GateValve F4 non rising stem bronze.seat

1 / 1 PageView full catalog

GateValve F4 non rising stem bronze.seat

Product catalog summary

Technical Features

Design: Gate Valve - NRS - with Gland - Short Type - F4 - with Indicator
Face to Face: EN 558 Series 14 (DIN 3202 F4)
Flange Dimension: DIN Flanges acc. to EN 1092-2/B (DIN 2501)
Pressure Rating: PN 4 - PN 16
Temperature Range: -10 ºC to +120 ºC
Options: Drain plug, double threaded stem, chainwheel, locking device
Flange Options: Special flange drilling acc. to ANSI or JIS, flat faced flanges

Pressure and Temperature Range

DN 40 - DN 150: PN 16, 16 bar at 120ºC, Hydraulic test pressure: 24 bar for casing, 16 bar for closure
DN 175 - DN 300: PN 10, 10 bar at 120ºC, Hydraulic test pressure: 15 bar for casing, 10 bar for closure
DN 350 - DN 500: PN 6, 6 bar at 120ºC, Hydraulic test pressure: 9 bar for casing, 6 bar for closure
DN 600 - DN 700: PN 4, 4 bar at 120ºC, Hydraulic test pressure: 6 bar for casing, 4 bar for closure

Material Specifications

Internal Components: Bronze (RG5), Stainless Steel (X20CR13, AISI 316)
Body, Bonnet: EN-GJS400-18-LT (GGG40.3)
Wedge: EN-GJS400-18-LT (GGG40.3), CuSn5Zn5Pb5-C (RG5)
Seats: CuSn5Zn5Pb5-C (RG5), AISI 304 (1.4301), AISI 316 (1.4401)
Stem: CuZn39Pb3 (Ms58), X20CR13 (1.4021), AISI 316 (1.4401)
Stud bolts, nuts: Steel
Bonnet gasket: Asbestos-free
Gland packing: PTFE
Hand wheel: EN-GJL250 (GG25)
Indicator: CuSn5Zn5Pb5-C (RG5)

Dimensions

DN (mm)	ØD	L (mm)	H (mm)	ØR (mm)	Weight (kg)
40	150	150	140	265	11
50	165	165	150	270	13
65	185	185	170	295	17
80	200	200	180	325	20
100	220	220	190	365	28
125	250	250	200	440	40
150	285	285	210	490	50
175	315	315	220	560	65
200	340	340	230	610	85
250	395	405	250	730	135
300	445	460	270	870	180
350	505	520	290	950	225
400	565	580	310	1045	295
450	615	640	330	1100	350
500	670	715	350	1250	530
600	780	840	390	1475	640
700	895	910	430	1650	820

Catalog excerpts

GateValve F4 non rising stem bronze.seat-1

MXT-10317-N-B GATE VALVE - NRS - WITH GLAND SHORT TYPE - F4 - WITH INDICATOR Technical Features Design Face to Face Flange Dimension Pressure Rating Temperature Range Options : DIN EN 1171 (DIN 3352 T2) - with indicator : EN 558 Series 14 (DIN 3202 F4) : DIN Flanges acc. to EN 1092-2/B (DIN 2501) : PN 4 - PN 16 : -10 ºC + 120 ºC : Drain plug, double threaded stem, chainwheel, locking device : Special flange drilling acc. to ANSI or JIS, flat faced flanges Flange Options PRESSURE AND TEMPERATURE RANGE Bore Pressure Temperature range Hydraulic test pressure in bar for Bore PN leak – tightness of (Nominal Casing (Cast) Closure Pressure) 24 16 PN 16 15 DN 40 - DN 150 10 Pressure Temperature range Hydraulic test pressure in bar for leak – tightness of Casing (Cast) MATERIAL SPECIFICATIONS INTERNAL COMPONENTS Body, bonnet Stud bolts, nuts Bonnet gasket Asbestos - free Gland packing Hand wheel Bonnet gasket PTFE Gland packing EN-GJL250 (GG25) Hand wheel CuSn5Zn5Pb5-C (RG5) Indicator CuZn39Pb3 (Ms58) Steel Steel Asbestos - free X20CR13 (1.4021) Steel Steel Asbestos - free MERX TRADE B.V. | WWW.MERXTRADE.COM [email protected] |

Open the catalog to page 1

GateValve F4 non rising stem bronze.seat

GateValve F4 non rising stem bronze.seat

Catalog excerpts

All MerxTrade BV catalogs and technical brochures