catalog_men_compactpci_serial
5Pages

CompactPCI® goes Serial! Solutions with CompactPCI®, CompactPCI® PlusIO and CompactPCI® Serial

CompactPCI®Serial SBCs CompactPCI® Serial is based on the mechanics of CompactPCI®, so it remains compatible to IEC 1101, but it only supports modern point-to-point connections. The CompactPCI® Serial architecture, a simple star combined with a complete mesh for Ethernet, functions without switches and bridges. There is a system slot and up to eight peripheral slots with congruent pin assignments. G51 – 3U CompactPCI® Serial PowerPC® Communications CPU Board SBC, router, NAS and wireless platform with up to 8 Gb Ethernet P3041 Freescale™ QorIQ™ quad-core PowerPC® processor HP system master...

Compact PCIRSerial Peripheral Boards ■ Data rate up to 5 Gbit/s per direction per port G204- 3U M-Module™ Carrier Board ■ -40°C to +85°C with qualified components G211 - 3U Quad Gigabit Ethernet Interface ■ Four 10/100/1 OOOBase-T Ethernet channels ■ Alternatively two redundant channel pairs G211F - 3U Quad Fiber Optics Interface ■ Four optical transceiver channels 10OOBase-SX ■ Alternatively two redundant channel pairs ■ Full-duplex or half-duplex depending on transceiver ■ -40°C to +85°C screened (without transceivers) G212- 3U PCIe® MiniCard Carrier for Wireless Functions ■ Up to 2 PCI...

CompactPCI®PlusIO/Serial Systems To package CompactPCI®, CompactPCI® PlusIO and CompactPCI® Serial boards we use enclosures and backplanes from Schroff®. In addition to their maintenance friendly and robust architecture, 19” systems have a modular setup regarding housing dimensions, backplane sizes and pinout, PSUs and use of different mass storage devices. The following enclosures are the basis for individually tailored system configurations. CPCI Serial Rack – Single Euro with Conduction Cooling For standard 3U cards within CCA frames 3U backplane System slot left, horizontal installation...

Key Features of CompactPCI® Serial With CompactPCI® Serial (PICMG CPCI-S.0) the CompactPCI® architecture moves to serial high-speed interconnects. A configuration of one system slot and up to eight peripheral slots does not need switches and bridges. Keeping the proven 19” mechanics of the IEC 1101 as well as hot-plug, the standard introduces a new rugged connector with a signal density of up to 184 pin pairs (on 3U) and transmission frequencies of 12 Gbit/s. The system slot supports 8 PCI Express® links, 8 SATA/SAS, 8 USB 2.0/3.0 and 8 Ethernet interfaces plus signals for general system...