BuiltSAFE MFCC-8558 SBC NXP QorIQ™ T2080 Conduction-cooled Single Board Computer (SBC) XMC Module • Designed for DAL-C (DO-178C/DO-254) certification • NXP QorIQ™ T2080 processor • Low-SWaP and power options with I/O avionics interfaces or high performance video graphics • 4x PCIe Gen2 interfaces on XMC (full mesh support) • 1x DAL-C Fast Ethernet interface on XMC • Maintenance/mission mode with specific hardware logic • Safety optimized board management controller • Backward compatibility with MFCC-8557 Mercury’s MFCC-8558 BuiltSAFE board is a DAL-C safety certifiable XMC 2.0 Single Board Computer (SBC) engineered for the most stringent aerospace and defense applications that may require certification to DO-178C/DO-254. The MFCC 8558 can be delivered with all documentation, certification evidence and supporting artifacts required to prove compliance for avionics certification. Leveraging the MFCC-8558 ensures a smooth development process supported by Mercury’s safety engineering team and their deep domain expertise. The MFCC-8558 BuiltSAFE SBC has been engineered with DAL safety certification in mind from the top down, systematically applying DO-178C/DO-254 best design practices. The MFCC-8558 has a comprehensive set of Power-On, Continuous and Initiated Built-In-Tests and hardware components that physically disconnect maintenance interfaces during missions for built in reliability. Mercury Systems is a leading commercial provider of secure sensor and mission processing subsystems. Optimized for customer and mission success, Mercury’s solutions power a wide variety of critical defense and intelligence programs. Freescale QorIQ™ T2080 NAND NOR NVRAM Mercury’s BuiltSAFE™ products bring the highest level of flightsafety assurance to aerospace and defense applications. Our proven, reusable Design Assurance Level (DAL) certified artifacts for mission computing, avionics, networking and datalink comms processing save time and cost while decreasing risk. 1x USB 2.0 OTG 1x USB HOST 1x SATA II 2x UARTs 2x UARTs Pre-integration The MFCC-8558 BuiltSAFE SBC is engineered for seamless integration with complementary building blocks with XMC 2.0 compatible mezzanine sites. Pre-integrated with BuiltSAFE 3U OpenVPX modules such as Mercury’s VGP-2870 video and graphic processor card or AVIO-2353 avionics I/O card, the MFCC-8558 becomes a powerful DAL-C (DO-178C/ DO-254) certifiable subsystem that is packaged in a single 3U OpenVPX slot. This approach is ideal for computation intensive video/graphics or I/O intense avionic applications. ACQUIRE DIGITIZE ACQUIRE PROCESS DIGITIZE ACQUIRE PROCESS DIGITIZE STORAGE ACQUIRE PROCESS DIGITIZE STORAGE EXPLOIT ACQUIRE PROCESS DIGIT

BuiltSAFE for Avionics Mercury's expertise and experience in safety certifiable solutions has been built on successful execution of dozens of programs over three decades. This domain knowledge is the foundation of our BuiltSAFE portfolio of open architecture modules, systems and software for avionics, communications, video servers, and mission computing. Technical Specifications Compliance XMC 2.0 (VITA-61), XMC PCIe (VITA 42.3) Certifiable up to DAL-C (DO-178C/DO-254) - Higher upon request Certifiable board support package: VxWorks®653 (partitioned) Power Consumption minimum typical maximum...

Related Hardware Products AVIO-2353 3U OpenVPX avionics I/O board 3U OpenVPX video I/O and graphic processor 3U OpenVPX carrier board for MFCC-8557/8 Rear Transition Module for CB3P-6357A0 + MFCC-8557/8 integration Forced air-cooled 4-slot payload, 3U OpenVPX sealed conduction-cooled enclosure (0.8”, 0.85”, 1” pitch, 250 Watts) with MIL connectors 3U OpenVPX, low-SWaP, rugged, modular, pre-qualified subsystems Less space for more functions Mission Computer featuring stacked XMCs for low-SWaP Front Panel www.mrcy.com Mercury Systems, Innovation That Matters, and BuiltSAFE are trademarks of Mercury...