MHP24
3Pages

Catalog excerpts

Conductive Plastic Hollow Shaft Potentiometer Series MHP24 ■ Space saving flat housing (024 x 7.1mm) ■ Simple mounting on flatted hollow shaft hub and anti rotation pin ■ Conductive plastic and high-quality multi finger wiper (precious metals) gives a reliable signal output The conductive plastic hollow shaft potentiometer MHP24 allows based on the flatted hub and the anti rotation pin an easy and exact zero point alignment. The flat construction allows the implementation under constricted rooms. Electrical Data Effective electrical angle of rotation 1.) Total resistance 1.) Resistance tolerance Independent linearity (best straight line) 1.) Theoretical resolution 1.) Backlash (Hysteresis) 1.) Max. / recommended wiper current 1.) Power rating @ 70°C (0W @ 105°C) Insulation Voltage 1.) Insulation Resistance 1.) Mechanical Data, Environmental Conditions, Miscellaneous Mechanical angle of rotation Lifetime (90% el. eff. angle half sine) 2.) Max. operational speed Bearing Operational torque @ ambient temperature 1.) 2. Operating temperature range Storage temperature range Protection grade (IEC 60529) Housing diameter Housing depth Shaft diameter Shaft type Connection type Connection position Sensor mounting Mass Material hollow shaft hub Material housing 360° without stop 2 Mio. rotations 90 rev. / min. Sleeve bearing 5 Nmm -40..+105°C -40..+105°C IP40 24 mm 7,1 mm 6 mm Hollow shaft Gold plated solder pad Radial Anti rotation pin 5 g Plastic Plastic 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives Please note: Max. permissible supply voltage <75 VDC respectively <50 VAC in addition the max. power rating must be observed MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 12/01/2020 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ info@megatron.de Page: 1 of 3 Specifications are subject to change without notice

Open the catalog to page 1

Data Sheet for Precision PotentiometerConductive Plastic Hollow Shaft Potentiometer Series MHP24 Order code For higher quantities or on-going demand, additional options are available as described below For example: ■ Other electrical rotation angles or resistance values ■ Special tolerances of independent linearity ■ Custom specific housings MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ info@megatron.de Specifications are subject to change without notice

Open the catalog to page 2

Data Sheet for Precision Potentiometer Series MHP24 Conductive Plastic Hollow Shaft Potentiometer Drawing The wiper tip is on the center of the track when mark A is aligned with mark B. The output must be app. 50% of applied voltage Fixation of the anti rotation pin has to be without any load MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ info@megatron.de Specifications are subject to change without notice Detail A: Anti rotation pin Date: Page:

Open the catalog to page 3

MHP24 3Pages

Catalog excerpts

All MEGATRON Elektronik GmbH & Co. KG catalogs and technical brochures

MHP24
3Pages