Others protection systems
8Pages

Soffietti \ Bellouus The bellouus can be sewn, glued or heat-sealed. The material and shape may change according to use. Special linings uuith stainless steel blades are available to increase the strength of the bellouu uuhen it comes into contact uuith The Figures belouu are For standard shapes; For any other shape check uuith our Technical Dept.

Traverse speed AXIS AMD/OR WORK POSITION MB.: COMPLETE PILL PARTS OF THE FORM FOR A REALISTIC ESTIMATE SHAPE CHOSEM (SEE PRECEDIMG PAGE) 5j,je (Select if the bellows are on the opposite side compared with the illustration on the preceding page) ABBREVIATION FOR BELLOWS SHAPE L = BELLOWS LEMGTH PIP = FOLD HEIGHT SPECIFIC REQUESTS BELLOWS TYPE

www.metalgennari.it Soffietti \ Bellows The blades are made of stainless steel. They are used in environments where large-size chip is present. Especially suitable where acids are present. They may be moveable or fixed.

Circular bellows are supplied sewn, glued or heat- sealed. They are used when a very short compres- sed length is required or when good resistance to rotation is needed. They can be fixed using a Nat- Pace or ring-Pace Plange. To Pacilitate assembly they may be made with a lengthwise opening. In this way, they can be Pitted without having to dismantle the part needing protection. FORM TO REQUEST fiM ESTIMATE Traverse speed AXIS (TO/OR WORK R05ITI0M FLflMGE RIMQ Total extension Closed length Plange hole centres d = Plange ends external

Molle a Bovolo \ Spiral spring covers The spiral spring cover for ball screuus is a single steel protection. It is normally used For the protection of ball screuus and shafts installed in the machine tools. It protects the equipment against chips, dust and coolants, uuithout com- promising the normal operation of the machine, but aluuay5 guaranteeing the maximum protec- They are delivered (in steel band that is uurapped around the balls screuu or shaft) and can easily FORM TO REQUEST Pin ESTIMATE Axis and/or work position The necessary and easily measurable dimensions for the choice of the...

Protezioni avvolgibili \ Roll-Up Covers Roll-up covers are used to protect the sliding guides of the machine against dust, coolants and chips and can be manu- factured WITH or WITHOUT housing. The extensible tissue is made of high quality materials (neoprene, polyurethane, PVC, steel) according to the type of metal chip. Roll-up covers can be installed vertically, horizontally and diagonally where the space is limited and doesn't allow the assembly of other types of protections. They are noiseless, easy and quick to assemble, they have a long lifetime and reduced overall dimensions even at...

Protezioni avvolgibili \ Roll-Up Covers OVERHAUL OF WORN ROLL- UP COVER5 IP possible and cost-effective, Metal Qennari can carry out the overhaul of roll-up covers at its uuorkshop, on the basis of a cost estimate. The overhaul of roll-up covers consist Replacement of the extensible tissue Check/repair of the inner return elements If the roll-up cover is too damaged, Metal Qennari can provide a neuu one with the same

Tapparelle \ Plpron covers Plpron covers are used to protect the machine guides against dust, coolants and chips; they are noiseless, easy and quick to assemble, they have a long lifetime and can work under high temperatures, assuring the highest protection. FLEXIBLE apron covers are made of aluminium, while RIVETED apron covers are made of aluminium, steel or brass, according to the type of chip. Both covers can be installed vertically or horizontally. Pixis and/or work position PIPROM TYPE FLEXIBLE RIVETED CUSTOMER DRAWING LOWER ATTACHMENT