Hand Joysticks Series TRY81 ■ Up to 3 axes ■ Spring return, friction clutch optionally ■ Sealed up to IP63 ■ Multifunction handle for additional functions, e.g. switches, rockers, deadman paddle ■ Also available with USB- or CAN-Bus-Interface The TRY81 series derives from the TRY80 series, providing the same specifications regarding robustness, durability and precision. The handle can be individually configured with different kinds of pushbuttons, switches, rocker switches - even our TRY13 and TRY14 can be integrated. Sensor Supply Voltage Power Rating Reverse Polarity max. Overvoltage max. Output Impedance Resolution Independent Linearity Tolerance Return to Center Voltage (no Load) Output Voltages Hall Effect 5 VDC ±0.5 VDC transient free 10 mA per Axis -10 VDC 16 VDC 6 Ohm Infinite ±2% full scale ±200 mV initially 0 - 5 V / 0.5 - 4.5 V / 0.25 - 4.75 V / dual signals available Expected Life Mechanical Angle of Movement X & Y / Z Axis Break Out Force X & Y / Z Axis Operating Force X & Y / Z Axis Maximum Applied Force X & Y / Z Axis Environmental Sealing (above panel) Operating Temperature Storage Temperature EMC Immunity Level (V/M) EMC Emissions Level ESD 5 million cycles 38° (±19°) / 42° (±21°) 7,7 N / 0,6 Nm 14,0 N / 1,1 Nm 900 N, 20 cm above panel / 24,5 Nm up to IP63 (depending on handle configuration) -40°C to +85°C -40°C to +85°C IEC 61000-4-8:2009 IEC 61000-4-3:2006 IEC 61000-4-2:2008 Notes: 1. All values are nominal 2. Exact specifications may be subject to configuration MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Specifications are subject to change without

Hand Joysticks Series TRY81 Configuration Examples Oval Faceplate Configuration Examples Square Faceplate Technical Data Pushbuttons Max. Electrical Resistive Load Low Level Electrical Life Mechanical Life Environmental Sealing Action Operating Force Total Travel Available Button Colors 400 mA 32 VAC - 100 mA 50 VDC - 125 mA 125 VAC 10 mA at 30 mV 25000 cycles 5 A @ 28 VDC 1 million cycles up to IP67 Momentary, snap-action 7,5 N ±2 N 2 mm + 0,25 mm white, grey, black, red, orange, yellow, green, blue, purple Note: 1. Max. configuration of the handle takes up to 8 pushbuttons and 4 LEDs in the...

Hand Joysticks Series TRY81 Order Code Description Series Axes: 1 Axis 2 Axes 3 Axes Sealing: Rubber Boot Return Mechanism: Spring Return Limiters: Square Round X/Y „Plus“ 1 Axis X 1 Axis Y Handles: Handle with rectangular faceplate Handle with 2 Pushbuttons, rect. faceplate Handle with 4 Pushbuttons, rect. faceplate Handle with 8 Pushbuttons, rect. faceplate Handle with oval faceplate, customer-spec. Index Trigger: None With Trigger Output Options: 0 - 5 V single (inverse dual output) 0.5 - 4.5 V (inverse dual output) 0.25 - 4.75 V (inverse dual output) USB Joystick USB Mouse Emulation CAN J1939...

Data Sheet for JoysticksHand JoysticksTechnical Drawing MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 15.07.2019 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 4 of 5 Specifications are subject to change without notice

Data Sheet for JoysticksHand JoysticksMounting Drop-In Installation Wiring (analog output) Color Function Color Function Color Function BLACK Ground WHITE Pushb. Common RED/WHITE Trigger RED Supply Power ORANGE Pushbutton 1 LIGHTGREEN LED 12 BLUE X Axis PURPLE Pushbutton 2 LIGHTORANGE LED 13 YELLOW Y Axis GREY Pushbutton 3 GREY/WHITE LED 14 GREEN Z Axis BROWN Pushbutton 4 BLACK/WHITE LED 15 PINK Pushbutton 5 PURPLE/WHITE Deadman-Trg. 1. Standard cable length ca. 400 mm; Cable AWG 22 for Joystick functions, Switches, LEDs, etc. 2. Joysticks with USB interface or mouse emulation are supplied with...