Optical incremental Encoder Series SPE ■ Optical resolution up to 1000 pulses per revolution ■ 22 mm housing diameter ■ 11,7 mm housing depth ■ Shaft diameters: 6 mm, 6.35 mm, 3.175 mm ■ Ball or sleeve bearing ■ Supply voltage 5 VDC ■ Signal Output TTL ■ Molex Connector Compact optical incremental encoder with possibility of choice between three different operating torques. With increased torque option the SPE could be also used as a high quality optical panel encoder. Mechanical and Environmental Data, Miscellaneous Mechanical angle of rotation /stroke 1.) Lifetime 2.) Bearing Max. operational speed Sleeve bearing Ball bearing Max. acceleration Sleeve bearing Ball bearing Operational torque @ RT 1.) 2.) Sleeve bearing with low torque (Version NT) Sleeve bearing with increased torque Ball bearing with very low torque (Version KL) Operating temperature range Storage temperature range Protection grade shaft side (IEC 60529) standard 360° without stop > 1 Mio. shaft revolutions for sleeve bearing Sleeve bearing or ball bearing 100 rev./min 15000 rev./min 10000 rad/sec2 250000 rad/sec2 0.2 Ncm 0.4 ±0,1 Ncm 0.01 Ncm -20..+100 °C -20..+100 °C IP40 MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 05/20/2019 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 1 of 4 Errors and specifications subject to change without no

Data Sheet for Angle Sensors Series SPE Optical incremental EncoderMechanical and Environmental Data, Miscellaneous Vibration (IEC 68-2-6, Test Fc) Shock (IEC 68-2-27, Test Ea) Housing diameter / length Housing depth Shaft diameter Shaft type Max. radial load Max. shaft load Connection type Connection position Sensor mounting Mass Fastening parts included in delivery Fastening torque mounting nut Material shaft Material housing Material disc Immunity ESD, human body model (MIL-STD-883, Method 3015.8) 20 g / 20 bis 2000 Hz / sine waveform 75 g / 6 ms / halfsine 22 mm 11.73 mm 6 mm, 6.35 mm, 3.175...

Data Sheet for Angle SensorsOptical incremental Encoder Order code Requirement: Shaft diameter 6 mm, resolution 100 pulses per revolution , supply voltage 5 V, 2 channels A+B, output electronics TTL, sleeve bearing with increased torque 0.4 ±0.1 Ncm Example for order code: SPE 6 100 5 B TTL MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Errors and specifications subject to change without notice

Data Sheet for Angle SensorsOptical incremental Encoder For higher quantities or on-going demand, additional options are available as described below For example: ■ Special shaft ■ Other operational torques ■ Special connector and cable design Technical Drawing NUI (INCLUDED) Cl 5 A H7 g6 -STAR WASHER (INCLUDED) Matting Connector: Housing: Molex# 51021-0400 Pins: Molex # 50079-8100 Accessory not included in delivery: Matting connector with 500 mm AWG28 leads Matting Connector: Housing: Molex# 51021-0600 Pins: Molex # 50079-8100 Connection diagram Output waveform MEGATRON Elektronik GmbH & Co....