video corpo

STX40

STX40
1 / 12 PagesView full catalog

STX40

Product catalog summary
Overview
The STX40 is a portable cable fault location system designed for outdoor use, featuring a lightweight and rugged design suitable for extreme environments. It is IP43 rated for weather resistance and equipped with pneumatic tires for easy transport.

Specifications
The system includes a Teleflex® RDR cable radar for TDR, an insulation testing module, a high voltage DC source, a multi-stage surge generator, and a high-frequency burner. It is fully automated with motorized HV switches and supports fault location in low and medium voltage power cables.

Fault Location Techniques
The STX40 employs nine fault locating technologies, such as insulation resistance measurement, DC breakdown detection, and arc reflection methods. It is capable of pinpointing high-resistance faults and detecting LV earth faults and MV sheath faults.

Performance on PILC/MIND Cables
The system is effective on PILC and MIND cables, using a high DC hipot, capacitor discharge, and TDR to reliably locate faults.

Safety Features
The STX40 complies with standards like DIN EN 50191 and VDE 0104, featuring a discharging and earthing unit, emergency stop, hardwired push buttons with LED indicators, and connection monitoring for safety.

Key Benefits
The toolbox philosophy allows technicians to choose the best method for each fault type, offering performance comparable to cable test vans.

Safety Features
  • Emergency stop for immediate shutdown.
  • Hardwired push buttons with LED status indicators.
  • EN50191-compliant external safety device.
  • Connection monitoring for operational and safety earths.
  • Reference earth monitoring for hazardous touch potentials.
5 Safety Rules
  1. Turn off power and disconnect.
  2. Secure against reconnection.
  3. Verify de-energisation.
  4. Earth and short-circuit.
  5. Cover or close off live parts.
Support and Training
Megger offers extensive support and training, with local networks and training available worldwide.

Product Capabilities
  • Detects high and low-resistance cable faults.
  • Detects sheath faults and localises cable routes.
  • Pinpointing with magnetic-acoustic surge wave receiver.
  • Additional sheath fault location and cable tracing capabilities.
Case Studies and Application Notes
Includes case studies on fault location in medium-voltage cables in wind farms and railway applications.

For more information, visit www.megger.com.
See more

Catalog excerpts

STX40-1

STX40 Portable cable fault location system

 Open the catalog to page 1
STX40-2

STX40 – second to none! Made for demanding outdoor use Modern fault location systems have to meet steep requirements to be considered truly portable and thus outdoor-ready for use in the field. Such units must be lightweight, rugged, hardened to hostile and challenging environments, very mobile in adverse terrain and as compact in size as possible. The units must also be operable in rain as well as in very bright daylight conditions with intense sunshine. The STX40 is the only fault locating unit in its class with such a degree of outdoor-readiness. No competitor product comes even close. The...

 Open the catalog to page 2
STX40-3

Modern cable fault location with automation and central control The portable STX40 sets a new standard for modern cable fault location technology: a compact, fully integrated solution for finding high-resistance, low-resistance and intermittent faults in low-voltage (LV) and medium-voltage (MV) power cables, all in a single robust housing. The STX40 comes with the latest generation built-in Teleflex® RDR cable radar for time domain reflectometry (TDR), and also includes an insulation testing module, a powerful high voltage (HV) DC source, a multi-stage surge generator (thumper) for pinpointing...

 Open the catalog to page 3
STX40-4

Performance otherwise only possible in cable test vans The well-equipped toolbox for cable fault location Fault finding on PILC/MIND cables Cable faults in underground installations are as diverse as the cable designs themselves. Some are low-resistance faults, often detectable with a TDR but rather difficult to pinpoint; others are high-resistance faults and require HV prelocation methods such as ARM, yet are comparatively straightforward to pinpoint once measured in distance; and some faults appear and disappear without warning - the so-called intermittent faults. Each has its own character,...

 Open the catalog to page 4
STX40-5

9 fault locating techniques The STX40 is a fault locating powerhouse and offers 9 different built-in technologies to find faults successfully. Insulation resistance measurement DC breakdown detection (DC hipot) Fault conversion by DC burning Arc Reflection (ARM) with inductive ARM filter, including BestPicture® Multishot technology Prelocation with Time Domain Reflectometry (TDR / cable radar) Voltage decoupling (Decay) Detecting and pinpointing LV earth faults and MV sheath faults using the voltage gradient method (step voltage method) together with ESG NT2 Pinpointing high-resistance faults...

 Open the catalog to page 5
STX40-8

5 SAFETY RULES Working in a de-energised state Safety is paramount The STX40 solution comes with a sophisticated built-in safety system compliant to numerous national and international safety standards, for example: 1 - Turn-off power and disconnect. 2 - Secure against reconnection and reclosing. 3 - Verify that the installation is de-energised 5 - Cover or close off adjacent live parts. ■ DIN EN 50191 and VDE 0104: Erection and operation of electrical test equipment ■ DIN EN 61010: Safety requirements for electrical measurement equipment, control, and laboratory ■ VDE 0105: Operation of electrical...

 Open the catalog to page 8
STX40-9

You will not be left alone: training & support from the specialists A tremendous benefit to purchasing any test instrument from Megger is that we won’t disappear after your purchase! We do have broad and in-depth technical expertise, application knowledge and experience in the field which we can all share with you. We have invested heavily in creating a local support network of engineers to provide a rapid response by people who understand your challenges and needs. Product and application training can also be offered at your premises or in specialist training facilities around the world. More...

 Open the catalog to page 9
STX40-10

What else can we offer you for your daily demands? Localises cable routes Detects high-resistance cable faults in the main insulation Detects sheath faults DIGIPHONE+2 Pinpointing with magnetic-acoustic surge wave receiver DIGIPHONE+2 NT SET Additionally sheath fault location using 50/60 Hz voltage gradient method DIGIPHONE+2 NTRX SET Additionally cable tracing with detection of current direction Datasheet digiPHONE+ 2 series Detects low-resistance cable faults in the main insulation

 Open the catalog to page 10
STX40-11

Application note and case studies about STX40 and digiPHONE+2 Cable fault location on multi-core signalling cables in railway applications Fault location on a MV cable in a wind farm APPLICATION NOTE Title Main Secondary title Cable fault location on multi-core signalling cables in railway applications using the STX40 CASE STUDY Title Main Secondary title Locating a fault on a medium voltage cable in a wind farm V01 - APRIL 24 Fault location on a MV cable in a wind farm Fault location on MV cable in a wind farm (switchgear to wind turbine) EN CASE STUDY Title Main Secondary title Locating a fault...

 Open the catalog to page 11
STX40-12

Megger Germany GmbH · Dr.-Herbert-Iann-Str. 6 · D-96148 Baunach Tel. +49 (9544) - 680 · Fax +49 (9544) - 2273 [email protected] www.megger.com The information in this document is subject to change without notice and should not be construed as a commitment by Megger Germany. Megger Germany assumes no responsibility for any errors that may appear in this document. STX40_BR_EN_V03.pdf The word ‘Megger’ is a registered trademark. Copyright ©

 Open the catalog to page 12

All Megger Germany GmbH catalogs and technical brochures

  1. SmartEAR

    16  Pages

  2. MAGTRACK

    8  Pages

  3. UHF PD detector

    12  Pages

  4. PD SCAN

    12  Pages

  5. 4 wave forms

    20  Pages

  6. M-Thump5-1000

    12  Pages

  7. CI/LCI

    8  Pages

  8. digiPHONE+2

    8  Pages

  9. CARLOC

    4  Pages

  10. PRIMEON

    20  Pages

Archived catalogs

  1. Correlux C-3

    4  Pages

  2. GT-3-NB-IoT

    8  Pages

  3. Sebalog D-3

    4  Pages

  4. SebaFlow

    8  Pages

  5. HL 7000

    8  Pages

  6. SmartEAR

    8  Pages

  7. POSEYEDON

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.