Wear-optimised, troughed floor for MEILLER tipper semi-trailers | meiller.com

Tailored blanks Wear-optimised, troughed floor for MEILLER tipper semi-trailers The tipper body of a tipper semi-trailer is designed for the toughest requirements. Abrasive wear and tear is highest at the rear of the tipper body. Tailored blanks from MEILLER reinforce the tipper semi-trailer of the 44 type MHPS series in exactly this zone – with the same high payload. Optimum combination of wear resistance and weight Increased lifetime: In the heavily stressed third at the rear, the floor plate is 1 mm thicker than in the front Front wall area of the tipper body. This reduces the level of wear....

Tailored blanks (TB) are available for the 4(5) and 5(6) mm floor plate variants. ■■ Variant 4(5): Front area 4 mm, rear third 5 mm Abrasive wear and tear of the trough floor in % with an initial thickness of 5 mm and a trough length of 7.4 m ■■ Variant 5(6): Front area 5 mm, rear third 6 mm Advantages of tailored blanks compared to a continuous floor: Example of TB 5(6) instead of 6 mm floor ■■ Weight in the front area of the tipper body reduced by 1 mm floor thickness ■■ 81 kg less weight The floor/wall combinations apply according to the currently valid sales programme. Your benefits: ■■ High...

MEILLER in your area Full service from a single source Present worldwide MEILLER locations/sales offices There's a MEILLER location near you. Find the service workshops closest to you by searching online at meiller.com/service 1744_En-791-0719 Technical specifications are subject to modification without notice. Illustrations may show special equipment. Service workshops