Milli-Q® Integral Water Purification Systems Integrated pure and ultrapure water at your fingertips Merck Millipore is a division of |MERCK

Integrated pure and ultrapure water at your fingertips Your pure and ultrapure water needs Our solution: the Milli-Q® Integral system Pure and ultrapure water directly from tap water — in a single unit A comprehensive and optimized sequence of water purification and monitoring technologies allows the system to produce both pure (Type 2) and ultrapure water from tap — in a single unit. Patented Elix® electrodionization technology and ergonomic POD water dispensers provide consistent water quality and optimized delivery. Ultrapure water quality adaptable to a variety of needs. A range of Application...

Milli-Q® Integral water purification pathway The Milli-Q® Integral system uses regular tap water as feed, and produces pure and ultrapure water delivered by independent POD dispensers. 11. RO reject solenoid valve 12. Permeate conductivity cell 22. E-POD® dispenser and final polisher Inlet solenoid valve Progard® pretreatment pack 14. Elix® electrodeionization module Pressure regulator 15. Elix® resistivity cell 25. Milli-Q® product water resistivity cell Booster pump Feed water conductivity cell 27. Milli-Q® water TOC monitor RO cartridge with sanitization port 19. PE Reservoir, ASM and Vent...

Pure and ultrapure water from tap — in a single unit The Milli-Q® Integral system is a compact solution that combines the production of Type 2 (pure) water and Type 1 (ultrapure) water in a single unit — eliminating the need for a pretreatment stage upstream of the ultrapure water system. Dual POD (Point-of-Delivery) concept The Milli-Q® Integral system’s POD dispensers are designed to save space and increase convenience for users. Users can customize their lab installations by placing Q-POD® ultrapure water dispensers and E-POD® pure water dispensers exactly where they’re needed. For additional...

Ultrapure water quality adaptable to a variety of needs Additional purification steps provide ultrapure water with 18.2 MΩ.cm @ 25 °C resistivity that can be “fine-tuned” even further to remove specific types of contaminants. With the appropriate Application Pak point-of-use polisher in place, the Milli-Q® Integral system will provide water suitable for HPLC, LC-MS, MALDI-ToF-MS, IC, ICP, AA and most of the analytical techniques commonly used in the laboratory. Application Paks can be easily connected to POD dispensers, letting you match your water quality to your specific research and applications....

Easy, convenient pure and ultrapure water delivery Easy operation allows researchers to save valuable time. Pure and ultrapure water delivery with E-POD® and Q-POD® dispensers is simple and intuitive, matching your requirements without compromising quality. The Milli-Q® Integral system makes it easy for you to adapt your water purification system to your different laboratory applications. You can be sure to have the daily volume of water you require at the flow rate you need — up to 360 L pure or ultrapure water per day, at up to two liters per minute when needed. Q-POD® and E-POD® units can...

Advanced water quality monitoring Resistivity monitoring for high-precision measurement of ionic concentration The proper measurement of resistivity is key to making sure that ionic contamination of high purity water remains at sub-ppb level. Milli-Q® Integral system high-precision resistivity meters have specific features to ensure that the value displayed on the system screen is meaningful. • Patented cell design with coaxial electrodes to warrant cell constant stability. • Flow-through design to make sure that the measurement is representative of the actual ionic concentration in the water....

Optimized lab space Today’s laboratories are used for multiple activities, with bench space for researchers’ critical experiments often at a premium. To make the best use of the lab space you have available, Merck Millipore designed the Milli-Q® Integral water purification system as two separate components: • The compact Milli-Q® Integral system water purification unit can be conveniently located under the bench — or high on a wall. • The system’s E-POD® and Q-POD® water delivery units also take up very little bench space, or if you prefer, they can also be installed on a wall. Intuitive operation...

Smooth and easy communication Milli-Q® Integral system users benefit from easy, efficient access to the information they need: • The large backlit screen on the water production unit shows simplified and detailed information (choose from 8 languages). • Alerts and alarms (which can be enhanced by a buzzer) are visible on the system’s main screen, with complete information on actions required accessible instantly. • Sensors regularly monitor system operation to ensure it operates with specifications. For instance, if ionic contamination of feed water exceeds specifications, causing high conductivity,...

Data tracking that meets your requirements Millitrack® Basic software Millitrack® Basic software, when activated, provides enhanced data management control, remote access capabilities to the system dashboard, and long-term electronic archiving for your Milli-Q® Integral system. Millitrack® Compliance innovative e-solution meets FDA 21 CFR Part 11 requirements Now Milli-Q® Integral system users in pharmaceutical, biotech and contract labs that follow GxP regulations can benefit from Millitrack® Compliance. This fully-embedded e-solution provides access to key water system information through a...

Compliance with the highest Quality Assurance demands Certificate of Conformity – The product has been assembled and tested according to Merck Millipore’s stringent Quality Assurance procedures. Certificates of Calibration – Included for the built-in resistivity meters and TOC monitor as well as other built-in sensors. Declaration of Conformity – European Union EC Directive for safety and electromagnetic compatibility Certificate of Quality – Consumables are delivered with a Certificate of Quality ensuring that they will deliver the water quality and quantity expected. Application Pak validation...