0787.meis.flt.eng.qxp 17.10.2006 Order group 12:22 Uhr Seite 2 Carrier material as per DIN 1614 or 17100 StW 22 St 37-2 Z 150 150 g/m2 min. coating as per DVV For your query: Zinc Coating* 150 g/m2 20 My Area of application Dimension Z 225 225 g/m2 min. coating St 33 St 37-2 StW 22 225 g/m2 30 My Thickness Width [mm] [mm] St 33 St 37-2 StW 22 300 g/m2 40 My Z 500 500 g/m2 min. coating St 33 St 37-2 StW 22 500 g/m2 70 My Slitted edge strip Rounded edge strip Steel Quality Z 300 300 g/m2 min. coating Edges StW 22 St 33 St 37-2 Zinc Coatings Z 150 Z 225 Z 300 Z 500 Coil weight Coil outer dimensions With welded joint Rods Rod length [mm] Bundles If you require other steel qualities or zinc coatings, please get in touch with us direct. Coil dimensions Crane bundle weight [kg] *Min. zinc coating thickness in g/m2 per free surface Shipping form Permissible dimensional deviation as per DVV Nominal width 1.0 - < 2.0 mm +0.8 mm +/-0.15 mm -0.15 +0.21 mm +0.8 mm +/-0.17 mm -0.17 +0.23 mm City / Postcode: 6.0 mm +0.8 mm +/-0.19 mm -0.19 +0.25 mm Phone: 1.0 - < 2.0 mm +0.8 mm +/-0.18 mm -0.18 +0.24 mm Fax: +0.8 mm +/-0.20 mm -0.20 +0.26 mm 4.0 - +0.8 mm +/-0.22 mm -0.22 +0.28 mm Disposable pallet Europallet Address: 2.0 - < 4.0 mm 125 mm Nominal Thickness Tolerance 4.0 100 - Nominal Width Tolerance 2.0 - < 4.0 mm 15 - < 100 mm Nominal thickness Standard Flat stack [kg] [mm] Without welded joint 6.0 mm For other tolerances please get in touch with us direct. Company: Contact person: Zinc coating Zinc coating 150/225 g/m2 300/500 g/m2 Please fax any price queries to our sales office. We would be pleased to make you a nonbinding offer. Sales Meiser Bandverzinkung GmbH Bahnhofstrasse D-66839 Schmelz-Limbach Phone: 06887-3091919 Fax: 06887- 3093939 Production Alleestrasse 5 D-66386 St. Ingbert Phone: + (49) - 6894 / 921 460 Fax: + (49) - 6894 / 921 4620 Strip Coating Processes

Slitted edge strip: Rolled from hot wide strip and then cified. The edges are slightly sharp Rounded edge strip: The same process as with the slit- ted edge strip except that the edges are then rounded off by machining Dimensions Programme: Other measurements available on request. Just give us a call or Zinc Coatings The main influence on processabi- ticular is the thickness of the zinc For special requirements in terms of ductility and the manual or mech- anical production of sections, design components, cable harnes- For standard requirements in terms of corrosion protection and rela- tively...