Optoelectronic Panel Encoder Series MRS ■ Compact design, ideal for small installation spaces ■ Various electrical connection variants ■ Resolution 4, 6 or 8 pulses per revolution ■ IP protection grade from shaft side until IP65 ■ With our without detent, push button switch ■ Supply voltage 5V or 3,3V Thanks to the quality of MRS, the variety of variants and the compact housing dimensions - MRS is a perfect choice as panel encoder for low end applications. The finely tuned selection of the components is the guarantee for a pleasant haptic, a long lifespan also in applications with increased environmental requirements. Electrical Data Sensor Output signal Number of pulses Output voltage high Output voltage low Limit frequency Supply voltage Power consumption (no load) Insulation voltage 1.) Insulation resistance 1.) Output electronics Switch-on delay A, B 4, 6 or 8 pulses per rev. Please note that the number of pulses does not correspond to the number of detents > (supply voltage -0.5V) < 0.5V 100 Hz 5 V ±5% 3,3 V ±4% 250 VAC, 1 min 100 MOhm @ 250 VDC Open Collector (Pull-Up-Resistance > 10kOhm) max. 2us Mechanical and Environmental Data Sensor Mechanical angle of rotation /stroke 1.) Number of detents per revolution Lifespan 2.) Bearing Operational torque / detent torque: Without detent With detent With detent with increased torque 360° without stop 16 (4 pulses per revolution), 24 (6 pulses per revolution), 32 (8 pulses per revolution) > 1 Mio. shaft revolutions Sleeve bearing < 0.2 Ncm 0.4 ±0.2 Ncm 1.1 ±0.5 Ncm Operating temperature range Storage temperature range Protection grade shaft (IEC 60529) IP40 With shaft sealing option D (only from shaft side) IP65 MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Errors and specifications subject to change without notice

Optoelectronic Panel Encoder Series MRS Mechanical and Environmental Data Sensor Housing diameter / length Housing depth Shaft diameter Shaft type Max. radial load Max. axial load Connection type Connection position Sensor mounting Mass Fastening parts included in delivery Fastening torque mounting nut Material shaft Material housing Material disc 15 x 16 mm 8,5 mm 6 mm (option 6,35mm) Solid shaft < 10 N < 15 N Solder lugs, solder pin's, flat band cable with soldering aid (plug), foil flatband cable Radial Bushing app. 11 g Hex nut (AF11), flat washer and tooth washer For option D with additional...

Data Sheet for Panel EncodersOptoelectronic Panel EncoderOrder Code Description Series Shaft: 0 6 x 17,5 mm 0 6,35 x 17,5 mm Option shaft length in mm Option shaft diameter in mm (<6,35 mm) Detent: Standard with detent without push button switch Option without detent Push button switch: Standard without push button switch Standard with push button switch Pulses per revolution: Standard 8 pulses (32 detents) per revolution Option 6 pulses (24 detents) per revolution Option 4 (16 detents) pulses per revolution Supply voltage: Standard 5 V Option 3,3 V Standard output signal: A+B Shaft sealing:...

Data Sheet for Panel Encoders Series MRS Optoelectronic Panel Encoder Dimensions Drawing ●With Push Switch 15 14 3.9 Mounting hole dimensions 9. ●Without Push Switch 15 14 3.9 Push switch if present Push switch if present Supply voltage STONEWELLS CORPORATION MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Errors and specifications subject to change without notice Mounting hole dimensions

P.W.B.mounting hole dimensions (±0.05) P.W.B.mounting hole dimensions (±0.05) B:100mm cable with connector Drawing Technische Zeichnung Termination(mm) Option V1: 3.5 C:Leadframe Optoelectronic Panel 100 Data Sheet for Panel Encoders 2 2 P.W.B.mounting hole dimensions (±0.05) P.W.B.mounting hole dimensions (±0.05) Mounting board MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Errors and specifications subject to change without notice 1.5 6.8 P.W.B.mounting hole dimensions...

Data Sheet for Panel Encoders cable with connector 6 B:100mm cable with connector 6 P.W.B.mounting hole dimensions (±0.05) 100 P.W.B.mounting hole dimensions (±0.05) Drawing Technische Zeichnung P.W.B.mounting hole dimensions (±0.05) P.W.B.mounting hole dimensions (±0.05) 14.3 2 6-φ0.7 6 2 6-φ0.7 MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 10 ▪ 85640 Putzbrunn / Munich 7 6 Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] 10 Errors and specifications subject to change without notice

Data Sheet for Panel Encoders Optoelectronic Panel Encoder iinonr ^^Positior Output *The code repeats froml to 4. Max. recommended depth of mounting plate for panel mounting is 4mm. MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 03/12/2019 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 7 of 7 Errors and specifications subject to change without notice