FiberPlast C1800 D
2Pages

FiberPlaSt C 1800 D PERMANENT ADHESION AT HIGHEST TEMPERATURES High-temperature adhesive made of polycrystalline mullite/alumina wool (PCW) up to 1750 °C (3182 °F) application temperature FiberPlast C 1800 D is a plastic deformable compound made of polycrystalline mullite/alumina wool (PCW), an inorganic binder and various additives. The adhesive is supplied premixed and ready to use. It can be used up to .750 °C application temperature. FiberPlast C 1800 D contains milled PCW-fibers and binders. Due to the unique properties of PCW at high temperature, the FiberPlast C 1800 D can be used as an excellent fiber-to-fiber-adhesive for insulation boards, as well as a surface coating. Used as a coating, it minimizes abrasion and dust formation caused by thermal and corrosive load. FiberPlast C 1800 D is particularly easy to process and will hold reliably and permanently at high temperatures. The processing starts with cleaning the surfaces. Then they should be slightly sprayed with water. After that both surfaces should be treated with 0.2 to 0.3 mm of FiberPlast C 1800 D. After compressing the surfaces to their final positions, the parts should be dried under pressure and room temperature for 24 h. The parts could also be dried in a dryer. If cracks occur during the drying or pre-sintering process, they can be glued or filled with FiberPlast C 1800 D again. YOUR BENEFITS WITH FIBERPLAST C 1800 D AT A GLANCE S Bonded or coated ceramic fibre-based parts V' For permanently safe connections V' Application temperatures up to 750 °C S Single-component adhesive ready for use and easy to process V' Also for repairs and maintenance work

simply high temperature technology Colour Max. service temperature Bulk density Wet Dry Solid content Other type of packaging upon request. We will gladly develop special high-temperature masses, such as adhesives or coatings, together with you to suit your requirements.