Data Sheet for Angle SensorsHall-Effect Single-Turn Rotary Encoder Series MP1627 ■ Very large operating temperature range -40..125°C ■ Flange- or bushing mounting ■ Optional redundant electronics ■ 027 mm housing ■ 18.1 mm housing depth ■ 06 mm shaft ■ 5 V, 12 V or 24 V supply voltage ■ 300 mm signal cable length ■ IP65 ■ Sleeve bearing The MP1627 series is particularly suitable where a very large operating temperature range is required. Due to the choice of flange or bushing mounting, the rotary encoder is compatible with a variety of installation situations. The low installation depth completes the positive overall impression. Effective electrical angle of rotation 1.) Independent linearity (best straight line) 1.) Output signal Resolution 1.) Update rate Supply voltage Power consumption (no load) Output load Insulation voltage Insulation resistance 1.) 360° ±0.5 % @VSUP 5 V Output voltage: 10 % ±3 %..90 % ±3 % ratiometric @VSUP 24 V or 12 V Output voltage 10 % ±3 %..90 % ±3 % 12 Bit (4096 steps) 800 |js 5 VDC ±0.5 V 12 VDC ±0.5 V 24 VDC ±0.5 V < 16 mA (single) < 32 mA (redundant) > 10 kQ ±8 kV contact discharge, ±16 kV aerial discharge (IEC 61000-4-2) >1000 MQ @ 500 VDC Mechanical angle of rotation 1.) Lifetime 2.) Max. operational speed Bearing Operational torque @ RT 1.) 2.) Operating temperature range Storage temperature range Protection grade (IEC 60529) Vibration (IEC 68-2-6, Test Fc) Shock (IEC 68-2-27, Test Ea) Housing diameter Housing depth Shaft diameter Shaft type 360° without stop 50 mio. shaft revolutions 400 rev. / min. Sleeve Bearing < 5 Nmm -40..+120 °C -40..+120 °C IP65 (option IP67) 10..2000 Hz 196 m/s2 12 hours 980 m/s2 6 ms (18 times) 27 mm 18 mm 6 mm Solid shaft MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 05/15/2019 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 1 of 6

Max. allowed radial load Max. allowed axial load Connection type Connection position Sensor mounting Mass Fastening parts included in delivery Fastening torque mounting nut Material shaft Material housing <1 N <1 N Single strands 300 mm ±20 mm Axial Bushing or flange mounting app. 45 g Hex nut, tooth washer < 150 Ncm Stainless steel Plastic 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■...

Data Sheet for Angle SensorsHall-Effect Single-Turn Rotary EncoderOrder code (non redundant version) Description Series: Mounting type / design: Bushing only Flange and Bushing Shaft diameter / shaft length: 0 6.00 mm x 25.2 mm Option: user defined shaft [mm] (Shaft diameters > 6.00 mm are designed as two part shaft) Supply voltage / output signal: VSUP=5 V ±10 % / output voltage: 10 % ±3%..90 % ±3 % from VSUP (ratiometric) Option: VSUP 12 V±0.5 V Output voltage: 1,2 V ±0.36 V..10.8 V±0.36 V Option: VSUP 24 V±0.5 V Output voltage: 2,4 V ±0.72 V..21.6 V±0.72 V Sense of rotation output signal:...

Data Sheet for Angle SensorsHall-Effect Single-Turn Rotary EncoderOrder example (redundant version) Description Series: Mounting type / design: Bushing only Flange and Bushing Redundant electronic: Galvanically insulated electronic voltages, 2 separate grounds, =6 electrical connection cables [VSUP1, VSUP2, Ground 1, Ground 2, Out 1, Out 2 ) Galvanically not insulated electronics one ground, =4 electrical connection cables [IxVSUP, IxGround, Out 1, Out2]) Shaft diameter / shaft length: 0 6.00 mm x 25.2 mm Option: user defined shaft [mm] Supply voltage / output signal: VSUP=5 V ±10 % / output...

Note: 1. 1 pc. each of inner teeth washer and hex nut is attached. 2. Please duly note that inner construction may burn out when applying the voltage to the wrong terminals except input terminal. Hall-Effect Single-Turn Rotary Encoder Exposure at High Temperature Rotational Life Expectancy Flange Version Flangue Version ● Environmental Specif ications Thermal Shock Technical Drawing 3 Lead wires (AEX 0.5SQ) of abt.300 mm / (4 wires in case of dual output) / (6 wires in case of dual independent output) 100V/m(80MHz～1GHz 1kHz Sinwave80% Amplitude Modulation) Version Bushing Version Bushing ±8kV...

Terminal Connection Diagram Dual Independent output Single output Data Sheet for Angle Sensors Dual output Hall-Effect Single-Turn Rotary Encoder Output Characteristics OUT A OUT B (In case of a parallel output) 360 OUT B (In case of a crossing output) MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date: Page: