Netzwerk-Monitoring
12Pages

PERMANENT NETWORK MONITORING Actively reduce water losses

Permanent network monitoring Fresh water is crucial for life on earth and is a human right. Only 3% of the water on the earth is drinkable (97% is saltwater). The population is increasing continuously, and as human impact on nature increases, freshwater resources and the conservation thereof are vital for human life and for all life on Earth. According to the World Bank, only 65% to 85% of all water that is conveyed reaches the end consumer. The other 15% to 35% is lost within the water network during transportation. The main task of water utility companies is to provide continuous access...

What is the Permanent Remote Monitoring System (PRMS)? The Permanent Remote Monitoring System (PRMS) is an expandable monitoring system that provides water utility companies with a simple and effective way of monitoring the conditions within their distribution network. The system consists of measuring locations which can be attached to hydrants, gate valves, other fittings or directly to the pipeline itself, and cloud-based software that makes permanent online monitoring possible. Time-consuming visits to the individual measuring locations are no longer required thanks to automatic data...

Zone monitoring In order to monitor your drinking water network in the best possible way, it is advisable to divide the network into zones. These zones can now be monitored using ultrasonic flow rate measurement. SebaKMT has developed two options for this purpose: 1 – SebaFlow Classic SebaFlow makes continuous flow rate and zone monitoring of a pipe network section possible using ultrasonics. SebaFlow CLASSIC works completely independently of the material. This means that measuring or monitoring is possible on all types of pipe. The pre-existing infrastructure can be used for the power...

Advantages of the SebaFlow application Unlike other techniques, potential contamination and additional costs are prevented, since SebaFlow does not come into contact with the drinking water due to the use of ultrasonic technology with the “clamp-on method”. Another advantage of SebaFlow technology is the precise and reproducible measurements which you receive, particularly at the very low flow rates < 0.2 m/s which exist in the drinking water network of many water distributors. The sensor pairs are pre-calibrated in the factory, which both simplifies and speeds up commissioning. SebaFlow is...

Logger networks Now that the zones are monitored by ultrasonic flow rate measurement, we recommend examining other parameters within the individual zones. Two options are also available for this requirement. 1 – NB-IoT noise logger network The NB-IoT network records the minimum noise level and the associated frequency within a pipe section over a defined measuring period, and saves a noise file at the same time. Once or twice per day, your data is automatically transmitted to the POSEYEDON software via NB-IoT (see back page). A measuring location contains two devices, the N-3 Noise Logger...

A new feature of the GT-3 NB-IoT is the possibility of choosing between two preset measuring modes. For traditional leak detection, use night measurement or select permanent measurement for 24-hour monitoring at 15-minute intervals. Night measurement This is the mode that is pre-programmed in the factory. The logger becomes active between 2 o‘clock and 4 o‘clock during the night, and records the current noise with its microphone. The evaluation of the noise, and also the audio data if required, is transmitted to the POSEYEDON software at the set time period. New leakages can be detected...

2 – GT-3-1 Network With the GT-3-1 network, up to three devices (noise and pressure loggers) can be connected to the transmitter in parallel, which makes it very efficient when measuring several parameters at one measuring point. The GT-3-1 network also records the minimum noise level and the associated frequency within a pipe section over a defined measuring period, and saves a noise file at the same time. The following devices are available for pressure monitoring: Sebalog P-3-1 and P-3-Mini Sebalog P-3 pressure loggers are ideal for monitoring the pressure within drinking water...

The measuring devices in the GT-3-1 network can be programmed with the PocketServer PS-3 or with the LOG RI and LOG RI+ USB radio interfaces. PocketServer PS-3 The PocketServer is a compact digital interface which fits comfortably into your pocket. The PocketServer-3 allows the user to program the GSM transmitters of the GT series as well as the noise and pressure loggers as standard. The Pocket-Server-3 therefore follows in the footsteps of its predecessor, the Commander CDR-3. Any WiFi-enabled terminal device such as a Smartphone or tablet can be used to operate the PocketServer-3,...

Additional cloud-based solution for pressure and flow rate measurement Sebalog D-3 The D-3 reliably informs you of the status of the pressure and the flow rate in your supply network on up to 4 channels. The D-3 transmits the latest data to your control center automatically on a daily basis via GSM / GPRS / 3G or UMTS, or saves it in the specially developed POSEYEDON software. The D-3 supports online measurements on all channels, allowing you as the user to conveniently access saved measurement data and up-to-date readings at any time using your Smartphone. The alarm function notifies you...

POSEYEDON The cloud solution for leak detection and asset management that helps you to minimize water losses! Scan the QR code and watch the new POSEYEDON video All live data and evaluations are under control anytime, anywhere Easy to understand and clear user interface Stable, fast, secure and energy-efficient data transfer Automatic online correlation Continuous further development of functions (e.g. pattern recognition) Supports N-3, P-3-Mini, GT-3, D-3, SebaFlow SebaKMT Megger Germany GmbH · Dr.-Herbert-Iann-Str. 6 · D-96148 Baunach Tel. +49 9544 - 680 · Fax +49 9544 - 2273...