Supporting devices for wire feed systems
5Pages

Supporting devices for wire feed systems Supporting devices for wire feed systems Swivelling Support Arm/Boom A-2 Column for Swivelling Arm/Boom A-4 Technical details subject to change

Supporting devices for wire feed systems Swivelling Support Arm/BoomLarge Operating radius and simplicity of use for Designed for power sources with a total weight of up to 60 kg (e.g HighPULSE 280/350K), or wire feeders for welding systems D/DW to be suspended from the machine carriage Designed to be manoeverable through tension on the welding torch cable Optimal workplace organisation and safety because the extension, interconnecting cables etc. are suspended Optimal positioning of the power source/wire feeder directly in the operational area Reduced hazard of crushing the interconnecting...

End clamp part no. 019.0.0700 The end clamp with attached strap is suitable for supporting the interconnecting cable. Cable carriage part no. 019.0.1600 The cable carriage with ball bearing rollers is suitable for supporting the interconnecting cable. Machine carriage part no. 019.0.1200 The machine carriage supports the welding power source or wire feeder and runs on four ball bearing rollers. End stop part no. 019.0.0600 The end stop is manufactured from zinc plated steel, and is used to limit the carriage travel in the Boom rails. Technical details subject to change

Supporting devices for wire feed systems Column for Swivelling Arm/Boom Column for Swivelling Support Arm/Boom part no. 151.584 This column is designed for a free standing installation of our swivelling support arms/booms type SA 31,41, 51 & 61. A machine platform as option is available, and is mounted at the bottom of the column to support the welding power source.The support arm/boom is not included in the scope of supply and must be ordered separately. Column for Swivelling Support Arm/Boom incl machine platform (without support arm/boom) part no. 150.661 Column for Swivelling Support...

Supporting devices for wire feed systems Balancer Type G3 The Balancer G3 allows a comfortable and uncluttered operation of the welding torch packet through supporting this from above, into the working area. The wire feeder is mounted on the balancer making horizontal and vertical rotation of the wire feeder and boom possible. Mechanical forces and resulting damage to the Euro central torch connector are therefore eliminated. Through adjustable spring pressure, the angular positioning of the wire feeder and boom is maintained, with only light pressure necessary to return it to its original...