallel jaws P12K-64 for inductive sensors

Standard version Increased force version View from “B” GRIPPER WITH THREE PARALLEL JAWS SERIES P12K Block for version with an inductive sensor NOTE: For standard dovetail dimensions, see chapter V-Lock adaptors. Standard version Increased force version Description Gripper with 3 parallel jaws P12K-80 Gripper with 3 parallel jaws P12K-80 for inductive sensors Gripper with 3 parallel jaws P12K-80 increased force Gripper with 3 parallel jaws P12K-80 increased force for inductive sensors

GRIPPER WITH THREE PARALLEL JAWS SERIES P12K Standard version Increased force version Block for version with an inductive sensor NOTE: For standard dovetail dimensions, see chapter V-Lock adaptors. Standard version Increased force version Description Gripper with 3 parallel jaws P12K-100 Gripper with 3 parallel jaws P12K-100 for inductive sensors Gripper with 3 parallel jaws P12K-100 increased force Gripper with 3 parallel jaws P12K-100 increased force for inductive sensor

/'TsfTlElAi: WUJORK PNEUMATICSENSOR 0 4 For codes and technical data, see chapter A6. Dimensions and data shown in this catalog ue are subject to variations at any time without prior notice