video corpo

Network - GENERAL CATALOGUE 2014
80Pages

{{requestButtons}}

Catalog excerpts

Network - GENERAL CATALOGUE 2014 - 2

MEp group The MEP Group today represents the latest stage in the evolution of the know-how, technology and values that MEP has developed over a period of 50 years. The MEP Group is present on all major markets and is a leader in those of most importance. The group has production plants in Italy, Canada, the USA and China which produce around 12,000 machines a year. MEP products are sold in over 50 nations around the world thanks to close collaboration with highly qualified local distributors and/or directly controlled subsidiaries (China and Brazil). The MEP Group’s extensive product range...

Open the catalog to page 2
Network - GENERAL CATALOGUE 2014 - 3

mep around the world MEP (SUZHOU) CO. LTD (PR. CHINA) MEP (SUZHOU) CO. LTD Suzhou P.R. China

Open the catalog to page 3
Network - GENERAL CATALOGUE 2014 - 4

WORKSHOP Enzo Magnani 1959 The TV 300 was MEP’s first series-made abrasive disc cutting machine.

Open the catalog to page 4
Network - GENERAL CATALOGUE 2014 - 5

MADE WITH COMMITMENT AND PASSION The MEP Group has firm roots in one of the many entrepreneurial families that thrive in a region rich in hard-working people, history and art. It all began in a small workshop in the historical centre of Pergola, a town in the province of Pesaro-Urbino, in the Marche region of Italy. Enzo Magnani began his career as a mechanic, exploiting the skills he had acquired with British and American forces based in Italy during the Second World War. The ingenuity he showed in his small workshop led to the creation of the first sawing machine, which proved so...

Open the catalog to page 5
Network - GENERAL CATALOGUE 2014 - 6

cutting mode AUTOMATIC cutting mode SEMI-AUTOMATIC cutting mode SEMI-AUTOMATIC DYNAMIC cutting mode MANUAL ELECTROHYDRAULIC ELECTROPNEUMATIC

Open the catalog to page 6
Network - GENERAL CATALOGUE 2014 - 7

BANDSAWING MACHINES VERTICAL SAWING MACHINES PIVOT SAWING MACHINES FOR METALS PIVOT SAWING MACHINES MEASURING SYSTEM TECHNICAL FEATURES

Open the catalog to page 7
Network - GENERAL CATALOGUE 2014 - 8

The PH 211-1, manual band sawing machines for cuts from 0° to 60° on the left are also supplied in a version with HB device to make single cuts without operators, still keeping the manual cutting cycle available ( the HB device is available only in the three-phase version). HB CUTTING CYCLE: - After positioning the bar and closing the vice, the cutting phase is started, using the weight of the saw frame controlled by a hydraulic circuit to adjust the downfeed speed; after the cut the band stops, the frame is manually lifted in order to reposition the bar to cut untill the position needed by...

Open the catalog to page 8
Network - GENERAL CATALOGUE 2014 - 9

The PH 261-1, manual band sawing machines for cuts from 0° to 60° on the left are also supplied in a version with HB device to make single cuts without operators, still keeping the manual cutting cycle available. HB CUTTING CYCLE: - After positioning the bar and closing the vice, the cutting phase is started, using the weight of the saw frame controlled by a hydraulic circuit to adjust the downfeed speed; after the cut the band stops, the frame is manually lifted in order to reposition the bar to cut untill the position needed by the operator , at this point the head frame is locked by the...

Open the catalog to page 9
Network - GENERAL CATALOGUE 2014 - 10

SHARK 281, manual band sawing machine to cut from 0° to 60° left. The vice on the pneumatic versions (MA) opens and closes by means of a manually operated valve (or by means of a footpedal which is instead optional). A FEW FEATURES: - Electric panel (wiring totally identifiable, standby, loose-key safety switch, main switch, pole change switch, emergency stop, motor magnetothermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V). - IP55 control handle. - Vice with fast clamping device. - Hydraulic transducer to visualize band...

Open the catalog to page 10
Network - GENERAL CATALOGUE 2014 - 11

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight controlled by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/closed by a manually-controlled valve (optional with pedal control). A FEW FEATURES: See SHARK 281.

Open the catalog to page 11
Network - GENERAL CATALOGUE 2014 - 12

SHARK 281 SXI evo, semi-automatic, electrohydraulic band sawing machine for cutting from 0° to 60° left. - Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: starting the cycle by means of the relative push-button, the following steps are carried out: - the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. - Standard machine with operation in semiautomatic cycle only, that can be ordered with additional...

Open the catalog to page 12
Network - GENERAL CATALOGUE 2014 - 13

- Double band rotation speed (36/72 m/min) with possibility of ordering the sawing machine with electronic inverter for the continuous adjustment of the band speed (from 15 to 100 m/min). - The limits of the head stroke are programmed through the console, depending on the dimensions of the bars to be cut. - Manually-operated blade tensioning through electronic transducer, with displaying. - Steel base with removable coolant tank. - Electric pump for band lubrication and cooling. - Preset to be equipped with the spray mist system (OPTIONAL), other than with the standarddelivered traditional...

Open the catalog to page 13
Network - GENERAL CATALOGUE 2014 - 14

Shark 281 NC 5.0, electrohydraulic automatic band sawing machine which can operate also in semi-automatic, semi-automatic/dynamic and manual mode to cut from 0° to 60° left. - CNC machine with a new controller : MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products. A FEW FEATURES: - 7” touch screen display operator interface and push buttons for all functions of the sawing machine. It is simple and intuitive , it guarantees a reliable use and it controls all cutting parameters in real time.

Open the catalog to page 14
Network - GENERAL CATALOGUE 2014 - 15

- Coolant tank inside the steel base with two electric pumps so as to lubro-refrigerate band. The drawer to collect chips can be replaced with a motorized chip evacuator (see optionals). - Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standarddelivered traditional lubrication with emulsible oil. - Wire chip brush for band cleaning. - Machine arranged for handling with movement equipment. - Bi-metal band for solids and sections. - Service keys and instructions manual for maintenance and spare parts list. - Console with all centralized controls, installed on...

Open the catalog to page 15

All MEP catalogs and technical brochures

Archived catalogs

  1. SMV 3000

    1 Pages

  2. SMV 3000 PRO

    1 Pages

  3. CB 6001

    2 Pages

  4. Industry

    36 Pages

  5. Catalogue MEP

    88 Pages