Finger Joystick Series TRY100 ■ Good cost/performance ratio ■ Shallow installation depth < 26 mm ■ Service-friendly due to connectors ■ Optional with redundant Hall sensors ■ Available interfaces include USB, CAN-bus J1939 and CANopen ■ Ideally suited for applications in CCTV, robotics, medical technology and audio/video productions The TRY100 is the all-rounder in the field of finger joysticks because of the extensive selection of handles, limiters and output options. It offers conventional handle designs as well as modern look & feel variants, in addition analogue outputs and digital interfaces. Thus the joysticks can be optimized for almost all possible applications. Sensor technology Hall Effect Supply Voltage* 5.0 ± 0.5 VDC transient free Voltage in Center Position* 2.5 V Return to Center Accuracy ±200 mV (valid for output voltage span of 0 to 5 V without load) Load Resistance Min. 1 kOhm, recommended > 100 kOhm Expected Life 5 million cycles Output Voltages* 0 to 5 V / 0.5 to 4.5 V / 0.25 to 4.75 V / for others see description on page 2 Supply Current typ. 40 mA / max. 50 mA (3 axes) Angle of Movement X-, Y-Axis / Z-Axis 36° (±18° from center) / 60° (±30° from center) Operating Force X-Y-Axis Handles 4, 6, 9, A, 7, 1, 3, 5: typ. 2.8 N / break out force 1.3 N / max. applied: 200 N Handles B, C, D, E: typ. 5 N / break out force 4 N / max. applied: 200 N Operating Torque Z-Axis 0.12 Nm / break out torque 0.09 Nm / max. applied: 2.5 Nm Max. vertical Load to Mechanism 200 N Operating / Storage Temperature -40 °C to +70 °C / -40 °C to +70 °C Above Panel Sealing Up to IP67 (depending on handle type) Panel Thickness 1.17 to 3.17 mm (max. 1.6 mm for rear mount option) EMC Immunity Level (V/M) EN61000-4-3, level 4 (30 V/m, 80 MHz ~ 2 GHz swept freq., 80% AM @1 kHz) ESD EN61000-4-2, level 3 (±6 kV contact, ±8 kV aerial discharge) *Only valid for the standard variants with analogue output. The output voltage is ratiometric to the input voltage. We therefore recommend using low-noise, stabilized voltage sources. 3 X-Axis Dual Output 5 Y-Axis Dual Output Colour grey (old: green/black) green orange white violet n.c. black 7 Z-Axis Dual Output pink (old: blue/white) 9 Pushbutton 1 blue 10 Pushbutton 1/2 Common brown (old: yellow/black) 11 Pushbutton 2 MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 11.02.2021 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 1 von 10 Specifications are subject to change with

Finger Joystick Series TRY100 Please contact us for information regarding stock articles, delivery times and minimum order quantities. Order Description / Options Description Selection: standard=black/bold, possible options=grey/italics Handle 6, for 3 axes, low profile, w/o pushbutton, IP55 6 Handle A, for 3 axes, 2 pushbuttons, IP55 A Handle E, for 3 axes, 2 pushbuttons, IP67 E Handle 7, for 3 axes, w/o pushbutton, IP55 7 Handle 1, tapered (not compatible to mounting 2), IP67 1 Handle B, for 3 axes, w/o pushbutton, IP67 B Handle C, for 3 axes, 1 pushbutton, IP67 C Handle D, for 3 axes, 2 pushbuttons,...

Data Sheet for JoysticksFinger Joystick For higher quantities or on-going demand, additional options are available For example: ■ Redundant output signals (inverted or parallel) ■ Increased return-to-center spring tension ■ Voltage regulator ■ Customer-specific cables ■ Different baud rates for CANOpen Square guided feel“ (1) Round guided feel“ (1) (1) “guided feel“ still allows the joystick handle to be deflected omni-directionally, but as the operation force needed for the main axes is slightly below the force needed for diagonal deflection the resulting impression is that of a „guided movement"....

Data Sheet for Joysticks Series TRY100 Finger Joystick Technische Zeichnung Handle versions Drop-In mounting only MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page:

Data Sheet for Joysticks Series TRY100 Finger Joystick Handle versions All dimensions in mm (inches) MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page:

Data Sheet for Joysticks Series TRY100 Finger Joystick Handle versions All dimensions in mm (inches) MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page:

Data Sheet for Joysticks Series TRY100 Finger Joystick Handle versions Drop-In mounting only All dimensions in mm (inches) MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page:

Data Sheet for Joysticks Series TRY100 Finger Joystick Mounting Options Rear Mount Brass insert 4 places Brass insert 4 places – Panel – Gasket – Rear Mount Gasket (*) (2) Below-panel depth is extended by 7.11 mm with USB, voltage regulator, dual decode, center detect options. 4 pcs of mounting screws supplied with each joystick. Drop-In Option „Housing 1“ Ø41.28 (1.625) Rear Mount MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without...

Data Sheet for Joysticks Series TRY100 Finger JoystickTechnical data CAN Bus version Supply voltage Current consumption Reverse connection protected Short-circuit protected against +UB max. Short-circuit protected against GND CAN bus standards Protocols Baud rate* CAN ID formats BJM/EJM cycle time Terminating resistor Operating / Storage Temperature 6 V to 35 V Typical: 35 mA @12 V, 18 mA @24 V, 15 mA @30 V Yes Yes Yes ISO 11898, CAN specification 2.0A/2.0B CANJ1939, CANJ1939-71, CANopen* 125 kbit/s, 250 kbit/s, 500 kbit/s, 1 Mbit/s 11 bit (CAN 2.0A) / 29 bit (CAN 2.0B) 50 ms (standard; 15 ms...