Optoelectronic Panel Encoder Series MRX50 ■ Compact design, ideal for small installation spaces ■ Resolution 50 pulses per revolution ■ Lifespan more than 1 mio. shaft revolutions ■ IP protection grade from shaft side until IP65 ■ Various electrical connection variants ■ Supply voltage 5 V or 3,3 V The sum of the properties makes the MRX50 particularly interesting for use in control panels, where a limited installation space, a finely graduated value-setting coupled with a long product life, is required. Based on an optional shaft sealing this manual encoder is also suitable for applications with increased environmental requirements. Output signal Number of pulses Output voltage high Output voltage low Limit frequency Supply voltage Power consumption (no load) Insulation voltage 1.) Insulation resistance 1.) Output electronics Switch-on delay A, B 50 pulses per rev. > (supply voltage -0.5V) < 0.5V 100 Hz 5 V ±5%, (3.3 V ±5%) < 30 mA Housing: 500VDC, 1 min. Switch: 100 VDC, 1 min. Housing: 100MOhm @ 500VDC Switch: 100MOhm @ 250VDC TTL <340ns Data Sensor with detent with detent and switch 360° without stop 50 (50 pulses per rev.) > 1 Mio. shaft revolutions Sleeve bearing 0.4 ±0.2 Ncm 0.8 ±0.2 Ncm -20..+60 °C -20..+80 °C IP40 IP65 Mechanical angle of rotation /stroke 1.) Number of detents per revolution Lifespan 2.) Bearing Operational torque / detent torque: With detent standard torque With detent high torque Operating temperature range Storage temperature range Protection grade shaft (IEC 60529) With shaft sealing option D (only from shaft side) MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 03/29/2021 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 1 of 4 Errors and specifications subject to change without noti

Optoelectronic Panel Encoder Series MRX50 Mechanical and Environmental MRXC50 MRXCT50 Data Sensor with detent with detent and switch Housing diameter / length Housing depth Shaft diameter Shaft type Connection type Connection position Sensor mounting Mass Fastening parts included in delivery Fastening torque mounting nut Material shaft Material housing Material disc 25 x 25 mm 10 mm 6 mm Solid shaft Solder lugs, socket for plug, flat band cable with soldering aid (plug) Radial Bushing app. 25 g Hex nut (AF11), flat washer and tooth washer For option D with additional sealing ring < 80Ncm Brass...

Optoelectronic Panel Encoder Series MRX50 Order Code For higher quantities or on-going demand, additional options are available as described below For example: ■ Other resolutions ■ Other number of detents ■ Customized detent torque ■ Special shaft design ■ Special cable and connection design MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Errors and specifications subject to change without notice

Data Sheet for Panel EncodersOptoelectronic Panel Encoder Drawing MRX..V7 Push Switch shaft No-Rotation Encoder shaft °a|L Output circuit 1 : Red 2 : Green 3 : White 4: Black 5 : Purple 6: Yellow Mounting hole dimensions MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 03/29/2021 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 4 of 4 Errors and specifications subject to change without notice