Potentiometric Linear Transducer Series MBX ■ Measurement stroke 50..200 mm ■ Flat design (Height < 7 mm) ■ Short length (No push rod needed) ■ Infinite resolution (Conductive plastic potentiometer) ■ Absolute measurement signal without processing delay Because of the low profile design and the compact wiper carrier part (no push rod is needed) this sensor gives the best opportunity for integration into space saving applications. Caused by the potentiometric measurement principle that needs no signal processing electronics, the absolute measurement signal is immediately available after power on and without delay and infinite resolution meanwhile operation. Mechanical Data, Environmental Conditions, Miscellaneous Mechanical Stroke 1.) Lifetime (90% el. effective stroke) 2.) Bearing Max. operational speed Starting force @ ambient temperature 1.) 2.) Operating temperature range Storage temperature range Protection grade (IEC60529) Vibration (IEC 68-2-6, Test Fc) Shock (IEC 68-2-27, Test Ea) Housing length Mass ca. Fastening parts (not included in delivery) Material groove / slider Connection type Aluminium / engineering plastic Single leads AWG22 ca. 175 mm 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives Please note: Max. permissible supply voltage <75 VDC respectively <50 VAC in addition the max. power rating must be observed MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 07/25/2019 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 1 of 3 Specifications are subject to change wi

Data Sheet for Linear SensorsPotentiometric Linear Transducer Order Code For higher quantities or on-going demand, additional options are available as described below For example: ■ Special electrical effective strokes like 300 mm ■ Special mechanical modification of the aluminium groove (special mounting holes or groove length) ■ Customized lead assembles with/without connector ■ Special aluminium groove to fit in the customer application ■ Modifications of the wiper carrier part General handling guidelines: To ensure proper potentiometer function, requirements as listed below have to be maintained...

Data Sheet for Linear Sensors Series MBX Potentiometric Linear Transducer 3+1mm dismantled. and tinned (leadfree) stranded wire size AWG22 isolation UL-PVC The leads have to be fastened about 40 mm distance to the profile especially in case of vibration or shock mounting surface planarity suitable screws M3 (ISO 7380) max. torque 0,5Nm MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 07/25/2019 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 3 of 3 Specifications are subject to change without notice