Aquinity² P10

Product catalog summary

Overview: The Aquinity² P10 is a system designed to produce ultra pure water from tap water, achieving a quality of 0.055 µS/cm. It features a reverse osmosis module and a 10-liter storage tank, with a production rate of 8 L/h. The system includes a mixed bed cartridge for further purification and a flexible dispenser for water tapping.

Technical Specifications:

Ultrapure water quality: 0.055 µS/cm, Type I
Resistivity: 18.2 MΩ·cm
Total Organic Carbon (TOC): < 10 ppb (Reagent), < 3 ppb (Analytical)
Dispensing flow rate: 1.5 L/min
Productivity rate: 8 L/h
Bacteria: < 1 cfu/mL
Particulate: > 0.2 µm less than 1 particulate/mL
RNAse: < 1 pg/mL
DNAse: < 5 pg/mL
Dimensions, weight, power: 504 x 340 x 535 mm, 16-20 kg, 110-230 V

Feed Water Requirements:

Type: Tap water
Conductivity: < 1400 µS/cm
Inlet pressure: 1.5 to 6 bar
Free chlorine: < 0.1 mg/L
Silt Density Index (SDI): < 3
pH: 3 to 9
Temperature: 5 to 25 °C

Configurations: The system is available in two configurations: Reagent and Analytical, to meet specific ultrapure water quality requirements. It also offers a bench integrated (BI) version and a wall-mounted configuration to save space.

Features:

Volumetric dispensing with increments of 0.1 L, preventing overflow.
TOC monitoring for continuous organic content checks.
User interface with a touch screen monitor displaying data and warnings, supporting self-diagnostics to reduce service time and costs.

Consumables: Includes various modules and filters such as the Ultrapure Module MemPak LS and AL, UV lamp, vent filter, Pretreatment Module ProPak R10, and Final Filter capsule.

Contact Information: Manufactured by membraPure GmbH, located in Hennigsdorf, Germany. Contact via phone or email for more information.

Catalog excerpts

Aquinity² P10 Produces Ultra pure Water

Open the catalog to page 1

The Aquinity² P10 system is designed for the production of ultra pure water (0.055 µS/cm) out of tap water.

Open the catalog to page 3

The Aquinity² P10 system is equipped with a reverse osmosis (RO) to produce deionised water into the integrated 10 liter storage tank with a production rate of 8 L/h. In the next step the ultra pure water is produced with a combination of optimized mixed bed cartridge and can be tapped with a ﬂexible dispenser. If water is not used, automatic recirculation within the Aquinity² system ensures a permanent high quality of ultra pure water. All components of the Aquinity² are assembled in an especially designed housing. The system can be easily opened by removing the side panel to access the ultra...

Open the catalog to page 4

Storage Tank Final Filter Ultrapure Scheme shows ﬂowchart of Aquinity² P 10 Analytical TI.

Open the catalog to page 5

Technical Specifications * not possible to tap pure water ** with microbiological final filter

Open the catalog to page 6

Aquinity2 P10 is available in two configurations (Reagent & Analytical) to fit the specific requirements of ultrapure water quality for different applications.

Open the catalog to page 8

Options wall mounted conﬁguration To save valuable benchtop space the system can be ordered as wall mounted conﬁguration.The whole system can me mounted on the wall with inclined display. volumetric dispensing TOC monitoring (TI version) The TOC monitoring during production and intermittent measurements during non-use periods allows to check the organic content in water continously between 1 and 999 ppb. bench integrated (BI version) To save valuable benchtop space the Aquinity² can be ordered as BI conﬁguration. The system will be installed underneath the work bench and only the display and...

Open the catalog to page 9

Currently recorded data and warning messages will be displayed on the touch screen monitor. The software furthermore supports the user with a self-diagnostic module which reduced service time and costs. £3 K © Helping tools to maintain system

Open the catalog to page 10

Open the catalog to page 11

Made in Germany, Your trusted partner for 30 years [email protected] www.membrapure.de

Open the catalog to page 12

All MembraPure catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list