CATALOGO-NETWORK_2020-EN_SEGATRICI-MEP.pdf
70Pages

MEp group The MEP Group today represents the latest stage in the evolution of the know-how, technology and values that MEP has developed over a period of 50 years. The MEP Group is present on all major markets and is a leader in those of most importance. The group has production plants in Italy, Canada, the USA and China which produce around 12,000 machines a year. MEP products are sold in over 50 nations around the world thanks to close collaboration with highly qualified local distributors and/or directly controlled subsidiaries (China and Brazil). The MEP Group’s extensive product range...

mep around the world MEP (SUZHOU) CO. LTD (PR. CHINA) MEP (SUZHOU) CO. LTD Suzhou P.R. China

WORKSHOP Enzo Magnani 1959 The TV 300 was MEP’s first series-made abrasive disc cutting machine.

MADE WITH COMMITMENT AND PASSION The MEP Group has firm roots in one of the many entrepreneurial families that thrive in a region rich in hard-working people, history and art. It all began in a small workshop in the historical centre of Pergola, a town in the province of Pesaro-Urbino, in the Marche region of Italy. Enzo Magnani began his career as a mechanic, exploiting the skills he had acquired with British and American forces based in Italy during the Second World War. The ingenuity he showed in his small workshop led to the creation of the first sawing machine, which proved so...

cutting mode AUTOMATIC cutting mode SEMI-AUTOMATIC cutting mode SEMI-AUTOMATIC DYNAMIC CCS cutting mode CCS cutting mode MANUAL ELECTROHYDRAULIC ELECTROPNEUMATIC

index bandsawing machines vertical sawing machines for metals SHARK 281 SHARK 281CCS/MA SHARK 281 SXI evo SHARK 281 NC 5.0 SHARK 282 SHARK 282 CCS/MA SHARK 282 SXI evo SHARK 331-1 NC 5.0 spider SHARK 332-1 CCS SHARK 332-1 SXI evo SHARK 332-1 NC 5.0 SHARK 382-1 SXI evo SHARK 452-1 SXI evo SHARK 230-1 NC HS 5.0 TIGER 352/MA TIGER 352 SX evo TIGER 352 NC 5.0 TIGER 372 SX evo pivot sawing machines for metals COBRA 352/MA COBRA 352 SX evo COBRA 352 NC 5.0 OPTIONALs technical features pivot sawing machines for aluminium FALCON 251 FALCON 302 FALCON 352/MA

operators, still keeping the manual cutting cycle available ( the HB device is available only in the three-phase version). HB CUTTING CYCLE: - After positioning the bar and closing the vice, the cutting phase is started, using the weight of the saw frame controlled by a hydraulic circuit to adjust the downfeed speed; after the cut the band stops, the frame is manually lifted in order to reposition the bar to cut untill the position needed by the operator, at this point the head frame is locked by the manually-controlled hydraulic valve. A FEW FEATURES: - Sturdy structures in cast iron in...

The PH 261-1, manual band sawing machines for cuts from 0° to +60°, are also supplied in a version with HB device to make single cuts without operators, still keeping the manual cutting cycle available. HB CUTTING CYCLE: - After positioning the bar and closing the vice, the cutting phase is started, using the weight of the saw frame controlled by a hydraulic circuit to adjust the downfeed speed; after the cut the band stops, the frame is manually lifted in order to reposition the bar to cut untill the position needed by the operator, at this point the head frame is locked by the...

The PH 262, manual band sawing machines for cuts from -45° to +60° is also supplied in a version with Hydraulic Brake device (HB) to make single cuts without operator but keeping the manual cutting cycle available ( the HB device is available only in the three-phase version). A FEW FEATURES - Sturdy structures in cast iron in order to tension the band at 900 kg. - Wide working surface granting a perfect working condition and safety; turning table integral with saw head to cut at any angles without damaging the working surface - Sliding vice with sideways movement and fast positioning...

PH 262 HB, other than the manual cut mode, the sawing machine can make single cuts without operator HB CUTTING CYCLE: - After positioning the bar and closing the vice, the cutting phase is started, using the weight of the saw frame controlled by a hydraulic circuit to adjust the downfeed speed; after the cut the band stops, the frame is manually lifted in order to reposition the bar to cut untill the position needed by the operator, at this point the head frame is locked by the manually-controlled hydraulic valve. A FEW FEATURES: See PH 262

SHARK 281, manual band sawing machine to cut from 0° to +60°. A FEW FEATURES: - Electric panel (wiring totally identifiable, standby, loose-key safety switch, main switch, pole change switch, emergency stop, motor magnetothermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V). - IP55 control handle. - Vice with fast clamping device. - Hydraulic transducer to visualize band tensioning. - Electric pump for band lubrication and cooling. - Wire chip brush for band cleaning. - Double head return spring. - Adjustable rod to measure stop to...

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to +60°. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight controlled by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/closed by a manually-controlled valve (optional with pedal control). A FEW FEATURES: See SHARK 281.

SHARK 281 SXI evo, semi-automatic, electrohydraulic band sawing machine for cutting from 0° to +60°. - Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: starting the cycle by means of the relative push-button, the following steps are carried out: - the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. - Standard machine with operation in semiautomatic cycle only, that can be ordered with additional cutting...