Inspection systems for the hygiene industry

Reliable, precise and user-friendly X-ray inspection systems, metal detectors and separators from Mesutronic Why detect foreign bodies? Despite all safety precautions, the contamination of hygiene products with foreign substances is unfortunately a problem in every manufacturing company. The effects are often dramatic if these are not reliably detected and removed from the production chain. Damage to processing machines, problems during audits, loss of supplier contracts and, in the worst case, severe image problems among consumers are often the result of inadequate control systems. In addition,...

Production The use of detection systems at different stages of the production process allows increased process reliability and a reduction in the costs caused by foreign bodies. On the one hand, mechanical processing machines such as mills or extruders can be protected against damage. On the other hand, at this point, product components discharged with metals are associated with significantly reduced loss of value in the production chain. Depending on the type of product, this point in the process can also be a CCP if a check after the final packaging is not possible or associated with significantly...

Outgoing goods area In packaging, the task of quality assurance is of prime importance. According to the HACCP criteria, a final check for foreign bodies should take place if re-contamination can be excluded. This usually means the inspection of the product when its primary packaging is closed. Inspection in any secondary packaging is also possible. However, here a check must be made of whether the recognition accuracy at this point is still sufficient. The most common variant of inspection in this area are conveyor belt systems of the TRANSTRON type. As a supplement to our metal detectors, they...

X-ray inspection In the hygiene sector in particular, inspection for foreign bodies by means of X-rays offers various advantages in addition to the search for metals alone. In addition to the detection of other types of contamination such as glass, quality algorithms make a significant contribution to customer satisfaction. For the inspection of products with metallic components, X-ray inspection systems are the only meaningful way to carry out a final, policy-compliant inspection. Metal detectors offer, in the case of products which are easy to test and have no intrinsic conductivity, advantages...

Digital products and services The successful operation of inspection systems is no longer solely dependent on purchasing of the right product, but also on how well the system is connected to the people and machines in its environment. Mesutronic offers a wide range of support services that increase the integration of our products. Depending on the type of electronics used, our systems can already provide information as standard via analogue signals, various bus systems or Ethernet. Information is received by either controllers, process control systems or other, higher-level machines along the...

mesuREMOTE allows our service specialists from Kirchberg im Wald to access any connected system, often avoiding time-consuming on-site deployment. Communication is secured according to current IT standards, encrypted and takes place solely after approval by the customer at all times. All of this can additionally be secured on the hardware side via a key switch. This means that any uncoordinated manipulation of systems by Mesutronic or third parties is reliably excluded. The electronic autoTEST tester allows significant reduction in manual test cycles in devices of the 07 electronics series. Signals...

In order to reduce introduction barriers and ensure smooth, long-term operation, we recommend our training programmes. We offer a wide range of solutions, from simple operator training included with commissioning to multi-day events on our premises. As with our physical products, we strive to make training as efficient and economical as possible for our customers while still in the coordination phase. The content is recommended by us and then individually adapted to your needs according to the number of participants, their educational background or previous experience. We are also happy to offer...

Customer-specific projects Special challenges may arise in particular when retrofitting inspection systems into an existing production environment. The development of solutions for these tasks is one of the core competencies of Mesutronic GmbH. The ways shown range from simple consultation on the deployment of a standard solution in an unusual way, through smaller and larger modifications, to the complete, customised customer system. We focus on the permanent, reliable and economically optimal fulfilment of your requirements. This is made possible by our company‘s competent team of employees,...

Headquarter Germany Sales and service France Mesutronic GmbH Hackenfeld 13 94259 Kirchberg im Wald Germany Mesutronic Inc. 4502 Southmark Dr. Salisbury, NC 28147 USA Mesutronic France SAS 11, rue de Mittlerweg F-68000 Colmar France You can find further international partners on our website at www.mesutronic.de/en/contact/