HP15FHP80

HP15FHP80

HP15FHP80

Product catalog summary
Introduction
Mersen's 1500VDC HelioProtection fuse holders are designed for utility-scale photovoltaic applications, offering enhanced safety and versatility. The HP15FHP80 series is IP20 rated for finger safety and features a rotating fuse carrier.

Configurations
The series includes two configurations: HP15FHP80W for wire-to-wire connections and HP15FHP80B for wire-to-bus bar connections. Both configurations support PV-rated wiring and bus bars.

Features and Benefits
  • UL 94 V-0 rated polymer for superior flammability resistance.
  • Compatible with PV-rated copper wire, supporting #1-14 AWG CU/AL.
  • 35 mm DIN Rail Mounting and Lock Out/Tag Out feature.
  • Front loading of fuses for easy installation and removal.
  • Ergonomic fuse door handle and molded standoffs for better air circulation.

Applications
  • Photovoltaic applications including PV string/array level protection.
  • Combiner box applications, in-line PV module protection, inverters, and battery charge controllers.

Approvals and Standards
  • HP15FHP80W: UL 4248-19 Listed, IEC 60269-2, UKCA.
  • HP15FHP80B: UL Recognized Component, evaluated to UL 4248-19, IEC 60269-2, UKCA.

Technical Data
  • Maximum Voltage: 1500VDC
  • Maximum Amperage: 80A
  • Short-Circuit Current Rating: 50kA DC
  • Operating Temperature: -40 to +125°C
  • Required Terminal Torque: 22 in-lbs/2.5N-m
See more

Catalog excerpts

HP15FHP80-1

HelioProtection® Fuse Holders for PV Applications F U S E B LO C K S & H O L D E R S UP TO 80A FOR USE IN HIGHER AMPERAGE PV SYSTEMS Mersen’s 1500VDC HelioProtection fuse holders for 20x65mm PV fuses introduce the next level of safety for higher amperage utilityscale photovoltaic applications. The HP15FHP80 fuse holders are finger safe (IP20 ingress protection rated) and feature a rotating fuse carrier like the Mersen UltraSafe® fuse holders. The HP15FHP80 series offers two configurations to fulfill global market requirements. One configuration offers input and output terminals that accept standard PV rated wiring and comb bus bars, providing added versatility for end-use installations. The second accepts wire and bus bar terminations. The body features a high performance UL 94 V-0 rated polymer material, providing superior flammability rating, with exceptional durability and dielectric withstand properties. • Terminations • HP15FHP80W: Wire/Wire • HP15FHP80B: Wire/Bus Bar • Clamping: • HP15FHP80W: Screw clamp • HP15FHP80B: Patented Bus Bar clamp • UL 94 V-0 rated • Use with PV-rated copper wire • Wire range: #1-14 AWG CU/AL • IP20 rated (finger safe) • 35 mm DIN Rail Mounting • Lock Out/Tag Out feature • Accepts Mersen HP15P 20x65mm PV fuses • Front loading of the fuse allows for ease of installation and removal of fuse • Fuse stabilization feature allows inverted mounting • Fuse door handle designed with ergonomic grip • Molded standoffs allow increased air circulation in panel applications • All photovoltaic applications • PV string/array level protection • Combiner box applications • In-line PV module protection • Inverters • Battery charge controllers • 1500VDC Combiner Boxes Short-Circuit Current Rating (SCCR) Operating Temperature Required terminal torque Technical Data Overview HP15FHP80B: • UL Recognized Component, evaluated to UL 4248-19 • IEC 60269-2 • UKCA © 2023 Mersen. All rights reserved. Mersen reserves the right to change, update, or correct, without notice, any

 Open the catalog to page 1
HP15FHP80-2

HelioProtection® Fuse Holders for PV Applications © 2023 Mersen. All rights reserved. Mersen reserves the right to change, update, or correct, without notice, any information contained in this datasheet.

 Open the catalog to page 2

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.