Data Sheet for Joysticks Series 826 Finger Joystick Outstanding quality of mechanics and sensors 1 to 2 axes For demanding applications Conductive plastic potentiometers or hall sensors on the outside of the housing Various configuration options for switches, latching positions, etc. Protection class up to IP65 above panel on request Optionally redundant (dual-ganged potentiometers) Optionally with current (only for Hall sensors) or USB interface The 826 series joysticks are ideal for demanding applications with up to two axes, where quality, durability and reliability are paramount and the sensor technology has to meet special requirements. The mechanically separate shafts for the two axes allow special adaptations to be made: For example, detent points can be realized and a friction brake can be installed. In addition, up to 6 microswitches can be mounted on the outside of the housing. Technical Data Joystick Angle of Movement X+Y Axis Return to Center Accuracy X+Y Axis Operating Force X+Y Axis Protection Grade (above panel) IP54, IP65 if sealed mounting plate is selected (option „MIP“) Operating Temperature Panel Thickness * only valid for potentiometer version without USB Handle types Handle “3”, round no pushbutton Handle “4”, conical no pushbutton Handle “6”, cylindrical 1 pushbutton MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice

Data Sheet for Joysticks Series 826 Finger Joystick Please contact us for information regarding stock articles, delivery times and minimum order quantities. Order Code Description Series Axes: 1 Axis 2 Axes 2 Axes with pushbutton 1 Axis with pushbutton Selection: standard=black/bold, possible options=grey/italics 826 1 2 Rubber boot Return Mechanism: Spring return No spring return Friction clutch, with detent in center position Friction clutch, w/o detent Handle versions: Ball-Tip, Ø25 mm Cylindrical handle, with pushbutton, Ø30 mm Cylindrical handle, without pushbutton, Ø30 mm Conical handle,...

Data Sheet for Joysticks Series 826 Finger Joystick Drawing Mounting Holes M3 4x, 12 deep Potentiometer X-Axis Micro Switches (optional) Center Detect (optional) - in the presence of handle “6” two microswitches will be attached to the housing instead of a single center detecting switch. Dimensions in mm PANEL CUT-OUT (Standard) 4x M3 Rubber Boot Fixation Ring Rubber Gasket PANEL CUT-OUT HANDLE 6 MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice Date:...

Data Sheet for Joysticks Series 826 Finger Joystick Pushbutton & Micro Switches The 826 series joysticks offer the option of integrating microswitches for deflection-dependent switch actuation. Three different angles can be defined per axis, e.g. one switch to detect the centre position of the joystick handle plus one switch each at +10° and -10°. Due to the large number of different combinations we cannot give a complete list of order codes. We recommend that you contact us personally to determine the optimum solution for your needs. Technical Data Micro Switch Center Detect SCHEME (Standard)...

Data Sheet for Joysticks Series 826 Finger Joystick Technical data Hall sensor option H0505 Supply voltage Current consumption Output signal Load resistance Independent linearity Temperature drift output Temperature drift center pos. Insulation voltage Insulation resistance Technical data Hall sensor option H2405 Supply voltage Current consumption Output signal Load resistance Independent linearity Insulation voltage Insulation resistance Technical data Hall sensor option H2442 Supply voltage Output signal Load resistance Independent linearity Insulation voltage Insulation resistance Limiters...

Data Sheet for Joysticks Series 826 Finger Joystick USB specifications (sensor/output options 5 and 6) Supply voltage Operating systems: Windows 7, Windows 8.1, Windows 10, Linux depending on kernel configuration Cable (included) USB cable (length approx. 198 cm) with USB type A plug Attached to the joystick body is the PCB for the USB interface. There is no IP protection for the PCB. Power is supplied to the joystick via the interface cable. Most Windows and Linux versions recognize the device without additional drivers. There are two different configurations of the joystick available according...