STEEL MILL EQUIPMENT MESSER CUTTING SYSTEMS

HEAVY-DUTY HAND CUTTING TORCH SMB 600 With spring lever for cutting oxygen (version with hand wheel valve available upon request), for cutting of slabs, ingots, billets, non-alloy and low-alloy steel castings and forgings, and for cutting of steel scrap, Cutting range see table. Fuel gases: A = Acetylene PM = Propane, methane (natural gas) Y = Methyl acetylene propadien mixtures (MAPP a.o.) Hose connections according to EN 560, G 1/2“ RH-11 for oxygen and G 3/8“ LH-9 for fuel gas Operating data see pages 6 and 7 Heavy-duty hand cutting torch without accessories Version with angled torch head...

SMB 600 / 663HEAVY-DUTY HAND CUTTING TORCHES Heavy-duty hand cutting torch without accessories Description Cutting range Art. No. Cat. No. Torch carriage Nozzle cleaners in case Hand wheel valve insert for cutting oxygen picture may differ I subject to change MESSER® Cutting Systems

SMB 600 PZFD torch length 1000 mm Execution with angled torch head and powder equipment complete incl. powder nozzle and 716.14180 * 006 quick action valve SMB 600 PZFD torch length 1500 mm Execution with angled torch head and powder equipment complete incl. powder nozzle and 716.14181 * 006 quick action valve MESSER® Cutting Systems * on request I picture may differ I subject to change SMB 600 / 663 | STEEL INDUSTRIES P.5

CUTTING NOZZLES GRICUT® 5310-A Cutting nozzle Cutting Inozzle CUTTING NOZZLES GRICUT® 5281-PMY ChUtt‘ng Art. No. thick- Cutting Heating ness Inozzle nozzle ,g The tables indicate standard values based on the use of plain steel with a carbon content of up to 0,3 % and oxygen with a minimum purity of 99.5 %. The allowable particle size in the oxygen is 30 pm maximum. The pressure stated are gauge pressure measured at the torch inlet. The consumption data indicated in m3/h apply to the standard condition as per DIN 1343. • Use only clean, undamaged nozzles. MESSER® Cutting Systems...

HEAVY-DUTY HAND CUTTING TORCHES 12,2 CUTTING NOZZLE GRICUT® CUTTING NOZZLE GRICUT® 5281-PMY MESSER® Cutting Systems $ on request I picture may differ I subject to change SMB 600 / 663 | STEEL INDUSTRIES P.7

SMB 663 with straight torch head HEAVY DUTY HAND CUTTING TORCH SMB 663 with spring lever for cutting oxygen (version with hand wheel valve available upon request), for cutting of slabs, ingots, billets, non-alloy and low-alloy steel castings and forgings, and for cutting of steel scrap. Cutting-range, see attached table. Fuel gas: A = Acetylene PM = Propane, methane (natural gas) Y = Methyl acetylene propadien mixtures (MAPP a.o.) Hose connections according to EN 560, G 1/2“ RH-11 for oxygen and G 3/8“ LH-9 for fuel gas Operating data see pages 11 and 12 SMB 663 Heavy-duty hand cutting...

SMB 600 / 663 HEAVY-DUTY HAND CUTTING TORCHES Torch head with skid Torch head with torch carriage Accessories Description Torch carriage Pressure screw Nozzle cleaners in case Hand wheel valve insert Torch head with powder nozzle Powder additional equipment Description Powder equipment complete incl. powder nozzle and quick action valve for torch length 1260 mm (SMB 663 only) Powder equipment complete incl. powder nozzle and quick action valve for torch length 1500 mm (SMB 663 only) Standard cutting nozzles are used Powder distributor P75 (see page 19) Inlet pressure 10 bar max., Container pressure...

Heavy-Duty Hand-Cutting-Torch SMB 600 completely with powder equipment Bezeichnung Art.-Nr. Kat.-Nr. SMB 663 PZFD torch length 1260 mm Execution with angled torch head and powder equipment complete incl. powder nozzle and 716.14186 * 006 quick action valve SMB 663 PZFD torch length 1260 mm Execution with straight torch head and powder equipment complete incl. powder nozzle and 716.14188 * 006 quick action valve SMB 663 PZFD torch length 1500 mm Execution with angled torch head and powder equipment complete incl. powder nozzle and 716.14187 * 006 quick...

CUTTING NOZZLES DPC-A SMB 600 / 663HEAVY-DUTY HAND CUTTING TORCHES Cutting thickness [mm] MESSER® Cutting Systems % on request I picture may differ I subject to change SMB 600 / 663 | STEEL INDUSTRIES P.11

MESSER® Cutting Systems P.12 STEEL INDUSTRIES | SMB 600 / 663 * on request I picture may differ I subject to change

Cutting values for heavy duty hand torch type SMB 663 with Fe powder unit Oxygen purity: min. 99,5 %

HEAVY-DUTY HAND CUTTING TORCHES  on request  picture may differ  subject to cha

Sleeve for powder cutting nozzle Powder hand cutting torch AC 41 With spring lever valve for simultaneous control of oxygen and powder, for cutting of heat resistant stainless steel and high-carbon steels up to 300 mm, and for Non-ferrous materials and cast iron up to 150 mm material thickness. Fuel gas: acetylene or propane, methane (natural gas), Coal gas, MAPP. Hose connections acc. to DIN 8542: G 3/8“ RH-9 fuel gas G 3/8“ LH-9, powder G 1/4“ RH-6. Operating date see page 5 Powder cutting nozzle for propane, methane (natural gas), Coal gas, MApP MESSER® Cutting Systems $ on request I picture...

1I Circle rod complete Torch carriage picture may differ I subject to change MESSER® Cutting Systems

POWDER HAND CUTTING TORCH AC 41 Material thickness [mm] The tables indicate standard values based on the use of plain steel with a carbon content of up to 0.3 % and oxygen with a minimum purity of 99.5 % and by use of GRISINT® Iron-powder. The allowable particle size in the oxygen is 30 pm maximum. The pressure stated are gauge pressure measured at the torch inlet. The consumption data indicated in m3/h apply to the standard condition as per DIN 1343. • Use only clean, undamaged nozzles. MESSER® Cutting Systems $ on request I picture may differ I subject to change

POWDER HAND CUTTING TORCH  on request  picture may differ  subject to c

Powder distributor P75 Powder distributors serve to feed iron powder or iron/aluminum powder mixtures to the powder cutting units. The powder mixtures to the powder cutting/scarfing oxygen stream, thus providing increased heat-resistant steels, cast iron and a number of non-ferrous metals can be cut. The powder distributor P 75 with “cyclonic” powder mixing system, pressure regulator, oil trap and air drying unit are used to supply our SMB 600/663 hand cutting torches with powder attachment, AC 41 powder hand cutting torches and MSP 3320/190 machine cutting torches. Connections: Inlet G 3/8“...