Standard Product Overview 2006 Board-Level Computers forIndustrial Applications >

VMEbus Boards and Systems 4 CompactPCI > Boards and Systems 28 VMEbus Boards and Systems 42 Power Supplies 44 SA Ζ Serial Interface Adapters 45 Busless Single-Board Computers 47 Busless Systems and HMIs 50 System-on-Module ESM CompactPCI > Boards and Systems 4 Overview 6 28 Overview 30 B11 Ζ 3U VMEbus MPC8245 SBC / PC-MIP > 15 3U CompactPCI > ֮ /Express Core Duo SBC 7 F14 3U CompactPCI > ֮ 31 B202S 3U VMEbus M-Module > ֮ /Express Pentium > Carrier Board 32 A14C ٖ 6U VME64 MPC8540 SBC / PMC 33 A15C 6U VME64 MPC8245 SBC / PMC 34 A15B ֖ 6U VME64 MPC8245 SBC / M-Module > M SBC 8 F600 Ζ 3U CompactPCI...

System-on-Module ESM > ٙ M-Modules > for Instrumentation and Motion/Robotics 50 Overview 52 EM1N ٖ ESM 70 Introduction M-Module > ֙ Mezzanine I/O 71 C204 Short-Card PCI M-Module > ֙ with MPC5200B EM1A Rear I/O ESM > ֙ Carrier Board C203 Long-Card PCI M-Module 86 Overview 88 > ֙ with MPC5200B 53 EM3 ESM M97 ֖ Universal Counter > with MPC8560 EM3A ٖ Rear I/O ESM > Carrier Board 89 M78 ٖ 4-Channel Digital Oscilloscope > with MPC8560 54 EM8 ٖ ESM 90 M76 Digital Multimeter > ֙ with MPC8540 EM8A Rear I/O on J3 ESM 91 M70 ֖ Temperature Acquisition > with MPC8540 55 EM4N ٖ ESM M-Modules > for Analog...

N Type I; True IDE; DMA support > N VGA connector at front panel > N Dual-core Intel > ή Core > Duo T2500, L2400 (LV), U2500 (ULV) or single-core Celeron > N Two additional DVI connectors at front panel optional via side card > N Parallel IDE (PATA) > ٮ M 440, M 423 (ULV) > N One IDE port for local CompactFlash > , or: > N Simultaneous connection of two monitors > N Up to 2.0GHz processor core frequency > N One IDE hard-disk/CD-ROM port via on-board connector > N Up to 667MHz front-side bus frequency > N USB > CompactPCI N Chipset > N Serial IDE (SATA) > N Two USB 2.0 ports via Series A connectors...

N Ethernet > N One user LED > N ULV Celeron > ή M 373 up to Pentium > M 760 > N Two 10/100/1000Base-T Ethernet channels, or: one 10/100/1000Base-T and one 10/100Base-T channel > N Reset button > N 1.0 to 2.0GHz processor core frequency > ή N 400MHz or 533MHz front-side bus frequency > N Two x1 lanes to connect local 1000Base-T Ethernet controllers > N Chipset > N RJ45 connectors at front panel > N Northbridge: Intel > 915GM > N Ethernet controllers are connected by two x1 PCIe lanes > N Two x1 lanes for extension through side-card connector, or: > N Southbridge: Intel > ή ICH6M > CompactPCI N...

N Serial IDE (SATA) > N One port for on-board 2.5" hard-disk drive > N One port for external device > CompactPCI N Transfer rates up to 150MB/s (depends on hard disk, 28MB/s for 2.5" hard disk) > N RAID level 0/1 support (depends on CPU board) > N CompactPCI > J1 and J2 are assembled for increased mechanical stability and/or for power supply via J1 > N Up to four UARTs > N RS232..RS485, isolated or not: for free use in system (e. g. cable to front) > N Supply voltage/power consumption: > N From four CPU-controlled USB channels > N +5V (-3%/+5%), 21mA typ. (with two SA1 SA-AdaptersΙ, w/o hard...

N Celeron > ٮ or Pentium > III > N VGA > N Real-time clock, backed up by the carrier board > N 400MHz/650MHz or 933MHz processor core frequency > N Two USB 1.1 (Series A) > N Integrated hardware monitor > N Two Ethernet (RJ45) > N Reset button > N 100MHz or 133MHz system bus frequency > N Two RS232 UARTs COM1/COM2 (D-Sub) > N 4 FPGA-controlled LEDs > N 33MHz APIC bus frequency > N PS/2 keyboard/mouse > N Compliance with CompactPCI > Core Specification PICMG 2.0 R3.0 256KB or 512KB L2 cache integrated in CPU > CompactPCI N N Up to 512MB SDRAM system memory > N IDE > N System slot > N One 144-pin...

N Celeron > M (ULV) or Pentium > ή M > N Fast IDE ports > N USB > N 600MHz..1.8GHz > N One IDE port for local CompactFlash > or 1.8" hard disk or connection to mezzanine expansion board with on-board hard disk drive or external device (Secondary IDE) > N Two USB 2.0 ports > N i855 Chipset > N Two Series A connectors at front panel > N 82855GME Graphics/Memory Controller Hub (GMCH) > N Two ports via rear I/O transition module > N OHCI 1.0a implementation > N 82801D I/O Controller Hub (ICH4) > N One IDE port via rear I/O transition module (Primary IDE) > N Data rates up to 480Mbits/s > N 82802...

N PowerPC > ή N Three Ethernet (RJ45) > N Real-time clock with GoldCap backup > N MPC8540 PowerQUICC > III > N One RS232 UART (RJ45) > N Power supervision and watchdog > N 800MHz (666..833MHz optional) > N Reset button, GPIO-controlled > N e500 PowerPC > ٮ core with SPE APU and MMU > N Standard factory FPGA configuration: > N Three user LEDs, GPIO-controlled; 1 FPGA power status LED > N Integrated Northbridge and Southbridge > N Main bus interface > N High memory bandwidth > N 16Z070_IDEDISK IDE controller for NAND Flash > N Compliance with CompactPCI > Core Specification PICMG 2.0 R3.0 > N 2x32KB...

N FPGA-controlled > N Accessible via I/O connector > N PowerPC > Ю , MPC5200, up to 400MHz > N PIO mode 0 support > N Physical interface at front panel using SA-Adapter > via 10-pin ribbon cable on I/O connector > N 2x16KB L1 data and instruction cache intgrated in MPC5200 > N USB > N One USB 1.1 port > N RS232..RS485, isolated or not: for free use in system (e. g. cable to front) > N Up to 256MB SDRAM system memory > N Series A connector at front panel > N Soldered, DDR > N OHCI implementation > N Data rates up to 115kbits/s > CompactPCI N 64MHz memory bus frequency > N Data rates up to 12Mbits/s...

N Supply voltage/power consumption: > N +5V (-3%/+5%), 1200mA max. > N +3.3V (-3%/+5%), 400mA max. > N MTBF: 442,000h @ 40аC (derived from MIL-HDBK-217F) > N Dimensions: conforming to CompactPCI > specification for 3U boards > N Weight: 200g > N Temperature range (operation): > N -40..+85ΰC > N Airflow: min. 10m/h > N Temperature range (storage): -40..+85ӰC > CompactPCI N Relative humidity (operation): max. 95% nc > N 9-port Ethernet switch device KS8999 > N Compliance with cPCI > ή Specification 2.0 R3.0 > N Relative humidity (storage): max. 95% nc > N Eight 10/100Base-T transceivers > N Only...