Optical Encoders Series MOT5 ■ Ultra compact high-end encoder in top quality ■ Only 5mm housing diameter ■ 64 or 100 pulses per revolution ■ 2 channels + index ■ Ball bearing ■ Supply voltage 3.2 ±0.1V ■ Voltage output The unique characteristic of the MOT5 is its almost unbeatable small housing size, in terms of the used technology of a contactless optical incremental encoder. Due to its price structure, the MOT5 is reserved for special applications in which the currently technically feasible in miniaturization and product quality are required. Output Signal Number of pulses Output high voltage @ IOH Output low voltage @ IOL Limit Frequency Supply voltage Power consumption (no load) Output load Max. pull-up voltage Output electronics Switch-on delay A, B, Z (Index) Resolution (pulses per rev.) 64, 100 > VSUP -0.3V (when IOH = -1mA) < 0.3 V (when IOL= +1mA) 100 kHz 3.2 VDC ±0.1 V < 15 mA IOL = +8mA, IOH = -2mA < 3.3V Voltage output (NPN) max. 2 |js Mechanical angle of rotation /stroke 1.) Bearing Max. operational speed Operational torque @ RT 1.) 2.) Operating temperature range Storage temperature range Protection grade (IEC 60529) Vibration (IEC 68-2-6, Test Fc) Shock (IEC 68-2-27, Test Ea) 360° without stop Ball bearing 6000 rpm. < 0.1 Ncm 0..+60 °C -20..+80 °C IP40 55 Hz; 1.5 mm; each 2 h in X, Y, Z (50 G) 500 m/s2, each 3 times in X, Y, Z MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Specifications are subject to change without notice

Optical Encoders Series MOT5 Mechanical Data and Environmental Data Housing diameter / length Housing depth Shaft diameter Shaft type Max. radial load Max. axial load Connection type Connection position Sensor mounting Mass Fastening parts included in delivery Fastening torque mounting nut Material shaft Material housing Material disc 5 mm 7.1 mm 1.5 mm Solid shaft 0.98 N 0.98 N Foil flatbandcable app. 150 mm with FPC-Connector IL-FPR-6S-HF-N1 incl. PCB with connector Axial Bushing app. 5g (incl. cable) Hex nut AF6 < 1 Nm Stainless steel Aluminium Nickel 1.) According IEC 60393 2.) Determined...

Optical Encoders Series MOT5 Order Code Requirement: 64 pulses per revolution, supply voltage 3.2V, 2 channels + index, output electronics voltage output, electrical connection FPC-Connector with 150 mm signal cable Example for order code: MOT5 64 3.2 BZ NPN For higher quantities or on-going demand, additional options are available as described below For example: ■ Other resolutions ■ Specials shaft design ■ Special connector and cable design MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■...

Data Sheet for Angle Sensors Series MOT5 Optical Encoders Drawing Exposed conductor surface Connector for matching FPC connection Japan Aviation Electronics Industry IL-FPR-6S-HF-N1 M4 thread（fine thread） Lock nut（included） details 5.8 Black silicon seal 20° 20° M4×P0.5 （fine thread） Reinforcing plate Exposed conductor surface Output waveform CW rotation（CW rotation as seen from fit surface） Terminal board（included） details Signal name Wiring chart Connector: Japan Aviation Electronics Industry IL-FPR-6S-HF-N1 ＊The position of Z phase against  A, B phase is not specified. Output circuit diagram ＋Vcc（DC3.2V±0.1V）...