1. Catalogs
  2. MENZEL Elektromotoren GmbH
  3. Modular slip-ring motors

Modular slip-ring motors

Modular slip-ring motors
1 / 29 PagesView full catalog

Modular slip-ring motors

Product catalog summary
Introduction: The document discusses the modular slip-ring motors of the MEBSSL, MEBSSW, and MEBSSD series, emphasizing their adaptability and durability. These motors are suitable for applications with high start-up and breakaway moments, extreme load surges, or low start-up currents relative to output. Their modular design supports various cooling, protection types, and mounting options, ensuring cost efficiency and reliability. They are used in industries like cement, paper, water, and steel for driving equipment such as mills and compressors.
Features: The motors are characterized by high efficiency, compact design, reliable bearings, low maintenance costs, and low noise emissions. They are customizable, designed for longevity, and capable of handling high loads.
Standards and Compliance: The motors adhere to European standards EN60034 and IEC34, with special versions available upon request.
Construction: Featuring a weld-iron housing with integrated foot plates, the motors are resistant to torsional vibrations and optimized for cooling. The housing and stator core are manufactured with minimal tolerances to reduce thermal resistance.
Configurations and Protection: Available in configurations IM B3 and IM V1, with custom versions possible. They offer IP 23 (MEBSSD) and IP 55 (MEBSSL, MEBSSW) protection, with other options available upon request.
Cooling and Insulation: Cooling options include IC 611 (air-air heat exchanger), IC 81 W (air-water heat exchanger), and IC 01 (ambient air cooling), with custom variants available. The motors use tropicalized windings in temperature class F, manufactured via VPI for durability and slow aging.
Bearings and Vibration: Standard models have grease-lubricated bearings with re-lubrication devices, with special bearings available for specific applications. Motors meet vibration severity grade N, with balance quality grade "half-key."
Rotor Data and Paint Finish: Rotor data can be customized for replacing existing motors. The standard paint finish is RAL 1016 "sulphur yellow," with other finishes available.
Voltage and Temperature Ratings: Available for various voltages at 50 Hz and 60 Hz, with special voltages upon request. Designed for ambient temperatures from -20°C to +40°C, with adjustments for higher or lower temperatures.
Unit Rating and Overload Capability: Ratings are based on S1 operation at 40°C and 1000 m altitude, with adjustments for different conditions. Motors can handle 1.5 times the nominal current for up to two minutes.
Terminal Boxes and Motor Protection: Terminal boxes are available in "right" or "left" configurations, with custom options available. Motors include temperature monitoring and vibration measurement, with additional sensors available.
Accessories and Tests: Equipped with a space heater and other accessories available upon request. Motors undergo factory testing, including winding resistance measurement, insulation resistance test, no-load test, short-circuit test, direction-of-rotation test, high-voltage test, vibration severity measurement, performance test of accessories, shaft voltage measurement, visual acceptance, and noise measurement. Additional tests can be conducted upon request.
Datasheets: Detailed specifications for the MEBSSL series motors are provided, including mounting, protection, cooling, voltage, frequency, poles, insulation class, heating class, and ambient temperature. A comprehensive table lists various motor types with their respective power, speed, current, power factor, efficiency, torque, voltage, inertia, and mass.
See more

Catalog excerpts

Modular slip-ring motors-1

MODULARE SCHLEIFRINGLAUFERMOTOREN MODULAR SUP-RING MOTORS BAUREIHEN / SERIES: MEBSSL/ MEBSSW/ MEBSSD

 Open the catalog to page 1
Modular slip-ring motors-2

Rotor Data Terminal Boxes Modulare Schleifringläufermotoren der Baureihen MEBSSL / MEBSSW / MEBSSD – flexibel und robust Modular Slip Ring Motors of the MEBSSL / MEBSSW / MEBSSD Series – Flexible and Robust Schleifringläufermotoren sind immer dort gefragt, wo hohe Anlauf- und Losbrechmomente realisiert werden müssen, extreme Laststöße auftreten oder im Verhältnis zur Leistung kleine Anlaufströme erforderlich sind. Der modulare Aufbau ermöglicht eine Vielzahl von Kühl- und Schutzarten sowie diverse Befestigungsmöglichkeiten. Die Grundkonstruktion des Motors ist dabei im Standard immer identisch....

 Open the catalog to page 2
Modular slip-ring motors-3

• Hoher Wirkungsgrad und geringste Betriebskosten • Kompaktes Design, kleine Abmessungen und geringes Gewicht • Zuverlässige und langlebige Lagerausführungen • Gute Schwingwerte und geringe Wartungskosten • Wicklungen in Wärmeklasse F (VPI) • Zuverlässigkeit und lange Lebensdauer • Hohe Belastbarkeit • Niedrige Geräuschemissionen • Kundenspezifische Sonderausführungen • High power efficiency and lowest running costs • Compact design, small dimensions, and low weight • Reliable and durable bearing construction • Great vibration signatures and low maintenance costs • Windings in temperature class...

 Open the catalog to page 3
Modular slip-ring motors-4

IC 01 ( MEBSSD): Die im Motor (Ständer und Läufer) entstehende Verlustwärme wird durch einen Lüfter, der die Umgebungsluft durch den Motor zieht, an die Umgebung abgegeben. Varianten, beispielsweise bei Drehzahlregelung, Zwangsbelüftung oder Rohranschluss bei besonders langsam laufenden Motoren, sind als Sonderausführung lieferbar. IC 01 (MEBSSD): The heat loss generated inside the motor (stator and rotor) is transmitted to the environment through a fan that draws ambient air through the motor. Variants, for instance in the case of speed control, forced ventilation or connection with air ducts...

 Open the catalog to page 4
Modular slip-ring motors-5

Die Motoren sind für folgende Nennspannungen lieferbar: The motors are available for the following nominal voltage ratings: Die zulässige Spannungstoleranz beträgt +/- 5%. The permissible voltage tolerance equals ± 5%. Sonderspannungen und abweichende Spannungstoleranzen sind auf Anfrage lieferbar. Special voltages and deviating voltage tolerances are available upon request. Die Motoren sind für einen Betrieb bei Umgebungstemperaturen von - 20 °C bis + 40 °C ausgelegt. Bei höheren Umgebungstemperaturen bis + 60 °C ist eine Leistungsreduzierung erforderlich. Für niedrigere Umgebungstemperaturen...

 Open the catalog to page 5
Modular slip-ring motors-6

Die Motoren werden, je nach Kundenvorgabe, mit Klemmenkastenlage „rechts“ oder „links“ geliefert. Depending on the respective customer specs, the motors are delivered with terminal boxes on the left-hand or right-hand side. Sonder-Klemmenkästen (z. B. mit Phasen-Trennung, mit Sonderabmessungen usw.) oder Einzelphasenstecksysteme sind auf Anfrage lieferbar. Special terminal boxes (e. g. including phase separation, special dimensions, etc.) or single-phase plug-and-socket systems are available upon request. Die Klemmenkästen können generell um 4 x 90° gedreht werden. The terminal boxes can generally...

 Open the catalog to page 6
Modular slip-ring motors-7

Baureihe MEBSSL Bauform IM B3 / Schutzart IP 55 / Kühlart IC 611 6000 V / 50 Hz / 4 polig Wärmeklasse F / Ausnutzung B / Umgebungstemperatur 40 °C MEBSSL Series Mounting IM B3 / Protection IP 55 / Cooling IC 611 6000 V / 50 Hz / 4 poles Insulation class F / Heating class B / Ambient Temperature 40 ° C * Baugröße 710 und größer mit Gleitlagerung * Frame 710 and up with sleeve bearings Technische Änderungen und Irrtümer vorbehalten. / Subject to technical modification and error. MENZEL Elektromotoren GmbH Neues Ufer 19-25 10553 Berlin, Germany | Tel.:+49-30-349922-0 | Fax:+49-30-349922-999 | www.menzel-elektromotoren.com...

 Open the catalog to page 7
Modular slip-ring motors-8

Baureihe MEBSSL Bauform IM B3 / Schutzart IP 55 / Kühlart IC 611 6000 V / 50 Hz / 6 polig Wärmeklasse F / Ausnutzung B / Umgebungstemperatur 40 °C MEBSSL Series Mounting IM B3 / Protection IP 55 / Cooling IC 611 6000 V / 50 Hz / 6 poles Insulation class F / Heating class B / Ambient Temperature 40 ° C Technische Änderungen und Irrtümer vorbehalten. / Subject to technical modification and error. MENZEL Elektromotoren GmbH Neues Ufer 19-25 10553 Berlin, Germany | Tel.:+49-30-349922-0 | Fax:+49-30-349922-999 | www.menzel-elektromotoren.com | [email protected]

 Open the catalog to page 8
Modular slip-ring motors-9

Baureihe MEBSSL Bauform IM B3 / Schutzart IP 55 / Kühlart IC 611 6000 V / 50 Hz / 8 polig Wärmeklasse F / Ausnutzung B / Umgebungstemperatur 40 °C MEBSSL Series Mounting IM B3 / Protection IP 55 / Cooling IC 611 6000 V / 50 Hz / 8 poles Insulation class F / Heating class B / Ambient Temperature 40 ° C Technische Änderungen und Irrtümer vorbehalten. / Subject to technical modification and error. MENZEL Elektromotoren GmbH Neues Ufer 19-25 10553 Berlin, Germany | Tel.:+49-30-349922-0 | Fax:+49-30-349922-999 | www.menzel-elektromotoren.com | [email protected]

 Open the catalog to page 9
Modular slip-ring motors-10

Baureihe MEBSSL Bauform IM B3 / Schutzart IP 55 / Kühlart IC 611 6000 V / 50 Hz / 10 polig Wärmeklasse F / Ausnutzung B / Umgebungstemperatur 40 °C MEBSSL Series Mounting IM B3 / Protection IP 55 / Cooling IC 611 6000 V / 50 Hz / 10 poles Insulation class F / Heating class B / Ambient Temperature 40 ° C Technische Änderungen und Irrtümer vorbehalten. / Subject to technical modification and error. MENZEL Elektromotoren GmbH Neues Ufer 19-25 10553 Berlin, Germany | Tel.:+49-30-349922-0 | Fax:+49-30-349922-999 | www.menzel-elektromotoren.com | [email protected]

 Open the catalog to page 10
Modular slip-ring motors-11

Baureihe MEBSSL Bauform IM B3 / Schutzart IP 55 / Kühlart IC 611 6000 V / 50 Hz / 12 polig Wärmeklasse F / Ausnutzung B / Umgebungstemperatur 40 °C MEBSSL Series Mounting IM B3 / Protection IP 55 / Cooling IC 611 6000 V / 50 Hz / 12 poles Insulation class F / Heating class B / Ambient Temperature 40 ° C Technische Änderungen und Irrtümer vorbehalten. / Subject to technical modification and error. MENZEL Elektromotoren GmbH Neues Ufer 19-25 10553 Berlin, Germany | Tel.:+49-30-349922-0 | Fax:+49-30-349922-999 | www.menzel-elektromotoren.com | [email protected]

 Open the catalog to page 11
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.