Gate-Valve-Forged.Steel-Thread-BSP - MXT-1753114
6Pages

FORGED GATE VALVE 800 LBS ( 112-113-114-152-153 ) Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 3/8" to 2“ Female - Female BSP or NPT , Socket Welding -30°C in S.S. and –20°C in carbon steel + 440°C 138 Bars Rising stem non rotating Bolted bonnet and gland pack Reduced bore Materials : Carbon steel or stainless steel Page 1 - 6 Information provided as an indication and subject to possible modification

FORGED GATE VALVE 800 LBS ( 112-113-114-152-153 ) SPECIFICATIONS : Reduced bore Rising stem non rotating Bolted bonnet and gland pack Forged Carbon steel or stainless steel ½ stellite ( Trim 8 ) for carbon steel valves Trim 10 standard SS 316 for stainless steel types 800 lbs Petroleum industry, steam, high pressure Min and max Temperature Ts : - 30°C to + 440°C for SS types Ref.152/153 Min and max Temperature Ts : - 20°C to + 440°C for carbon steel types Ref. 112/113/114 Max Pressure PN : 138 bars ( see graph ) PRESSURE / TEMPERATURE GRAPH : FOR CARBON STEEL TYPES ( Ref. 112-113-114 ) FOR...

FORGED GATE VALVE 800 LBS ( 112-113-114-152-153 ) RANGE : Carbon steel Socket Welding ends Ref. 112 DN 10 to DN 50 Carbon steel NPT threaded Ref.113 DN 3/8“ to DN 2“ Carbon steel BSP cylindric threaded Ref.114 DN 3/8“ to DN 2“ Stainless steel Socket Welding ends Ref.152 DN 10 to DN 50 Stainless steel NPT threaded Ref.153 DN 3/8“ to DN 2“ Wheel nut Name plate Handwheel Yoke nut Gland nut Gland flange Gland stud Gland Packing Bolts Stem Bonnet Gasket Seat Wedge Body Carbon steel Aluminium Carbon steel ASTM A582 type 416 ASTM A194 2H ASTM A105 SS 410 ASTM A276 type 410 Graphite ASTM A193 B7...

FORGED GATE VALVE 800 LBS ( 112-113-114-152-153 ) SIZE ( in mm ) : Page 4 - 6 Information provided as an indication and subject to possible modification

FORGED GATE VALVE 800 LBS ( 112-113-114-152-153 ) STANDARDS : DIRECTIVE 97/23/CE : CE N° 0036 Risk category III module H Approval certificate Russian Federation GOST-R Valves approved by the main oil industries ( certificates on request ) ATEX Group II Category 2 G/2D Zone 1 & 21 Zone 2 &22 ( optional marking ) Threaded female BSP cylindrical ends according to ISO 7-1 Rp Threaded female NPT ends according to ANSI B1.20.1 ADVICE : Our opinion and our advice are not guaranteed and MXT shall not be liable for the consequences of damages. The customer must check the right choice of the products...

FORGED GATE VALVE 800 LBS ( 112-113-114-152-153 ) INSTALLATION INSTRUCTIONS GENERAL GUIDELINES : Ensure that the valves to be used are appropriate for the conditions of the installation (type of fluid,pressure and temperature). Be sure to have enough valves to be able to isolate the sections of piping as well as the appropriate equipment for maintenance and repair. Ensure that the valves to be installed are of correct strenght to be able to support the capacity of their usage. Installation of all circuits should ensure that their function can be automatically tested on a regular basis (at...