Echotek Series SCFE-V6-4QSFP-OVPX 16 CH (4 X QSFP) Fiber OpenVPX FPGA Module
2Pages

16 CH (4 X QSFP) Fiber OpenVPX FPGA Module Four QSFP cages and connectors per OpenVPX™ slot via two IOM-QSFP-FMC Optical Interface FMCs Full duplex data rate of 3.125 to 5 Gbps SFPDP protocol support, subset components provided for VITA-49 Digital IF development Modular approach allows for the exchange of fiber media without baseboard removal FMC HPC connection to Virtex -6 FPGAs (SX315/SX475/LX240T) on Serial RapidlO®-enabled SCFE-V6-0VPX baseboard COMPUTER SYSTEMS™ The SCFE-4QSFP-V6-0VPX Module is ideal for deployed defense and industrial applications where digitized sensor I/O or data packets need routing via multi- channel high-speed fiber (or short-reach copper) to and from FPGA processors. Data rates of 3.125 Gbps to 5 Gbps per serial fiber lane are supported with up to 16 lanes available per OpenVPX slot. full-duplex fiber channels and three large Xilinx® Virtex- 6 FPGAs (SX315T SX475T or LX240T) into a single OpenVPX board slot. This is made possible via the integration of two IOM-QSFP-FMC Optical Interface FPGA Mezzanine Cards (FMCs), which provide for a total of four QSFP connections onto Mercury's flagship SCFE-V6-0VPX Vita 65 OpenVPX baseboard (see Figure 1. SCFE-V6-4QSFP-OVPX provides 16 fiber channels via four QSFP connectors, three Virtex-6 FPGAs and a QorlQ PowerPC

Specications Size Two single-wide IOM-QSFP-FMC modules extend through the front panel of the SCFE-V6-OVPX carrier (1.0” pitch) Environmental 0 C to +55 C Contact factory for rugged versions Power Supply Requirements* 11.7A @ 12V max 3.0A @ 5V max 3.7A @ 3.3V max *160W assumes max load of 30W per each of three user programmable FPGAs and two IOM-QSFP-FMC modules at max draw Fiber Channels 16 with two IOM-QSFP-FMC modules on SCFE-V6-OVPX carrier FPGA Type V6 SX315T, SX475T or LX240T available on SCFE-V6-OVPX OpenVPX™ FMC carrier. Refer to SCFE-V6-OVPX datasheet for additional specications....