Thumb Joystick Series TRY14 ■ Contactless Hall Sensors ■ Optionally with Pushbutton function in handle ■ Mounting option Threaded housing ■ Waterproof, IP class 68 (1 metre) / IP69K The TRY14 series offers proportional miniature-size thumb joysticks with Hall sensors for long durability and enduring signal quality. Signal output is available in different versions, like dual output or PWM output. The size of this joysticks can be compared with widely used gamepads, but integrated into an industrial-suited housing with a reliable mechanism. Typical applications range from remote controls, arm rest integration or integration into larger joystick handles to swivel arms. Sensor Power Supply Resolution Return to Center Voltage Tolerance Expected Life Output Signal Mechanical Angle of Movement X-Y-Axis Operation Force X-Y-Axis Max. Force applied vertical Max. Force applied horizontal Operating Temperature Storage Temperature Sealing Panel thickness Hall Effect 5 VDC ±0.5 VDC transient free 1.22 mV ±200 mV 1 million cycles 0 to 5 V / 0.5 to 4.5 V / 0.25 to 4.75 V / USB / PWM / further options see page 2 50° 3.1 N ± 0.5 N 200 N (on handle) 150 N (on handle) -40°C.. 85°C -40°C..+85°C IP68 / IP69K (sealing of panel opening excluded) max. 2.03 mm Electrical life Rating Terminal Contact resistance Insulation resistance Dielectric strength Contact arrangement Operation Force Stop strength Operating Temperature Storage Temperature Vibration resistance Shock resistance 100.000 cycles 50 mA, 12 VDC Brass with silver plating 100 mQ max. 100 MQ min. 500 VDC 250 VAC / 1 minute 1 pole 1 throw 6.7 N Max. 29.4 N vertical static load for 15 seconds -25°C to +70°C -30°C to +85°C MIL-STD-202F METHOD 201A MIL-STD-202F METHOD 213B MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Specifications are subject to change without not

Data Sheet for Joysticks Series TRY14 Thumb JoystickConnection Function Wire Color 111 Ground & Pushbutton Common Black Output X-Axis Blue Output X-Axis Dual Output Blue/White Output Y-Axis Yellow Output Y-Axis Dual Output Yellow/Black Pushbutton (Handle F) Orange Ground redundant Dual Output Black/White Supply redundant Dual Output Red/White TE Connector Dual Output 131 Pin 2 Pin 5 Pin 3 Pin 7 Pin 6 Pin 4 Pin 1 (1) Wire AWG22 or AWG28 (ref. to Order Description) (2) 5 position Connector TE 3-647166-5, pitch 2.54 mm (3) 7 position Connector TE 3-647166-7, pitch 2.54 mm MEGATRON Elektronik GmbH...

Thumb Joystick Series TRY14 Order Description Description Selection: standard=black/bold, possible options=grey/italics Mounting options: Rubber boot without bezel 5 Rubber boot, drop-in mounting 6 Rubber boot, below panel mounting 7 Metal threaded housing 8 Plastic threaded housing 9 Return mechanism: Spring return Handle F with pushbutton (not with output 2 & 4, and mounting option 9) F Handle G (not mounting option 8 & 9) G Handle H low profile (not mounting option 8 & 9) H Limiter: Square X-Y guided feel X-Y “Plus +“ Single axis X Single axis Y Output signal: 0..5,0 V (rail to rail) 1 Output...

Data Sheet for Joysticks Series TRY14 Thumb Joystick Technical Drawings Handles HANDLE A HANDLE F WITH PUSHBUTTON Handles G and H not compatible to Mounting option 8 „Threaded housing“ MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page:

Data Sheet for Joysticks Series TRY14 Thumb Joystick Technical Drawing DIMENSIONS METAL THREADED HOUSING 11.81 .47 Bottom view Top view LOCATING FLAT, Y+ PLASTIC THREADED HOUSING MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page:

Data Sheet for Joysticks Series TRY14 Thumb Joystick Technical Drawing MOUNTING CUTOUT PLASTIC HOUSING - DROP-IN (MOUNTING OPTION 6) => Installation depth below panel 16,02 mm Ø25.65 (1.01) DROP-IN BEZEL PLASTIC HOUSING - REAR MOUNT (MOUNTING OPTION 7) => Max. Panel Thickness 2,032 mm 4 x 1/2 FH SS PHIL SCREW CHAMFERED FOR #4 FLAT HEAD SCREW (4 PLACES) 1.00 (0.04) x 45º CHAMFER REAR MOUNT BEZEL THREADED HOUSING - DROP-IN (MOUNTING OPTIONS 8 & 9) => Installation depth below panel 14,55 mm => recommended torque 13,6 Nm 2X R1.6 .063 11.94 .470 MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse...