video corpo

Rugged Ethernet Switches Ethernet and Fieldbus Interfaces
13Pages

{{requestButtons}}

Catalog excerpts

Rugged Ethernet Switches Ethernet and Fieldbus Interfaces - 1

Rugged Ethernet Switches Ethernet and Fieldbus Interfaces Network Connectivity Platforms with Long-Term Availability Always reliable. Always ahead.

Open the catalog to page 1
Rugged Ethernet Switches Ethernet and Fieldbus Interfaces - 2

The Choice Is Yours Communicate via fieldbus, Ethernet or wireless network and connect to the Internet of Things with applicationready MEN devices. Unlimited fieldbus functions include CANopen, DeviceNet, Profibus DP, MVB, as well as real-time Ethernet variants like EtherCat, Powerlink, Ethernet/IP, Profinet, Modbus, Sercos, Varan, and AFDX. They are implemented on different hardware platforms such as CompactPCI, M-Module mezzanine boards, IP cores in FPGA, or PCI Express Minicards for integration in box PCs and panel PCs. Ethernet CANopen Profinet Powerlink EtherCAT Ethernet CANopen AFDX...

Open the catalog to page 2
Rugged Ethernet Switches Ethernet and Fieldbus Interfaces - 3

Switches, Routers and Gateways NM30 – Managed 8-Port Industrial Ethernet Switch NM50 – Mobile Gateway & WLAN Access Point NH30 – 40 HP Modular Managed Gigabit Ethernet Switch Up to 25 Gigabit Ethernet ports on rear I/O Or 3 ports on front and up to 22 ports on rear 29 Gbit/s carrier grade switch matrix Special switch protocols –40 °C to +85 °C with qualified components EN 50155 class TX compliant (railways) PICMG CPCI-S.0 CompactPCI Serial system slot and peripheral card GE1 – 4-Port Gigabit Copper Ethernet Line Card with PoE NM10 – Unmanaged 8-Port Ethernet Switch G101 – Managed Industrial...

Open the catalog to page 3
Rugged Ethernet Switches Ethernet and Fieldbus Interfaces - 4

G302 – Managed 16-Port Rugged Industrial Ethernet Switch G303 – Unmanaged 16-Port Rugged Industrial Ethernet Switch G304 – Unmanaged 4-Port Rugged Industrial Ethernet Switch with PoE+ F301 – Industrial Ethernet Switch Up to 16 Gigabit Ethernet ports on rear I/O Or 3 ports on front and up to 13 ports on rear Configuration via Telnet CLI, SNMP ver. 3 or external dongle Service interface via M12 LEDs for front port and board states –40 °C to +85 °C with qualified components EN 50155 class TX compliant (railways) PICMG CPCI-S.0 CompactPCI Serial system slot and peripheral card Up to 16 Gigabit...

Open the catalog to page 4
Rugged Ethernet Switches Ethernet and Fieldbus Interfaces - 5

3U Compact PCI F305 – Quad Fast Ethernet / Real-Time Ethernet Interface 4 HP 32-bit/33-MHz CompactPCI 4 Ethernet channels, 100 Mbit/s Real-time Ethernet capability Optical isolation from other cards Full EN 50155 compliance –40 °C to +85 °C qualified Conformal coating For rolling stock and wayside applications 3U Compact PCI F701 – MVB Interface Card 4HP 32-bit/33-MHz CompactPCI MVB Interface EMD/ESD+ according to IEC 61375 (TCN Standard) MVB Bus Administrator 4096 Process Data ports Message Data stack Driver support for WinXP, Win7 32/64bit and Linux –40 °C to +70 °C screened 3U Compact...

Open the catalog to page 5
Rugged Ethernet Switches Ethernet and Fieldbus Interfaces - 6

Mini PCI Express Card PX3 – MVB Interface Card 32-bit RISC Processor MVB Interface EMD/ESD+ according to IEC 61375 (TCN Standard) MVB Bus Administrator 4096 Process Data ports Message Data stack Driver support for WinXP, Win7 32/64bit and Linux –40 °C to +85 °C with qualified components Mini PCI Express Card PX50 – CANopen Communication Interface PCI Express, one lane port Full CAN/Extended CAN according to ISO-11898 CANopen master and slave by loadable firmware Based on netX universal network controller Optical isolation with 1000 VDC isolation voltage Driver support for all common...

Open the catalog to page 6
Rugged Ethernet Switches Ethernet and Fieldbus Interfaces - 7

Switch, Router, Gateway and WAP Devices Wall-Mount or DIN-Rail Industrial Ethernet Switches Type Front Connector Management firmware »» 0 W max. 1 (models without PoE) »» 5 W max. 8 (with 60 W PoE max.) »» 0 W max. 1 (models without PoE) »» 5 W max. 8 (with 60 W PoE max.) Management firmware

Open the catalog to page 7
Rugged Ethernet Switches Ethernet and Fieldbus Interfaces - 8

CompactPCI Industrial Ethernet Switch Cards Type Front Connector Fast Ethernet Interface Industrial Ethernet Switch Driver software not necessary Fast Ethernet / Real-Time Ethernet Interface MVB Interface Card (Multifunction Vehicle Bus) Windows, Linux CANopen Interface Board 1 x CANopen Interface, 1 x Diagnostic interface Windows, Linux, VxWorks, QNX DeviceNet Interface Board 1 x DeviceNet interface 1 x Diagnostic interface Windows, Linux, VxWorks, QNX Real-Time Ethernet Interface Board 2 x 10BASE-T or 100BASE-TX Ethernet 1 x Diagnostic interface Windows, Linux, VxWorks, QNX PROFIBUS...

Open the catalog to page 8
Rugged Ethernet Switches Ethernet and Fieldbus Interfaces - 9

Front Connector Management firmware Gigabit Ethernet copper line card with PoE Gigabit Ethernet PHY line card with PoE Gigabit SFP PHY line card Management firmware Gigabit Ethernet interface Windows, Linux Quad fiber optics interface

Open the catalog to page 9
Rugged Ethernet Switches Ethernet and Fieldbus Interfaces - 10

Due to the built-to-order concept and a high stockpiling of all components, the delivery time can be drastically reduced. Within a short time, customers receive their close-to-series prototypes and can immediately start develo- ping their application. Based on standard versions, there are many various configuration options. With MEN's built-to-order configurator, ordering an individually configured Ethernet Switch is as easy as pie. By choosing a basic unit with preconfigured functionality you can add all your necessary accessories from a range of components with compatible software and...

Open the catalog to page 10
Rugged Ethernet Switches Ethernet and Fieldbus Interfaces - 11

Our Custom Design Service It is MEN’s goal to find a tailored solution for the application together with our customers. While using as many standard COTS components as possible, parts of the solution may include customization: COTS and Custom Design Expertise » System level Whether standard or custom, MEN products benefit from our unique development expertise: » Board level » Component level (in FPGA) The Design Process Custom design at MEN follows a defined development process from specification to design, verification and validation of a product, which is part of our quality management...

Open the catalog to page 11
Rugged Ethernet Switches Ethernet and Fieldbus Interfaces - 12

Application Examples Why MEN? Development and production of rugged and reliable products Our boards and systems are developed to meet requirements such as temperature ranges between −40°C and +85°C through convection or conduction cooling, shock, vibration, chemical influence or the option of coating against humidity right from the start. Oilfield Server Platform and Router This robust server platform is installed directly on the drilling sites and communicates with the operator’s data processing center in real time from here via GSM, relaying all the data relating to the position of the...

Open the catalog to page 12

All MEN Mikro Elektronik catalogs and technical brochures

  1. box_panel

    5 Pages

Archived catalogs