Optical Encoders Series MOL40 ■ Optical resolution 10 to 5000 pulses per revolution ■ Metal housing, ball bearing ■ 40 mm housing diameter ■ 6 or 8 mm shaft diameter ■ Output: NPN, Open Collector, Linedriver, Push Pull ■ 2 m signal cable ■ Shaft coupling included in delivery The robust encoder design of the MOL40 series is particularly suitable where high operational shaft speeds and a long service life are required. The MOL40 is established on the market for many years in hundreds of applications and is a guarantor of high reliability. The linedriver option provides a reliable measurement value transmission over long distances between encoder and evaluation unit. MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Errors and specifications subject to change without notice

Data Sheet for Angle SensorsOptical Encoders Series MOL40Mechanical and Environmental Data, Miscellaneous Mechanical angle of rotation/stroke 1.) Bearing Max. operational speed Operational torque @ RT 1.) 2.) 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 01/27/2021 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 2 of 5 Errors and specifications subject to change without notice

Data Sheet for Angle SensorsOptical Encoders Order Code Requirement: Shaft diameter 6 mm, resolution 360 pulses per revolution , supply voltage 5 V, 2 channels A+B and Index, output electronics Push Pull, 2 m signal cable length Example for order code: MOL40 6 360 5 BZ B For higher quantities or on-going demand, additional options are available as described below For example: ■ Other resolutions ■ Special cable length ■ Modified shaft shape ■ Special cable and connector design MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 01/27/2021 Tel.: +49 89...

Data Sheet for Angle SensorsOptical EncodersTechnical Drawing > 06 Coupling 015 06T 2.8 Totem pole output / NPN open collector output / Voltage output Black: OUT A White: OUT B Orange: OUT Z Brown: +V (5VDC, 12-24VDC ±5%) Blue: GND (0V) Shield: F.G. Unused wires must be insulated. The metal case and shield wire of encoder should be grounded (F.G.). Totem pole output / Line driver outputNPN open collector output / Voltage output Line driver output Black: OUTA Red: OUT A White: OUT B Gray: OUT B Orange: OUT Z Yellow: OUT Z Brown: +V (5VDC, 12-24VDC ±5%) Blue: GND (0V) Shield: F.G. Totem pole output/...

Data Sheet for Angle Sensors Series MOL40 Optical Encoders Output Diagram Push Pull output - Option: B Totem pole output Open open collector output NPN Collector output - Option: K Voltage output - Option: NPN output Linedriver output - Option: N Line driver output Rotary encoder circuit Load connection Rotary encoder circuit Load connection Rotary encoder circuit Load connection Output Source current : Max. 10mA 0V Load Output Output Load Main circuit Main circuit Main circuit Rotary encoder circuit Load connection Totem pole output type can be used for NPN open collector output type ( _ or...