Optoelectronic Panel Encoder Series MHU ■ Valuable, compact handwheel ■ Diameter knob 46 mm / housing 60 mm ■ Installation depth only 10 mm ■ Knob with metal inlet for a premium haptic ■ 100 mechanical detents ■ 5 V supply voltage ■ Voltage output or linedriver ■ Installation on the operation panel by means of 3 x M3 threaded bolts with union nuts ■ Electrical connection via M3 screw terminals ■ Also available as IP64 version The high-quality handwheel MHU with mechanical detent has a rotary knob with built in metal inlet. Due to the high weight of the knob and the inertia of the mass whilst fast rotary movements an overtwist is ensured. This overtwist allows a quick change of values. Due to the low installation depth of only 10 mm and the choice between 4 different output electronics, a high compatibility to many applications is given. Voltage Outputs Output signal Number of pulses Output voltage high Output voltage low Limit frequency Supply voltage Power consumption (no load) Output capacity Insulation voltage 1.) Insulation resistance 1.) Output electronics Switch-on delay A, B 25 pulses per rev. 5 V ±10% < 0,5 V 5 kHz 12 V ±10% < 50 mA 20 mA 1 kV/AC, 1 min 50 MOhm @ 500 VDC Voltage output max. 1 |js max. 1.5 js Mechanical and Environmental Data, Miscellaneous Mechanical angle of rotation /stroke 1.) Number of detents per rev. Lifetime 2.) Bearing Starting torque / Detent torque Operating temperature range Storage temperature range Protection grade front side (IEC 60529) Standard Vibration (IEC 68-2-6, Test Fc) Shock (IEC 68-2-27, Test Ea) 360° without stop 100 (@ 25 or 100 pulses per rev.) > 1 mio. shaft revolutions Sleeve bearing 3.9 ±1 Ncm -10..+60 °C -20..+70 °C IP64 10-55 Hz; 1.5 mm 2h each direction 50 g (11 ms, halfsine) MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 03/01/2021 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 1 of 4 Errors and specifications subject to change wit

Data Sheet for Panel EncodersOptoelectronic Panel Encoder Series MHUMechanical and Environmental Data, Miscellaneous Housing diameter / length 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 03/01/2021 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 2 of 4 Errors and specifications subject to change without notice

Data Sheet for Panel EncodersOptoelectronic Panel Encoder Order Code Requirement: 100 pulses per revolution, supply voltage 5 V ±5%, 2 channels, linedriver output electronics, without shaft sealing IP40, housing colour knob black Example for order coder: MHU 100 5 B N IP Schwarz For higher quantities or on-going demand, additional options are available as described below For example: ■ Other resolutions ■ Other amount of detents ■ Customer specific detent torque MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201...

Data Sheet for Panel Encoders Series MHU Optoelectronic Panel Encoder Technical Drawing Voltage Output Mounting surface M3 × 4 Above size only 3 x M3 Stud PCD53 At equal pitch. Line Driver Output 3 x M3 Stud PCD53 At equal pitch. M3 × 4 6. 2 Above size only Electrical Connections Output Circuit: Voltage Output Linedriver Wave Form Output Circuit: Linedriver Voltage Output MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Errors and specifications subject to change without notice...