*mydirectindustry

Catalogs
MEP
CB 6001

CB 6001

1 / 2 PagesView full catalog

CB 6001

Product catalog summary

Specifications:

The CB 6001 is a chute loading magazine designed for MEP sawing machines, specifically models TIGER 372 CNC LR 4.0 and TIGER 402 CNC HR 4.0.
Maximum load capacity is 2400 kg, accommodating up to 8 bars of round solid with a diameter of 80 mm.
The unit features an 80-cm adjustable bed for loading round, square, and rectangular solids or sections.
Requires a 6 BAR air supply and is powered by the sawing machine's controller.

Procedures:

Fix the unit to the floor to prevent misalignment due to its maximum load capacity.
When a restpiece remains, the magazine automatically pushes it out and positions a new bar for cutting.

Features:

Allows sequential cutting of bars without operator presence for extended periods.
Constructed with a sturdy tubular steel structure, partially demountable for transport.
Transmission mechanisms and bar feeding system are made of steel.
Can be ordered with the sawing machine or separately if the machine is equipped to mount the CB 6001 with a vice to reduce restpieces.

Recommendations:

Equip the sawing machine with a motorized chip evacuator to handle chips generated from cutting materials with significant wall thickness.

Catalog excerpts

CB6001 CB 6001 BAR CHUTE LOADING MAGAZINE 6000 MM FOR MEP SAWING MACHINE MODEL TIGER 372 CNC LR 4.0 and TIGER 402 CNC HR 4.0. CB 6001 - Since this unit has a maximum load of 2400 kg (8 bars of round solid with a diameter of 80 mm) we recommend to fix it to the floor so as to avoid even minimum unalignments.

Open the catalog to page 1

A FEW FEATURES: - This accessory allows you to cut in sequence all the bars which are positioned onto the chute of the loading magazine and consequently the machine can work, even for a long time, without the presence of the operator. - The CB 6001 has a 80-cm bed where the inclination can be regulated. It can be loaded till it is full with round, square and rectangular solids or sections up to the maximum dimensions indicated in the feature table. - When a restpiece which cannot be cut remains in the machine, the loading magazine sends forward a new bar pushing out the restpiece. The new bar...

Open the catalog to page 2

All MEP catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list