MXT-9680-230 STAINLESS STEEL Y STRAINER PN16 Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 1/4" to 2“ Female - Female BSP - 20°C + 200°C 16 Bars With draining cap Removable stainless steel filter Materials : Stainless steel Page 1 - 6 Information provided as an indication and subject to possible modification

MXT-9680-230 STAINLESS STEEL Y STRAINER PN16 SPECIFICATIONS : With draining cap Removable stainless steel filter Respect the flow direction indicated by the arrow Horizontal or vertical position with descendant fluid Mesh 10/10° mm ( 1000 µ ) USE : For common fluids of 2 group Min and max Temperature Ts : - 20°C to + 200°C Max Pressure PN : 16 bars nd HEAD LOSS GRAPH : Stainless steel threaded female BSP cylindric Ref. 230 from DN 1/4“ to DN 2“ Page 2 - 6 Information provided as an indication and subject to possible modification

MXT-9680-230 STAINLESS STEEL Y STRAINER PN16 MATERIALS : Body gasket Page 3 - 6 Information provided as an indication and subject to possible modification

MXT-9680-230 STAINLESS STEEL Y STRAINER PN16 SIZE ( in mm ) : Filter size : Page 4 - 6 Information provided as an indication and subject to possible modification

MXT-9680-230 STAINLESS STEEL Y STRAINER PN16 STANDARDS : DIRECTIVE 97/23/CE : CE N° 0035 Risk Category II Threaded BSP cylindric female ends according to ISO 228/1 INSTALLATION POSITIONS : Horizontal position Vertical position ( descendand fluid ) ADVICE : Our opinion and our advice are not guaranteed and MXT shall not be liable for the consequences of damages. The customer must check the right choice of the products with the real service conditions. Page 5 - 6 Information provided as an indication and subject to possible modification

MXT-9680-230 STAINLESS STEEL Y STRAINER PN16 INSTALLATION INSTRUCTIONS GENERAL GUIDELINES : Ensure that the strainers to be used are appropriate for the conditions of the installation (type of fluid,pressure and temperature). Be sure to have enough valves to be able to isolate the sections of piping as well as the appropriate equipment for maintenance and repair. Ensure that the strainers to be installed are of correct strenght to be able to support the capacity of their usage. Installation of all circuits should ensure that their function can be automatically tested on a regular basis (at least...