Brochure Incubators
32Pages

{{requestButtons}}

Catalog excerpts

Brochure Incubators - 6

Stainless steel, material 1.4301 (ASTM 304) with all-round deep-drawn ribs to integrate the largearea heating with ceramic-metal sheath Textured stainless steel, rear zinc-plated steel, intuitively operated SingleDISPLAY or TwinDISPLAY (TFT colour display) with touchscreen; inner glass door, outside fully insulated stainless steel door (from size 450 two leaves) Admixture of pre-heated fresh air by electronically adjustable airflap Mains cable with plug (German type) Standard units are safety-approved and bear the test marks: 4 feet; sizes 450/750 mounted on lockable castors Model...

Open the catalog to page 6
Brochure Incubators - 7

Voltage 115 V, 50/60 Hz Extended overtemperature protection by additionally integrated Pt100 sensor for independent temperature monitoring for models with SingleDISPLAY Chamber modification for the application of reinforced perforated stainless steel shelves or stainless steel grids (bearing rails mounted in the working chamber) - includes replacement of standard grids by reinforced grids Interior lighting for observing the load Interior socket (can only be ordered with limited temperature range - max. +70 °C), ampacity 230 V, 2.2 A, can be switched off with the On/Off switch, cannot be...

Open the catalog to page 7
Brochure Incubators - 8

Accessories USB User-ID stick (with User-ID licence): Oven-linked authorisation licence (User-IDprogramme) on Memory-stick, prevents undesired manipulation by unauthorised third parties. When reordering please specify serial number (only for units with TwinDISPLAY) USB stick with documentation software AtmoCONTROL and operation manual for products with SingleDISPLAY (the standard equipment of appliances with TwinDISPLAY includes one USB stick with AtmoCONTROL). When reordering please specify serial number Set of height adjustable feet (4 pcs) Stacking set (4 pcs) for stacking of appliances...

Open the catalog to page 8
Brochure Incubators - 12

Stainless steel, material 1.4301 (ASTM 304), deepdrawn, seamlessly welded Textured stainless steel, rear zinc-plated steel, intuitively operated TwinDISPLAY (TFT colour display) with touchsceen; fully insulated stainless steel door and heated inner glass door Automatic sterilisation: Humidity and CO2 sensor sterilised inside the CO2 incubator Mains cable with plug (German type) Standard units are safety-approved and bear the test marks: Model sizes/Description Stainless steel interior Textured stainless steel exterior Standard equipment Volume Width Height Depth (less 35 mm for fan) Max....

Open the catalog to page 12
Brochure Incubators - 13

Model sizes/Description Packing data approx. kg approx. kg approx. mm approx. mm approx. mm Voltage 115 V, 50/60 Hz Battery-buffered ControlCOCKPIT: Uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure. The CO2 parameter is continously regulated Two gas connections with quick release connectors for automatic switch-over of gas cylinders; incl. two CO2 connection sets: hose with coupling and clamp Electropolished interior Active microprocessor control for humidifying and dehumidifying (40 -...

Open the catalog to page 13
Brochure Incubators - 14

Ethernet connection cable 5 m for computer interface USB User-ID stick (with User-ID licence): Oven-linked authorisation licence (User-ID-programme) on Memory-stick, prevents undesired manipulation by unauthorised third parties. When reordering please specify serial number Stacking set (4 pcs) for stacking of appliances of same size Stacking set (consisting of stacking corners, one connecting plate for the rear, two wall brackets) for stacking of two units of same size Stacking set (consisting of stacking corners, one connecting plate for the rear, two wall brackets) for stacking of two...

Open the catalog to page 14
Brochure Incubators - 18

COMPRESSOR-COOLED INCUBATORS ICPeco COMPRESSOR-COOLED INCUBATORS ICPeco according to DIN 12880:2007-05, EN 61010-1 (IEC 61010-1), EN 61010-2-010 Stainless steel, material 1.4301 (ASTM 304) Standard units are safety-approved and bear the test marks: Textured stainless steel, rear zinc-plated steel, intuitively operated TwinDISPLAY (TFT colour display) with touchscreen; inside glass door, outside fully insulated stainless steel door (from size 450 two leaves) Mains cable with plug (German type) Mounted on lockable castors Model sizes/Description Stainless steel interior Textured stainless...

Open the catalog to page 18
Brochure Incubators - 19

Options Chamber modification for the application of reinforced perforated stainless steel shelves or stainless steel grids (bearing rails mounted in the working chamber) - includes replacement of standard grids by reinforced grids Interior socket, ampacity 230 V/2.2 A, can be switched off with the On/Off switch, cannot be switched individually, moisture tight IP68 Entry port, 23 mm clear diameter, for introducing left centre/centre connections at the side, can be closed by flap and left centre/top silicone stopper, standard positions right centre/top COMPRESSOR-COOLED INCUBATORS ICPeco Entry...

Open the catalog to page 19
Brochure Incubators - 20

COMPRESSOR-COOLED INCUBATORS ICP according to DIN 12880:2007-05, EN 61010-1 (IEC 61010-1), EN 61010-2-010 Stainless steel, material 1.4301 (ASTM 304) Standard units are safety-approved and bear the test marks: Textured stainless steel, rear zinc-plated steel, intuitively operated TwinDISPLAY (TFT colour display) with touchscreen; inside glass door, outside fully insulated stainless steel door (from size 450 two leaves) Mains cable with plug (German type) Mounted on lockable castors Model sizes/Description Stainless steel interior Textured stainless steel exterior Volume Width Height Depth...

Open the catalog to page 20
Brochure Incubators - 21

Options Voltage 115 V, 50/60 Hz Chamber modification for the application of reinforced perforated stainless steel shelves or stainless steel grids (bearing rails mounted in the working chamber) - includes replacement of standard grids by reinforced grids Interior socket, ampacity 230 V/2.2 A, can be switched off with the On/Off switch, cannot be switched individually, moisture tight IP68 Entry port, 23 mm clear diameter, for introducing left centre/centre connections at the side, can be closed by flap and left centre/top silicone stopper, standard positions right centre/top Entry port...

Open the catalog to page 21
Brochure Incubators - 24

PELTIER-COOLED INCUBATORS IPPeco PELTIER-COOLED INCUBATORS IPPeco according to DIN 12880:2007-05, EN 61010-1 (IEC 61010-1), EN 61010-2-010 Stainless steel, material 1.4301 (ASTM 304), deepdrawn Standard units are safety-approved and bear the test marks: Textured stainless steel, rear zinc-plated steel, intuitively operated SingleDISPLAY or TwinDISPLAY (TFT colour display) with touchscreen Double doors: Outside stainless steel, fully insulated, inside glass (size 1400/2200 stainless steel doors with glass sector, fully heated inner glass panes integrated in the full-sight glass door with...

Open the catalog to page 24

All Memmert GmbH + Co. KG catalogs and technical brochures

  1. Steriliser S

    2 Pages

  2. Incubator I

    2 Pages

  3. ServicePlus

    2 Pages