Catalog 2
3Pages

Solder paste printing＆Reballing Solder paster printing Before mounting component To reuse a component during rework All can be easily done by Rebcom RBC series. Applicable to various application. Cost reduction / Shortening of parts analysis time/ Shorten lead time due to parts procurement / Eco activities Amazingly simple use and time saving Initial cost and running cost are relatively low With a minimizing human error, reballing work can be completed without variation. 【Special Feature】  Simple one-touch positioning The mechanism of Guide pins of main unit is designed to match with Guide holes of mask frames and all other tools. As a result, all the positioning along the whole process can easily be done with time efficiency.

【Transfer tool】 To remove a part to Rework system without a direct touching. 【Centering tool】 To make a part position at the center by one single hand with one single action.  All these tools are provided in a standard set. Transfer tool Heating stage 【Heating stage】 A heating stage for reball is also provided. Centering tool 【Mask frame/Mask removal tool】 To suppress mask warp during use. And to support various different size of mask. Mask removal tool ※ Mask(Stencil) is not included in a standard set. ※Digital gauge is an optional item which is not included in a standard set.  In case...

This page is to show the attachments detail. The attachments is including in the cost of quotation. Attachments of RBC-1 V2.0 A : Mask holder (Printing) B : Mask holder (Reballing) C : Hold stand for a Centering tool D : Centering tool E : Transfer tool F : Heating stage G : Mask removal tool H : Ball brush (ESD proofed) I : SUS Squeegee J : Vacuum-ring K : Clearance gauge L : Digital Gauge for Z axis A：Mask holder (Printing) B：Mask holder (Reballing) C：Centering tool D：Hold stand for a Centering Tool E：Transfer tool F：Heating stage G：Clearance gauge (Large size） H：Ball brush (ESD proofed)...