Optical incremental Encoder Series MOM18 ■ Compact high quality encoder ■ Only 18 mm housing diameter and 15.5 mm housing depth ■ 2,5 mm shaft diameter ■ Ball bearing ■ Up to 1600 pulses per revolution ■ 2 channels with reference impulse ■ Open collector or line driver electronics ■ Supply voltage 5 V (5...12 V Open Collector) ■ Incl. signal cable with HIROSE connector ex works The MOM18 attracts attention due to its first class and compact design and the powerful price structure. This makes it ideal for applications with demands to a high-quality design in combinations with often tight cost structures. The choice of optical resolutions >1000 pulses per revolution and the signal cable with HIROSE connector ex works round off the powerful overall picture. Electrical Data Open Collector Line Driver Output signal Number of pulses Output voltage high Output voltage low Limit frequency Supply voltage Power consumption (no load) Output capacity Max. pull-up voltage Insulation voltage 1.) Insulation resistance 1.) Output electronics Switch-on delay Mechanical and Environmental Data, Miscellaneous Mechanical angle of rotation /stroke 1.) Bearing Max. operational speed Shaft acceleration Moment of inertia Operational torque @ ambient temperature 1.) 2.) Operating temperature range Storage temperature range Protection grade standard (IEC 60529) Vibration (IEC 68-2-6, Test Fc) Shock (IEC 68-2-27, Test Ea) 360° without stop Ball bearing 6000 rpm. 1x10-5 rad/s2 1x10-8 Kg • m2 < 0.49 Nmm -10..+85 °C -30..+85 °C IP50 10 bis 55 Hz / 1.5 mm X, Y, Z each 2h 490m/s2, 11 mm X, Y, Z each 3 times MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 08/30/2018 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 1 of 4 Errors and specifications subject to change without notice

Housing diameter Housing depth Shaft diameter Shaft type Max. radial load Max. axial load Connection type Connection position Sensor mounting Mass Fastening parts included in delivery Material shaft Material housing Material disc Immunity ESD, human body model (MIL-STD-883, Method 3015.8) 18 mm 15.5 mm 2.5 mm Solid shaft < 2.94 N < 4.9 N Flatband cable with HIROSE connector Axial (optional radial) Thread screws M2, deep 4 app. 20 g None Stainless steel Zinc alloy (ZDC2) Metal ±4 kV (contact) ±8 kV (air) 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para....

Data Sheet for Angle SensorsOptical incremental Encoder Order Code Requirement: Shaft diameter 2,5 mm, shaft length 7 mm, 1600 pulses per revolution, supply voltage 4,5...13,2 V, 2 channels + index, open collector electronic, flatband cable with HIROSE connector Example for order coder: MOM 18 1600 513 BZ K For higher quantities or on-going demand, additional options are available as described below For example: ■ Other resolutions ■ Specials shaft design ■ Special connector and cable design ■ Other operational torque MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn...

Data Sheet for Angle Sensors Series MOM18 Optical incremental Encoder Technical Drawing Connector Hirose Electric Co., Ltd. DF3-5S-2C SigZ SigZ P=1 /Resolution Line driver output is available for only A, B, Z signal. Signal A,B a,b,c,d= (P/4)±(P/8) Duty = (P/2)±(P/4) Signal Z (P/4) < h< (3P/4) MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Errors and specifications subject to change without notice