Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 3/8" to 4" Female BSP - 10°C + 120°C 16 Bars up to DN 2“ Removable stainless steel filter Female / Female Materials : Bronze body Page 1 - 7 Information provided as an indication and subject to possible modification

MXT-1014-202-203-210 BRONZE Y STRAINER SPECIFICATIONS : Removable stainless steel filter Female / female type Horizontal or vertical position with descendant fluid (respect the flow direction indicated by the arrow ) For 202 type, Mesh 4/10° mm ( 400 µ ) up to DN 1“ and 5/10° mm ( 500 µ ) over For 203 and 210 types, Mesh 3/10° mm ( 300 µ ) With drainer threaded female BSP with butterfly aluminium handle for 210 type Water distribution and watering Min Temperature Ts : - 10°C Max Temperature Ts :+ 120°C Max Pressure PN : 16 bars up to DN 2“ , 10 bars over HEAD LOSS GRAPH : Page 2 - 7 Information...

MXT-1014-202-203-210 BRONZE Y STRAINER RANGE : Strainer threaded female BSP cylindrical from DN 3/8“ to DN 4“ for Ref. 202 et 203 Strainer with drain threaded female BSP cylindrical from DN 1/2“ to DN 2“ for Ref. 210 Page 3 - 7 Information provided as an indication and subject to possible modification

MXT-1014-202-203-210 BRONZE Y STRAINER SIZE TYPES 202 AND 203 ( in mm ) : Filter size : Page 4 - 7 Information provided as an indication and subject to possible modification

MXT-1014-202-203-210 BRONZE Y STRAINER SIZE TYPE 210 ( in mm ) : Filter size : Page 5 - 7 Information provided as an indication and subject to possible modification

MXT-1014-202-203-210 BRONZE Y STRAINER STANDARDS : DIRECTIVE 97/23/CE : Products excluded from directive ( Article 1, § 3.2 ) French water agreement A.C.S. N° 09 ACC LY 157 English water agreement WRAS Threaded female BSP cylindrical ends according to ISO 228/1 INSTALLATION POSITIONS : Vertical position ( descendand fluid ) Horizontal position ADVICE : Our opinion and our advice are not guaranteed and MXT shall not be liable for the consequences of damages. The customer must check the right choice of the products with the real service conditions. Page 6 - 7 Information provided as an indication...

INSTALLATION INSTRUCTIONS GENERAL GUIDELINES : Ensure that the strainers to be used are appropriate for the conditions of the installation (type of fluid,pressure and temperature). Be sure to have enough valves to be able to isolate the sections of piping as well as the appropriate equipment for maintenance and repair. Ensure that the strainers to be installed are of correct strenght to be able to support the capacity of their usage. Installation of all circuits should ensure that their function can be automatically tested on a regular basis (at least two times a year). INSTALLATION INSTRUCTIONS...