Data Sheet for Linear SensorsMagnetic (magnetostrictive) linear transducer with analogue output The displacement transducers of the IMS series are designed for hydraulic applications. ■ High degree of protection IP67 and 350 bar (max 500 bar peak) operating pressure ■ With external cursor - encapsulation of the sensor element ■ Mounting via internal or external flange ■ Measuring strokes from 50 mm to 4000 mm The sensors are designed for an operating pressure of 350 bar with peak values of 500 bar. The distance measurement takes place via an external cursor. Effective electrical travel 1 Independent linearity (best straight line) 1.) Output signal Theoretical resolution 1.) Backlash (Hysteresis) 1.) Updaterate Supply voltage Power consumption (no load) Output load Power ripple Output value Alarm output value Insulation voltage!) < ±0,02% (Min. ± 0,060 mm) 0,1..5,1 V / 0,1..10,1 V / 4..20 mA / Start-Stop (only internal flange) Almost infinite (signal noise 10 pm) <±0,005% 1 ms (50..1000 mm) / 1,5 ms (1100..2000 mm) / 2 ms (>2000 mm) 18..30 V (optional 12 V up to max. 1200 mm travel) <40 mA (load at output start / stop: 300Q) > 5 kOhm < 1Vpp < 12 V @ < 30 mA 10,5 V @ 21 mA 100 V Reverse polarity protection / overvoltage protection: Yes Mechanical stroke 1.) Lifetime (90% effective electrical travel) 2.) Max. operational speed Max. acceleration Operational temperature Storage temperature Protection grade (IEC60529) MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 07/22/2019 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 1 of 6 Specifications are subject to change without notice

Magnetic (magnetostrictive) linear transducer with analogue output Series IMS Mechanical Data, Environmental Conditions, Miscellaneous Vibration (IEC 68-2-6, Test Fc) Shock (IEC 68-2-27, Test Ea) Housing length: + 131,5 mm internal flange + 140,3 mm external flange Mounting parts (included in delivery) Cursor Material housing Material push rod Electrical connection Sensor mounting 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para. 5.3.1 without load collectives MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Tel.:...

Data Sheet for Linear SensorsMagnetic (magnetostrictive) linear transducer with analogue outputOrder Code Description Series: Effective electrical travel: 50 mm 100 mm 130 mm 150 mm 200 mm 225 mm 300 mm 400 mm 450 mm 500 mm 600 mm 700 mm 750 mm 800 mm 900 mm 1000 mm 1250 mm 1500 mm 1750 mm 2000 mm 2250 mm 2500 mm 2750 mm 3000 mm 3250 mm 3500 mm 3750 mm 4000 mm Electrical connection: 5 pole plug (only external flange) Round cable 1 m (only internal flange) Option cable length in m Output signal: 0,1..5,1 V (12 V max. 1200 mm) 0,1..10,1 V (18..30 V) 4..20 mA (18..30 V) Option 20..4 mA (18..30 V)...

Data Sheet for Linear SensorsMagnetic (magnetostrictive) linear transducer with analogue outputDrawing External flangue Internal flangue Magnetic cursor Included in order of cursor P22/23: Brass nuts M4 Brass washers D4 Brass screws M4x25 MEGATRON Elektronik GmbH & Co. KG ■ Hermann-Oberth-Strasse 7 ■ 85640 Putzbrunn / Munich Date: 07/22/2019 Tel.: +49 89 46094-0 ■ Fax: +49 89 46094-201 ■ www.megatron.de ■ [email protected] Page: 4 of 6 Specifications are subject to change without notice

Data Sheet for Linear Sensors Series IMS Magnetic (magnetostrictive) linear transducer with analogue output Mounting internal flange non-magnetic spacer cable clamp for cable ø 5-6.5mm For 4..20 mA version the quote must be 30mm fixing screw seat ISO 7434-M4x10-N MEGATRON Elektronik GmbH & Co. KG ▪ Hermann-Oberth-Strasse 7 ▪ 85640 Putzbrunn / Munich Tel.: +49 89 46094-0 ▪ Fax: +49 89 46094-201 ▪ www.megatron.de ▪ [email protected] Specifications are subject to change without notice cable clamp for cable ø 5-6mm Date: Page:

Data Sheet for Linear SensorsMagnetic (magnetostrictive) linear transducer with analogue outputMounting external flange THREAD M18x1,5 The seal surface must be free from winding or longitudinal scratches Ro 1.6|jm for seals with NON pulsating pressure Ro 0.8|jm for seals with pulsating pressure Suggested O-Ring: PARKER 6-349 15.4x2.1 Material: Viton 90° Shore-A Mixes: PARKER N552-90 x—n THREAD 3/4"-16UNF The seal surface must be free from winding or longitudinal scratches Ro 1.6|jm for seals with NON pulsating pressure Ro 0.8|jm for seals with pulsating pressure Suggested O-Ring: PARKER 3-908...