Group: Megger Germany GmbH
Catalog excerpts
PRIMEON Centrally controlled and automated cable fault location and cable testing van
Open the catalog to page 1Centrally controlled, fully integrated The PRIMEON test van system redefines the state-of-the-art: It is a complete solution for cable fault location and can also be configured with VLF testing and diagnostics options. PRIMEON comes with an in-built radar of the Teleflex® RDR type for time domain reflectometry, furthermore with an insulation testing unit, a very powerful high voltage DC source, a multi-stage surge wave generator (thumper) for pinpointing with the digiPHONE+2, a high frequency burner for fault conversion, and a set of industry-standard radar-based and transient prelocation...
Open the catalog to page 2■ Insulation resistance testing ■ TDR-based and transient methods ■ Time Domain Reflectometry ■ Magnetic-acoustic pinpointing via surging/ (Radar) thumping in multiple voltage ranges ■ HV DC testing (DC hipot) ■ Sheath testing and sheath fault pinpointing ■ Fault conditioning (Burning)
Open the catalog to page 3Eletrical performance: STX inside! A benchmark for safety Occupational safety and safe working conditions are paramount for us and our customers. Therefore, Megger products are designed to be the safest in the market. Primeon is no exception to that. It meets the strict requirements of EN 50191:2010, VDE 0104:2011 and other standards. Equipped with a ground connection monitoring circuit (F-Ohm) and a touch potential monitoring circuit (F-U or F-Voltage), Primeon is a milestone and the most compact fault location system with the highest safety standards in the market, by far.
Open the catalog to page 4Choose the control unit whichever fits you best! Standard mount rotatable, tiltable 15 inch Standard mount rotatable, tiltable Tablet-style mobile mount flat back plate, freely moveable 15 inch Comfort mount extendable, rotatable, tiltable, vertically adjustable, latching
Open the catalog to page 5Radar performance: Teleflex® RDR ■ PRIMEON comes with a best-in-class radar, but you need more? Upgrade your TDR with the performance package Teleflex Unleashed. Teleflex Unleashed! More pulse voltage, more pulse width, advanced denoising technology, averaging and long range signature boost mode! Get the TDR technology which set the world record for the longest ever successful TDR measurement! User convenience is key: Centralised control and fully automated operation ■ Very convenient system control from one central touchscreen control unit Software-driven user interface via one single...
Open the catalog to page 6Lots of space available for shelving or for a test and diagnostics system Standard The standard output solution requires a plugboard to take in the short end (pigtail) of the HV cable. It cannot be considered touchproof thus interlocked HV compartment monitoring and door contacts are necessary. Any combined system with fault location and diagnostics will need the standard output. Coaxial The coaxial output solution does not require a plugboard and is touchproof because the concentric HV cable is directly plugged into the STX. The coaxial solution is best suited for fault location systems...
Open the catalog to page 7Choose a setup which perfectly fits your daily requirements Fault locating Create your perfect package!
Open the catalog to page 8Fault locating Need more performance for certain applications? Add up to 3 fault locating packages to your Primeon base system and expand your capabilities! Utility location package (PACK 1) Add a centrally controlled audio frequency generator which is able to provide powerful signal outputs at various frequencies for performing tasks such as line location, cable route tracing and pinpointing of low resistance faults. Don’t forget to order a utility locator like the Ferrolux or the NTRX line location set of the digiPHONE+2. Fault conversion package (PACK 2) Add a resonance burner which is...
Open the catalog to page 9Did you know? VLF testing has been a well-established well-proven technology for onsite cable testing for over 35 years now. The original VLF was invented and introduced by HDW Elektronik Kiel in 1986! Testing in accordance with international standads VLF testing is supported by many international standards, namely VDE 0276, CENELEC HD 620, IEC 60060, IEC 60502 and IEEE 400.2. Test parameters: Voltage, frequency, duration VLF test voltages are always expressed and prescribed as RMS values because the essential point is the energy. Typically, VLF tests are carried out at a voltage level of...
Open the catalog to page 10BASIC ADVANCED 0 VLF Testing PD Testing ^ Tan delta ^ Sine wave Cosine-Rectangular DAC (Damped AC) VLF Testing PD Testing ^ Tan delta E^ Sine wave Cosine-Rectangular DAC (Damped AC) Entry-level solution for cable testing and limited diagnostics with dielectric loss factor Entry-level solution for cable testing and limited diagnostics with dielectric loss factor and PD testing using 0,1 Hz sine 44 kVRMS (62 kVpeak) ULTIMATE VLF Testing PD Testing 0 Tan delta 0 Sine wave Ey? Cosine-Rectangular E^ DAC (Damped AC) The ultimate diagnostics machine. All technologies and waveshapes included VLF...
Open the catalog to page 11PRIMEON fits into many different types of vehicles. 4x4 Ranger? No problem!
Open the catalog to page 12The control unit is freely movable but can also be attached to the passenger seat so that the system can be operated from the back seat.
Open the catalog to page 13Another example of a special installation – a trailer solution
Open the catalog to page 14And yes, we can also do EVs! The first cable test van with environmentally friendly eco-power Yes, we too can go “Eco”! We proved it when we installed the PRIMEON cable measurement system into an Opel Vivaro-e, showing that our technology also works in electric cars. Indeed, our mechanics and vehicle builders were able to master the challenges of the chassis and electronics, thanks to training by TÜV Süd. We also had an engineering breakthrough when we discovered a solution for the electrical wiring, enabling it to operate without affecting the on-board network. Thanks to the creativity and...
Open the catalog to page 15What else can we offer you for your daily demands? Cable Test System Megger
Open the catalog to page 16DIGIPHONE+2 Pinpointing with magnetic-acoustic surge wave receiver PINPOINTING with optional SHEATH FAULT LOCATION and CABLE TRACING Additionally sheath fault location using voltage gradient method DIGIPHONE+2 NTRX SET Additionally cable tracing with detection of current direction Datasheet digiPHONE+ 2 Series CI/LCI Reliable cable identification of energised and de-energised cables CABLE IDENTIFICATION CI/LCI Datasheet MFM10 Battery operated sheath fault location system SHEATH FAULT LOCATION
Open the catalog to page 17All Megger Germany GmbH & SebaKMT catalogs and technical brochures
-
Correlux C-3
4 Pages
-
GT-3-NB-IoT
8 Pages
-
Sebalog D-3
4 Pages
-
SmartEAR
8 Pages
-
Netzwerk-Monitoring
12 Pages
-
POSEYEDON
12 Pages
-
SebaFlow
8 Pages
-
HL 7000
8 Pages
-
CI/LCI
8 Pages
-
PD SCAN
12 Pages
-
digiPHONE+2
8 Pages
-
CARLOC
4 Pages
-
FaultSniffer 2
4 Pages
-
HV DAC-200 / HV DAC-300
8 Pages
-
FERROLUX® SYSTEM
8 Pages
-
UHF PD detector
12 Pages
-
VLF SINE 62 (V3)
4 Pages
-
CENTRIX EVOLUTION
16 Pages
-
STX40
8 Pages